Udate the avrdude.conf introductory documentation
This commit is contained in:
Stefan Rueger
parent
6afa115a5f
commit
4ada98a1a8
|
|
@ -12,7 +12,7 @@
|
|||
#
|
||||
# DO NOT MODIFY THIS FILE. Modifications will be overwritten the next
|
||||
# time a "make install" is run. For user-specific additions, use the
|
||||
# "-C +filename" commandline option.
|
||||
# "-C +filename" command line option.
|
||||
#
|
||||
# Possible entry formats are:
|
||||
#
|
||||
|
|
@ -34,12 +34,12 @@
|
|||
# rdyled = <num> ; # pin number
|
||||
# pgmled = <num> ; # pin number
|
||||
# vfyled = <num> ; # pin number
|
||||
# usbvid = <hexnum>; # USB VID (Vendor ID)
|
||||
# usbpid = <hexnum> [, <hexnum> ...] # USB PID (Product ID) (1)
|
||||
# usbdev = <interface>; # USB interface or other device info
|
||||
# usbvendor = <vendorname>; # USB Vendor Name
|
||||
# usbproduct = <productname>; # USB Product Name
|
||||
# usbsn = <serialno>; # USB Serial Number
|
||||
# usbvid = <hexnum> ; # USB VID (Vendor ID)
|
||||
# usbpid = <hexnum> [, <hexnum> ...] ; # USB PID (Product ID) (1)
|
||||
# usbdev = <interface> ; # USB interface or other device info
|
||||
# usbvendor = <vendorname> ; # USB Vendor Name
|
||||
# usbproduct = <productname> ; # USB Product Name
|
||||
# usbsn = <serialno> ; # USB Serial Number
|
||||
# hvupdi_support = <num> [, <num>, ... ] ; # UPDI HV Variants Support
|
||||
#
|
||||
# To invert a bit, use = ~ <num>, the spaces are important.
|
||||
|
|
@ -51,29 +51,31 @@
|
|||
# ;
|
||||
#
|
||||
# part
|
||||
# id = <id> ; # quoted string
|
||||
# desc = <description> ; # quoted string
|
||||
# id = <id> ; # quoted string
|
||||
# family_id = <id> ; # quoted string, eg, "megaAVR" or "tinyAVR"
|
||||
# hvupdi_variant = <num> ; # numeric -1 (n/a) or 0..2
|
||||
# devicecode = <num> ; # deprecated, use stk500_devcode
|
||||
# stk500_devcode = <num> ; # numeric
|
||||
# avr910_devcode = <num> ; # numeric
|
||||
# has_jtag = <yes/no> ; # part has JTAG i/f
|
||||
# has_debugwire = <yes/no> ; # part has debugWire i/f
|
||||
# has_pdi = <yes/no> ; # part has PDI i/f
|
||||
# has_updi = <yes/no> ; # part has UPDI i/f
|
||||
# has_tpi = <yes/no> ; # part has TPI i/f
|
||||
# devicecode = <num> ; # deprecated, use stk500_devcode
|
||||
# stk500_devcode = <num> ; # numeric
|
||||
# avr910_devcode = <num> ; # numeric
|
||||
# is_at90s1200 = <yes/no> ; # AT90S1200 part
|
||||
# is_avr32 = <yes/no> ; # AVR32 part
|
||||
# signature = <num> <num> <num> ; # signature bytes
|
||||
# usbpid = <num> ; # DFU USB PID
|
||||
# chip_erase_delay = <num> ; # micro-seconds
|
||||
# reset = dedicated | io;
|
||||
# retry_pulse = reset | sck;
|
||||
# pgm_enable = <instruction format> ;
|
||||
# chip_erase = <instruction format> ;
|
||||
# reset = dedicated | io ;
|
||||
# retry_pulse = reset | sck ;
|
||||
# chip_erase_delay = <num> ; # chip erase delay (us)
|
||||
# # STK500 parameters (parallel programming IO lines)
|
||||
# pagel = <num> ; # pin name in hex, i.e., 0xD7
|
||||
# bs2 = <num> ; # pin name in hex, i.e., 0xA0
|
||||
# serial = <yes/no> ; # can use serial downloading
|
||||
# parallel = <yes/no/pseudo>; # can use par. programming
|
||||
# parallel = <yes/no/pseudo> ; # can use par. programming
|
||||
# # STK500v2 parameters, to be taken from Atmel's XML files
|
||||
# timeout = <num> ;
|
||||
# stabdelay = <num> ;
|
||||
|
|
@ -85,52 +87,59 @@
|
|||
# predelay = <num> ;
|
||||
# postdelay = <num> ;
|
||||
# pollmethod = <num> ;
|
||||
# mode = <num> ;
|
||||
# delay = <num> ;
|
||||
# blocksize = <num> ;
|
||||
# readsize = <num> ;
|
||||
# hvspcmdexedelay = <num> ;
|
||||
# # STK500v2 HV programming parameters, from XML
|
||||
# pp_controlstack = <num>, <num>, ...; # PP only
|
||||
# hvsp_controlstack = <num>, <num>, ...; # HVSP only
|
||||
# hventerstabdelay = <num>;
|
||||
# progmodedelay = <num>; # PP only
|
||||
# latchcycles = <num>;
|
||||
# togglevtg = <num>;
|
||||
# poweroffdelay = <num>;
|
||||
# resetdelayms = <num>;
|
||||
# resetdelayus = <num>;
|
||||
# hvleavestabdelay = <num>;
|
||||
# resetdelay = <num>;
|
||||
# synchcycles = <num>; # HVSP only
|
||||
# chiperasepulsewidth = <num>; # PP only
|
||||
# chiperasepolltimeout = <num>;
|
||||
# chiperasetime = <num>; # HVSP only
|
||||
# programfusepulsewidth = <num>; # PP only
|
||||
# programfusepolltimeout = <num>;
|
||||
# programlockpulsewidth = <num>; # PP only
|
||||
# programlockpolltimeout = <num>;
|
||||
# pp_controlstack = <num>, <num>, ... ; # PP only
|
||||
# hvsp_controlstack = <num>, <num>, ... ; # HVSP only
|
||||
# flash_instr = <num>, <num>, <num> ;
|
||||
# eeprom_instr = <num>, <num>, ... ;
|
||||
# hventerstabdelay = <num> ;
|
||||
# progmodedelay = <num> ; # PP only
|
||||
# latchcycles = <num> ;
|
||||
# togglevtg = <num> ;
|
||||
# poweroffdelay = <num> ;
|
||||
# resetdelayms = <num> ;
|
||||
# resetdelayus = <num> ;
|
||||
# hvleavestabdelay = <num> ;
|
||||
# resetdelay = <num> ;
|
||||
# synchcycles = <num> ; # HVSP only
|
||||
# chiperasepulsewidth = <num> ; # PP only
|
||||
# chiperasepolltimeout = <num> ;
|
||||
# chiperasetime = <num> ; # HVSP only
|
||||
# programfusepulsewidth = <num> ; # PP only
|
||||
# programfusepolltimeout = <num> ;
|
||||
# programlockpulsewidth = <num> ; # PP only
|
||||
# programlockpolltimeout = <num> ;
|
||||
# # JTAG ICE mkII parameters, also from XML files
|
||||
# allowfullpagebitstream = <yes/no> ;
|
||||
# enablepageprogramming = <yes/no> ;
|
||||
# idr = <num> ; # IO addr of IDR (OCD) reg.
|
||||
# rampz = <num> ; # IO addr of RAMPZ reg.
|
||||
# spmcr = <num> ; # mem addr of SPMC[S]R reg.
|
||||
# eecr = <num> ; # mem addr of EECR reg.
|
||||
# # (only when != 0x3c)
|
||||
# is_at90s1200 = <yes/no> ; # AT90S1200 part
|
||||
# is_avr32 = <yes/no> ; # AVR32 part
|
||||
# idr = <num> ; # IO addr of IDR (OCD) reg
|
||||
# rampz = <num> ; # IO addr of RAMPZ reg
|
||||
# spmcr = <num> ; # mem addr of SPMC[S]R reg
|
||||
# eecr = <num> ; # mem addr of EECR reg only when != 0x3c
|
||||
# mcu_base = <num> ;
|
||||
# nvm_base = <num> ;
|
||||
# ocd_base = <num> ;
|
||||
# ocdrev = <num> ;
|
||||
# pgm_enable = <instruction format> ;
|
||||
# chip_erase = <instruction format> ;
|
||||
#
|
||||
# memory <memtype>
|
||||
# paged = <yes/no> ; # yes / no
|
||||
# paged = <yes/no> ; # yes/no (flash only, do not use for EEPROM)
|
||||
# offset = <num> ; # memory offset
|
||||
# size = <num> ; # bytes
|
||||
# page_size = <num> ; # bytes
|
||||
# num_pages = <num> ; # numeric
|
||||
# min_write_delay = <num> ; # micro-seconds
|
||||
# max_write_delay = <num> ; # micro-seconds
|
||||
# readback_p1 = <num> ; # byte value
|
||||
# readback_p2 = <num> ; # byte value
|
||||
# pwroff_after_write = <yes/no> ; # yes / no
|
||||
# readback = <num> <num> ; # pair of byte values
|
||||
# readback_p1 = <num> ; # byte value (first component)
|
||||
# readback_p2 = <num> ; # byte value (second component)
|
||||
# pwroff_after_write = <yes/no> ; # yes/no
|
||||
# mode = <num> ; # STK500 v2 file parameter, to be taken from Atmel's XML files
|
||||
# delay = <num> ; # "
|
||||
# blocksize = <num> ; # "
|
||||
# readsize = <num> ; # "
|
||||
# read = <instruction format> ;
|
||||
# write = <instruction format> ;
|
||||
# read_lo = <instruction format> ;
|
||||
|
|
@ -144,7 +153,8 @@
|
|||
# ;
|
||||
#
|
||||
# If any of the above parameters are not specified, the default value
|
||||
# of 0 is used for numerics or the empty string ("") for string
|
||||
# of 0 is used for numerics (except for hvupdi_variant and ocdrev,
|
||||
# where the default value is -1) or the empty string ("") for string
|
||||
# values. If a required parameter is left empty, AVRDUDE will
|
||||
# complain.
|
||||
#
|
||||
|
|
@ -152,7 +162,12 @@
|
|||
# using the following syntax. In this case specified integer and
|
||||
# string values override parameter values from the parent part. New
|
||||
# memory definitions are added to the definitions inherited from the
|
||||
# parent.
|
||||
# parent. If, however, a new memory definition refers to an existing
|
||||
# one of the same name for that part then, from v7.1, the existing
|
||||
# memory definition is extended, and components overwritten with new
|
||||
# values. Assigning NULL removes an inherited SPI instruction format,
|
||||
# memory definition, control stack, eeprom or flash instruction, eg,
|
||||
# as in memory "efuse" = NULL;
|
||||
#
|
||||
# part parent <id> # quoted string
|
||||
# id = <id> ; # quoted string
|
||||
|
|
@ -181,7 +196,7 @@
|
|||
#
|
||||
# INSTRUCTION FORMATS
|
||||
#
|
||||
# Instruction formats are specified as a comma seperated list of
|
||||
# Instruction formats are specified as a comma separated list of
|
||||
# string values containing information (bit specifiers) about each
|
||||
# of the 32 bits of the instruction. Bit specifiers may be one of
|
||||
# the following formats:
|
||||
|
|
@ -190,10 +205,11 @@
|
|||
#
|
||||
# '0' = the bit is always clear on input as well as output
|
||||
#
|
||||
# 'x' = the bit is ignored on input and output
|
||||
# 'x' = the bit is ignored on input and output and set as 0
|
||||
#
|
||||
# 'a' = the bit is an address bit, the bit-number matches this bit
|
||||
# specifier's position within the current instruction byte
|
||||
# 'a' = the bit is an address bit; from v 7.1 the bit-number
|
||||
# is set to match the right bit position for the
|
||||
# instruction to "just work"
|
||||
#
|
||||
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12
|
||||
# is address bit 12 on input, a0 is address bit 0.
|
||||
|
|
@ -204,9 +220,26 @@
|
|||
#
|
||||
# Each instruction must be composed of 32 bit specifiers. The
|
||||
# instruction specification closely follows the instruction data
|
||||
# provided in Atmel's data sheets for their parts.
|
||||
# provided in Atmel's data sheets for their parts. Note that flash
|
||||
# addresses always refer to *word* addresses whilst all other
|
||||
# memory types specify *byte* addresses.
|
||||
#
|
||||
# See below for some examples.
|
||||
# Example for signature read on the ATmega328P:
|
||||
# read = "0 0 1 1 0 0 0 0", "0 0 0 x x x x x",
|
||||
# "x x x x x x a1 a0", "o o o o o o o o";
|
||||
#
|
||||
# As the address bit numbers in the SPI opcodes are highly
|
||||
# systematic, they don't really need to be specified. A compact
|
||||
# version of the format specification neither uses bit-numbers for
|
||||
# address lines nor spaces. If such a string is longer than 7
|
||||
# characters, then the characters 0, 1, x, a, i and o will be
|
||||
# recognised as the corresponding bit, whilst any of the characters
|
||||
# ., -, _ or / can act as arbitrary visual separators, which are
|
||||
# ignored. Examples:
|
||||
#
|
||||
# loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
|
||||
#
|
||||
# loadpage_lo = "0100.0000", "000x.xxxx", "xxaa.aaaa", "iiii.iiii";
|
||||
#
|
||||
#
|
||||
# The following are STK500 part device codes to use for the
|
||||
|
|
|
|||
Loading…
Reference in New Issue