avrdude.1: document the memtypes for -U

doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@500 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2005-09-16 20:38:29 +00:00
parent f6c2213871
commit 66a5f13b2c
3 changed files with 66 additions and 1 deletions

View File

@ -1,3 +1,9 @@
2005-09-16 Joerg Wunsch <j@uriah.heep.sax.de>
* avrdude.1: document the memtypes for -U
* doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page
2005-09-16 Joerg Wunsch <j@uriah.heep.sax.de> 2005-09-16 Joerg Wunsch <j@uriah.heep.sax.de>
* doc/Makefile.am: add logic to detect the misf^H^H^H^H * doc/Makefile.am: add logic to detect the misf^H^H^H^H

View File

@ -357,7 +357,39 @@ the fuse bits.
.Xc .Xc
Perform a memory operation as indicated. The Perform a memory operation as indicated. The
.Ar memtype .Ar memtype
field specifies the memory type to operate on. The field specifies the memory type to operate on.
The available memory types are device-dependant, the actual
configuration can be viewed with the
.Cm part
command in terminal mode.
Typically, a device's memory configuration at least contains
the memory types
.Ar flash
and
.Ar eeprom .
All memory types currently known are:
.Bl -tag -width "calibration" -compact
.It calibration
One or more bytes of RC oscillator calibration data.
.It eeprom
The EEPROM of the device.
.It efuse
The extended fuse byte.
.It flash
The flash ROM of the device.
.It fuse
The fuse byte in devices that have only a single fuse byte.
.It hfuse
The high fuse byte.
.It lfuse
The low fuse byte.
.It lock
The lock byte.
.It signature
The three device signature bytes (device ID).
.El
.Pp
The
.Ar op .Ar op
field specifies what operation to perform: field specifies what operation to perform:
.Bl -tag -width noreset .Bl -tag -width noreset

View File

@ -572,6 +572,33 @@ mulitple memories on the same command-line invocation. The
the @option{-v} option on the command line or the @code{part} command from the @option{-v} option on the command line or the @code{part} command from
terminal mode to display all the memory types supported by a particular terminal mode to display all the memory types supported by a particular
device. device.
Typically, a device's memory configuration at least contains
the memory types
@code{flash}
and
@code{eeprom}.
All memory types currently known are:
@table @code
@item calibration
One or more bytes of RC oscillator calibration data.
@item eeprom
The EEPROM of the device.
@item efuse
The extended fuse byte.
@item flash
The flash ROM of the device.
@item fuse
The fuse byte in devices that have only a single fuse byte.
@item hfuse
The high fuse byte.
@item lfuse
The low fuse byte.
@item lock
The lock byte.
@item signature
The three device signature bytes (device ID).
@end table
The @var{op} field specifies what operation to perform: The @var{op} field specifies what operation to perform:
@table @code @table @code