* avrdude.1: Added info about BusPirate.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@877 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Michal Ludvig 2009-11-04 03:32:55 +00:00
parent da6d670faf
commit 56bf53abd5
2 changed files with 14 additions and 0 deletions

View File

@ -2,6 +2,7 @@
* buspirate.c: Implemented 'BinMode' support for * buspirate.c: Implemented 'BinMode' support for
firmware 2.7 and higher. firmware 2.7 and higher.
* avrdude.1: Added info about BusPirate.
2009-11-03 Michal Ludvig <mludvig@logix.net.nz> 2009-11-03 Michal Ludvig <mludvig@logix.net.nz>

View File

@ -110,6 +110,12 @@ both parallel and serial
The Arduino (which is very similar to the STK500 1.x) is supported via The Arduino (which is very similar to the STK500 1.x) is supported via
its own programmer type specification ``arduino''. its own programmer type specification ``arduino''.
.Pp .Pp
The BusPirate is a versatile tool that can also be used as an AVR programmer.
Older BusPirate firmwares are supported in ASCII mode, for newer
firmwares (2.7+) avrdude automatically selects binary mode. Should there
be a problem with the binary mode use '-x ascii' to prefer ascii
mode with newer firmwares.
.Pp
Atmel's STK600 programmer is supported in ISP and high-voltage Atmel's STK600 programmer is supported in ISP and high-voltage
programming modes, and connects through the USB. programming modes, and connects through the USB.
For ATxmega devices, the STK600 is supported in PDI mode. For ATxmega devices, the STK600 is supported in PDI mode.
@ -843,6 +849,13 @@ only if your
.Ar AVR910 .Ar AVR910
programmer creates errors during initial sequence. programmer creates errors during initial sequence.
.El .El
.It Ar buspirate
.Bl -tag -offset indent -width indent
.It Ar ascii
Use ASCII mode even when the firmware supports BinMode (binary mode).
BinMode is supported in firmware 2.7 and newer, older FW's either don't
have BinMode or their BinMode is buggy.
.El
.El .El
.Sh FILES .Sh FILES
.Bl -tag -offset indent -width /dev/ppi0XXX .Bl -tag -offset indent -width /dev/ppi0XXX