avr/avrdude
2
0
Fork 0
mirror of https://github.com/mariusgreuel/avrdude.git synced 2025-09-28 15:05:27 +00:00
Code Issues Projects Releases Wiki Activity

Describe -A in the man and .texi documentation

Browse Source
This commit is contained in:
Stefan Rueger
2022-04-29 00:14:45 +01:00
parent f47ec634f8
commit 580c37fbfe
2 changed files with 35 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
src/doc/avrdude.texi
View File

@@ -321,13 +321,13 @@ via a serial link (@url{https://github.com/ElTangas/jtag2updi}).
The Micronucleus bootloader is supported for both protocol version V1
and V2. As the bootloader does not support reading from flash memory,
use the @code{-V} option to prevent AVRDUDE from verifing the flash memory.
use the @code{-V} option to prevent AVRDUDE from verifying the flash memory.
See the section on @emph{extended parameters}
below for Micronucleus specific options.
The Teensy bootloader is supported for all AVR boards.
As the bootloader does not support reading from flash memory,
use the @code{-V} option to prevent AVRDUDE from verifing the flash memory.
use the @code{-V} option to prevent AVRDUDE from verifying the flash memory.
See the section on @emph{extended parameters}
below for Teensy specific options.
@@ -495,6 +495,16 @@ without patching your system wide configuration file. It can be used
several times, the files are read in same order as given on the command
line.
@item -A
Disable the automatic removal of trailing-0xFF sequences in file
input that is to be programmed to flash and in AVR reads from
flash memory. Normally, trailing 0xFFs can be discarded, as flash
programming requires the memory be erased to 0xFF beforehand. -A
should be used when the programmer hardware, or bootloader
software for that matter, does not carry out chip erase and
instead handles the memory erase on a page level. The popular
Arduino bootloader exhibits this behaviour; for this reason -A is
engaged by default when specifying -c arduino.
@item -D
Disable auto erase for flash. When the -U option with flash memory is
@@ -506,6 +516,7 @@ use page erase before writing each page so no explicit chip erase
is required.
Note however that any page not affected by the current operation
will retain its previous contents.
Setting -D implies -A.
@item -e
Causes a chip erase to be executed. This will reset the contents of the