avr
/
avrdude
mirror of https://github.com/mariusgreuel/avrdude.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity

patch #9328: ft245r.c: add TPI support (patches 5-7) 

Submitted by David Mosberger-Tang:
* ft245r.c (ft245r_set_bitclock): add workaround for
FT245 hardware bugs in bitclock setting

Correct baud rate calculation (multiplying with factor of 2 was wrong)
and add compile-time workaround for FTDI chips suffering for the
variable pulse-width errata.  The workaround entails always running
the chip at 3MHz and stuffing the channel with repeated bytes to
achieve the desired baudrate.

This has no effect on programming speed.  Note, however, that now a
baudrate option -b750000 has to be used to achieve maximum speed.

(Option enabled by default now.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1488 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2021-11-25 09:17:11 +00:00
parent 2015a874e0
commit 49e5f2451c
3 changed files with 61 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
ChangeLog
View File

@ -1,3 +1,10 @@
2021-11-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by David Mosberger-Tang:
patch #9328: ft245r.c: add TPI support (patches 5-7)
* ft245r.c (ft245r_set_bitclock): add workaround for
FT245 hardware bugs in bitclock setting
2021-11-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by David Mosberger-Tang:

6
NEWS
View File

@ -14,10 +14,12 @@ Current:
debuggers (JTAGICE3 with firmware 3+, AtmelICE, EDBG, mEDBG)
- UPDI support added (AVR8X family)
- TPI support for USBtinyISP
- TPI support for ft245r
- AVR Doper uses libhidapi rather than raw libusb (patch #9033)
- -P net:host:port can use IPv6 now (Posix systems only)
- New configure option: -disable-libusb_1_0
- extended UPDI device context (> 64 Ki flash)
- major overhaul of ft245r driver (patch #9327/#9328)
* New devices supported:
@ -108,11 +110,13 @@ Current:
patch #9110: Let reserved fuse bits to be read as *don't care*
patch #9253: Fix for giving terminal_mode commands more than 20 arguments
patch #9320: fix TPI RESET in bitbang.c
patch #9079: Fix ftdi_syncbb teardown (supersedes #9893)
patch #9079: Fix ftdi_syncbb teardown (supersedes #9893, superseded by #9328)
patch #9122: Fixed MISO sampling in ftdi_syncbb
patch #9123: ftdi_syncbb: use FT245R_CYCLES in ft245r_set_bitclock()
patch #8719: Support Over-the-Air bootloading with XBeeBoot
patch #9757: Fix ATtiny817 Xplained Mini programmer
patch #9327: ft245r.c: add TPI support (patches 1-4)
patch #9328: ft245r.c: add TPI support (patches 5-7)
* Internals:
- New avrdude.conf keyword "family_id", used to verify SIB attributes

56
ft245r.c
View File

@ -59,6 +59,7 @@
#include <sys/time.h>
#include <unistd.h>
#include <stdint.h>
#include <math.h>
#include "avrdude.h"
#include "libavrdude.h"
@ -113,9 +114,26 @@ void ft245r_initpgm(PROGRAMMER * pgm) {
//#define USE_INLINE_WRITE_PAGE
#define FT245R_DEBUG 0
/*
Some revisions of the FTDI chips mess up the timing in bitbang mode
unless the bitclock is set to the max (3MHz). For example, see:
http://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_120_FT232R%20Errata%20Technical%20Note.pdf
To work around this problem, set the macro below to 1 to always set
the bitclock to 3MHz and then issue the same byte repeatedly to get
the desired timing.
*/
#define FT245R_BITBANG_VARIABLE_PULSE_WIDTH_WORKAROUND 1
static struct ftdi_context *handle;
#if FT245R_BITBANG_VARIABLE_PULSE_WIDTH_WORKAROUND
static unsigned int baud_multiplier;
#else
# define baud_multiplier 1 // this let's C compiler optimize
#endif
static unsigned char ft245r_ddr;
static unsigned char ft245r_out;
@ -213,15 +231,17 @@ static int ft245r_flush(PROGRAMMER * pgm) {
static int ft245r_send2(PROGRAMMER * pgm, unsigned char * buf, size_t len,
bool discard_rx_data) {
int i;
int i, j;
for (i = 0; i < len; ++i) {
for (j = 0; j < baud_multiplier; ++j) {
if (discard_rx_data)
++rx.discard;
tx.buf[tx.len++] = buf[i];
if (tx.len >= FT245R_MIN_FIFO_SIZE)
ft245r_flush(pgm);
}
}
return 0;
}
@ -235,7 +255,7 @@ static int ft245r_send_and_discard(PROGRAMMER * pgm, unsigned char * buf,
}
static int ft245r_recv(PROGRAMMER * pgm, unsigned char * buf, size_t len) {
int i;
int i, j;
ft245r_flush(pgm);
ft245r_fill(pgm);
@ -249,8 +269,11 @@ static int ft245r_recv(PROGRAMMER * pgm, unsigned char * buf, size_t len) {
--rx.discard;
}
for (i = 0; i < len; ++i)
for (i = 0; i < len; ++i) {
buf[i] = ft245r_rx_buf_get(pgm);
for (j = 1; j < baud_multiplier; ++j)
ft245r_rx_buf_get(pgm);
}
return 0;
}
@ -298,23 +321,32 @@ static int ft245r_chip_erase(PROGRAMMER * pgm, AVRPART * p) {
static int ft245r_set_bitclock(PROGRAMMER * pgm) {
int r;
int rate = 0;
// libftdi1 multiplies bitbang baudrate by 4:
int r, rate = 0, ftdi_rate = 3000000 / 4;
/* bitclock is second. 1us = 0.000001. Max rate for ft232r 750000 */
if(pgm->bitclock) {
rate = (uint32_t)(1.0/pgm->bitclock) * FT245R_CYCLES;
rate = (uint32_t)(1.0/pgm->bitclock);
} else if (pgm->baudrate) {
rate = pgm->baudrate * FT245R_CYCLES;
rate = pgm->baudrate;
} else {
rate = 150000; /* should work for all ftdi chips and the avr default internal clock of 1MHz */
}
if (FT245R_DEBUG) {
avrdude_message(MSG_NOTICE2, " ft245r: spi bitclk %d -> ft baudrate %d\n",
rate / FT245R_CYCLES, rate);
}
r = ftdi_set_baudrate(handle, rate);
#if FT245R_BITBANG_VARIABLE_PULSE_WIDTH_WORKAROUND
if (rate > 0 && rate < ftdi_rate)
baud_multiplier = round((ftdi_rate + rate - 1) / rate);
else
baud_multiplier = 1;
#else
ftdi_rate = rate;
#endif
avrdude_message(MSG_NOTICE2,
"%s: bitclk %d -> FTDI rate %d, baud multiplier %d\n",
__func__, rate, ftdi_rate, baud_multiplier);
r = ftdi_set_baudrate(handle, ftdi_rate);
if (r) {
avrdude_message(MSG_INFO, "Set baudrate (%d) failed with error '%s'.\n",
rate, ftdi_get_error_string (handle));