Submitted by Andrew O. Shadoura:

bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2

ChangeLog

@@ -1,3 +1,16 @@
+2009-02-17  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
+
+	Submitted by Andrew O. Shadoura:
+	bug #25156: add direct SPI transfer mode
+	* bitbang.c: Implement direct SPI transfers.
+	* bitbang.h: (Ditto.)
+	* par.c: (Ditto.)
+	* pgm.c: (Ditto.)
+	* pgm.h: (Ditto.)
+	* term.c: Add the "spi" and "pgm" commands.
+	* avrdude.1: Document the changes.
+	* doc/avrdude.texi: (Ditto.)
+
 2009-02-17  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
 
 	Submitted by Limor ("Lady Ada"):

NEWS

@@ -49,6 +49,8 @@ Current:
   * Add preliminary support for ATxmega128A1 for the JTAG ICE mkII using
     JTAG.
 
+  * Add support for direct SPI transfers (bug #25156).
+
   * Bugfixes.
 
 Version 5.5:

avrdude.1

@@ -1,6 +1,6 @@
 .\"
 .\" avrdude - A Downloader/Uploader for AVR device programmers
-.\" Copyright (C) 2001, 2002, 2003, 2005, 2006, 2007, 2008  Joerg Wunsch
+.\" Copyright (C) 2001, 2002, 2003, 2005 - 2009  Joerg Wunsch
 .\"
 .\" This program is free software; you can redistribute it and/or modify
 .\" it under the terms of the GNU General Public License as published by
@@ -679,13 +679,21 @@ feature of an AVR part that is not directly supported by
 .Nm ,
 this command allows you to use it, even though
 .Nm
-does not implement the command.
+does not implement the command. When using direct SPI mode, up to 3 bytes
+can be omitted.
 .It Ar sig
 Display the device signature bytes.
+.It Ar spi
+Enter direct SPI mode.  The
+.Em pgmled
+pin acts as slave select.
+.Em Only supported on parallel bitbang programmers.
 .It Ar part
 Display the current part settings and parameters.  Includes chip
 specific information including all memory types supported by the
 device, read/write timing, etc.
+.It Ar pgm
+Return to programming mode (from direct SPI mode).
 .It Ar vtarg voltage
 Set the target's supply voltage to
 .Ar voltage

bitbang.c

@@ -225,6 +225,39 @@ int bitbang_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
   return 0;
 }
 
+/*
+ * transmit bytes via SPI and return the results; 'cmd' and
+ * 'res' must point to data buffers
+ */
+int bitbang_spi(PROGRAMMER * pgm, unsigned char cmd[],
+                   unsigned char res[], int count)
+{
+  int i;
+
+  pgm->setpin(pgm, pgm->pinno[PIN_LED_PGM], 0);
+
+  for (i=0; i<count; i++) {
+    res[i] = bitbang_txrx(pgm, cmd[i]);
+  }
+
+  pgm->setpin(pgm, pgm->pinno[PIN_LED_PGM], 1);
+
+  if(verbose >= 2)
+	{
+        fprintf(stderr, "bitbang_cmd(): [ ");
+        for(i = 0; i < count; i++)
+            fprintf(stderr, "%02X ", cmd[i]);
+        fprintf(stderr, "] [ ");
+        for(i = 0; i < count; i++)
+		{
+            fprintf(stderr, "%02X ", res[i]);
+		}
+        fprintf(stderr, "]\n");
+	}
+
+  return 0;
+}
+
 
 /*
  * issue the 'chip erase' command to the AVR device

bitbang.h

@@ -39,6 +39,8 @@ int  bitbang_pgm_led        (PROGRAMMER * pgm, int value);
 int  bitbang_vfy_led        (PROGRAMMER * pgm, int value);
 int  bitbang_cmd            (PROGRAMMER * pgm, unsigned char cmd[4],
                                 unsigned char res[4]);
+int  bitbang_spi            (PROGRAMMER * pgm, unsigned char cmd[],
+                                unsigned char res[], int count);
 int  bitbang_chip_erase     (PROGRAMMER * pgm, AVRPART * p);
 int  bitbang_program_enable (PROGRAMMER * pgm, AVRPART * p);
 void bitbang_powerup        (PROGRAMMER * pgm);

doc/avrdude.texi

@@ -30,7 +30,7 @@ For avrdude version @value{VERSION}, @value{UPDATED}.
 
 Copyright @copyright{} 2003, 2005 Brian Dean
 
-Copyright @copyright{} 2006 - 2008 J@"org Wunsch
+Copyright @copyright{} 2006 - 2009 J@"org Wunsch
 
 Permission is granted to make and distribute verbatim copies of
 this manual provided the copyright notice and this permission notice
@@ -1066,16 +1066,24 @@ Perform a chip erase.
 Send raw instruction codes to the AVR device.  If you need access to a
 feature of an AVR part that is not directly supported by AVRDUDE, this
 command allows you to use it, even though AVRDUDE does not implement the
-command.
+command.   When using direct SPI mode, up to 3 bytes
+can be omitted.
 
 @item sig
 Display the device signature bytes.
 
+@item spi
+Enter direct SPI mode.  The @emph{pgmled} pin acts as slave select.
+@emph{Only supported on parallel bitbang programmers.}
+
 @item part
 Display the current part settings and parameters.  Includes chip
 specific information including all memory types supported by the
 device, read/write timing, etc.
 
+@item pgm
+Return to programming mode (from direct SPI mode).
+
 @item ?
 @itemx help
 Give a short on-line summary of the available commands.

par.c

@@ -416,6 +416,7 @@ void par_initpgm(PROGRAMMER * pgm)
   pgm->program_enable = bitbang_program_enable;
   pgm->chip_erase     = bitbang_chip_erase;
   pgm->cmd            = bitbang_cmd;
+  pgm->spi            = bitbang_spi;
   pgm->open           = par_open;
   pgm->close          = par_close;
   pgm->setpin         = par_setpin;

pgm.c

@@ -118,6 +118,7 @@ PROGRAMMER * pgm_new(void)
    * assigned before they are called
    */
   pgm->cmd            = NULL;
+  pgm->spi            = NULL;
   pgm->paged_write    = NULL;
   pgm->paged_load     = NULL;
   pgm->write_setup    = NULL;

pgm.h

@@ -78,6 +78,8 @@ typedef struct programmer_t {
   int  (*chip_erase)     (struct programmer_t * pgm, AVRPART * p);
   int  (*cmd)            (struct programmer_t * pgm, unsigned char cmd[4], 
                           unsigned char res[4]);
+  int  (*spi)            (struct programmer_t * pgm, unsigned char cmd[], 
+                          unsigned char res[], int count);
   int  (*open)           (struct programmer_t * pgm, char * port);
   void (*close)          (struct programmer_t * pgm);
   int  (*paged_write)    (struct programmer_t * pgm, AVRPART * p, AVRMEM * m, 

term.c

@@ -88,6 +88,11 @@ static int cmd_fosc  (PROGRAMMER * pgm, struct avrpart * p,
 static int cmd_sck   (PROGRAMMER * pgm, struct avrpart * p,
 		      int argc, char *argv[]);
 
+static int cmd_spi   (PROGRAMMER * pgm, struct avrpart * p,
+		      int argc, char *argv[]);
+
+static int cmd_pgm   (PROGRAMMER * pgm, struct avrpart * p,
+		      int argc, char *argv[]);
 
 struct command cmd[] = {
   { "dump",  cmd_dump,  "dump memory  : %s <memtype> <addr> <N-Bytes>" },
@@ -102,6 +107,8 @@ struct command cmd[] = {
   { "varef", cmd_varef, "set <V[aref]> (STK500 only)" },
   { "fosc",  cmd_fosc,  "set <oscillator frequency> (STK500 only)" },
   { "sck",   cmd_sck,   "set <SCK period> (STK500 only)" },
+  { "spi",   cmd_spi,   "enter direct SPI mode" },
+  { "pgm",   cmd_pgm,   "return to programming mode" },
   { "help",  cmd_help,  "help" },
   { "?",     cmd_help,  "help" },
   { "quit",  cmd_quit,  "quit" }
@@ -111,7 +118,7 @@ struct command cmd[] = {
 
 
 
-
+static int spi_mode = 0;
 
 static int nexttok(char * buf, char ** tok, char ** next)
 {
@@ -445,8 +452,18 @@ static int cmd_send(PROGRAMMER * pgm, struct avrpart * p,
     return -1;
   }
 
-  if (argc != 5) {
+  if (spi_mode && (pgm->spi == NULL)) {
-    fprintf(stderr, "Usage: send <byte1> <byte2> <byte3> <byte4>\n");
+    fprintf(stderr,
+	    "The %s programmer does not support direct SPI transfers.\n",
+	    pgm->type);
+    return -1;
+  }
+
+
+  if ((argc > 5) || ((argc < 5) && (!spi_mode))) {
+    fprintf(stderr, spi_mode?
+      "Usage: send <byte1> [<byte2> [<byte3> [<byte4>]]]\n":
+      "Usage: send <byte1> <byte2> <byte3> <byte4>\n");
     return -1;
   }
 
@@ -465,7 +482,10 @@ static int cmd_send(PROGRAMMER * pgm, struct avrpart * p,
 
   pgm->err_led(pgm, OFF);
 
-  pgm->cmd(pgm, cmd, res);
+  if (spi_mode)
+    pgm->spi(pgm, cmd, res, argc-1);
+  else
+    pgm->cmd(pgm, cmd, res);
 
   /*
    * display results
@@ -724,6 +744,22 @@ static int cmd_help(PROGRAMMER * pgm, struct avrpart * p,
   return 0;
 }
 
+static int cmd_spi(PROGRAMMER * pgm, struct avrpart * p,
+        int argc, char * argv[])
+{
+  pgm->setpin(pgm, pgm->pinno[PIN_AVR_RESET], 1);
+  spi_mode = 1;
+  return 0;
+}
+
+static int cmd_pgm(PROGRAMMER * pgm, struct avrpart * p,
+        int argc, char * argv[])
+{
+  pgm->setpin(pgm, pgm->pinno[PIN_AVR_RESET], 0);
+  spi_mode = 0;
+  pgm->initialize(pgm, p);
+  return 0;
+}
 
 static int tokenize(char * s, char *** argv)
 {