From 6183fc22a2d862346362b835a3dc6c3b941c2c23 Mon Sep 17 00:00:00 2001 From: bdean Date: Sun, 24 Aug 2003 18:05:46 +0000 Subject: [PATCH] Remove debugging printf. Update manual to reflect the new -U option. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@342 81a1dc3b-b13d-400b-aceb-764788c761c2 --- doc/avrdude.texi | 71 ++++++++++++++++++++++++++++++++++++++---------- main.c | 2 -- 2 files changed, 56 insertions(+), 17 deletions(-) diff --git a/doc/avrdude.texi b/doc/avrdude.texi index 7118baf8..3de4665a 100644 --- a/doc/avrdude.texi +++ b/doc/avrdude.texi @@ -405,6 +405,31 @@ Tells AVRDUDE to enter the interactive ``terminal'' mode instead of up- or downloading files. See below for a detailed description of the terminal mode. +@item -U @var{memtype}:@var{op}:@var{filename}[:@var{format}] +Perform a memory operation, equivalent to specifing the @option{-m}, +@option{-i} or @option{-o}, and @option{-f} options, except that +multiple @option{-U} optins can be specified in order to operate on +mulitple memories on the same command-line invocation. The +@var{memtype} field specifies the memory type to operate on. The +@var{op} field specifies what operation to perform: + +@table @code +@itemx r +read the specified device memory and write to the specified file + +@itemx w +read the specified file and write it to the specified device memory + +@itemx v +read the specified device memory and the specified file and perform a verify operation + +@end table + +The @var{filename} field indicates the name of the file to read or +write. The @var{format} field is optional and contains the format of +the file to read or write. See the @option{-f} option for possible +values. + @item -v Enable verbose output. @@ -446,27 +471,37 @@ STK500 programmer connected to the default serial port: @example @cartouche -% avrdude -p m128 -c stk500 -y -e -i m128diag.hex +% avrdude -p m128 -e -U flash:w:diag.hex avrdude: AVR device initialized and ready to accept instructions + +Reading | ################################################## | 100% 0.03s + avrdude: Device signature = 0x1e9702 avrdude: erasing chip -avrdude: erase-rewrite cycle count is now 52 avrdude: done. -avrdude: reading input file "m128diag.hex" -avrdude: input file m128diag.hex auto detected as Intel Hex -avrdude: writing flash (18130 bytes): - 18175 -avrdude: 18176 bytes of flash written -avrdude: verifying flash memory against m128diag.hex: +avrdude: performing op: 1, flash, 0, diag.hex +avrdude: reading input file "diag.hex" +avrdude: input file diag.hex auto detected as Intel Hex +avrdude: writing flash (19278 bytes): + +Writing | ################################################## | 100% 7.60s + +avrdude: 19456 bytes of flash written +avrdude: verifying flash memory against diag.hex: +avrdude: load data flash data from input file diag.hex: +avrdude: input file diag.hex auto detected as Intel Hex +avrdude: input file diag.hex contains 19278 bytes avrdude: reading on-chip flash data: - 18175 + +Reading | ################################################## | 100% 6.83s + avrdude: verifying ... -avrdude: 18176 bytes of flash verified +avrdude: 19278 bytes of flash verified avrdude done. Thank you. -% +% @end cartouche @end example @@ -477,14 +512,20 @@ programmer and save it in raw binary format in the file named @example @cartouche -% avrdude -p m128 -c stk500 -f r -o m128diag.flash +% avrdude -p m128 -e -U flash:r:diag.flash:r avrdude: AVR device initialized and ready to accept instructions + +Reading | ################################################## | 100% 0.03s + avrdude: Device signature = 0x1e9702 -avrdude: current erase-rewrite cycle count is 52 (if being tracked) +avrdude: erasing chip +avrdude: done. avrdude: reading flash memory: -131071 -avrdude: writing output file "m128diag.flash" + +Reading | ################################################## | 100% 46.10s + +avrdude: writing output file "diag.flash" avrdude done. Thank you. diff --git a/main.c b/main.c index 4bbd932f..c05d5af5 100644 --- a/main.c +++ b/main.c @@ -1380,8 +1380,6 @@ int main(int argc, char * argv []) for (ln=lfirst(updates); ln; ln=lnext(ln)) { upd = ldata(ln); - fprintf(stderr, "%s: performing op: %d, %s, %d, %s\n", - progname, upd->op, upd->memtype, upd->format, upd->filename); rc = do_op(pgm, p, upd, nowrite, verify); if (rc) { exitrc = 1;