From 44fe5bec2dd2f016d135f0d2f02173045d7aeef5 Mon Sep 17 00:00:00 2001 From: Stefan Rueger Date: Wed, 5 Oct 2022 23:21:52 +0100 Subject: [PATCH] Update NEWS --- NEWS | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 4 deletions(-) diff --git a/NEWS b/NEWS index 46e37c2f..9260c6cb 100644 --- a/NEWS +++ b/NEWS @@ -18,7 +18,43 @@ Changes since version 7.0: - Fix micronucleus bootloader to check for unresponsive USB devices #945 - Fix src/CMakeLists.txt to honor CMAKE_INSTALL_LIBDIR #972 - - [bug #43898] atmega644p remains stopped after JTAG transaction #366 + - [bug #43898] atmega644p remains stopped after JTAG + transaction #366 + - Wrong timings for ATmega328PB and other parts in avrdude.conf + #976 + - FT232R based programmer ATmega2560 Flash Reading Problem #995 + also #474 + - Enable avrdude to send full input file incl trailing 0xff + #936 + - Portname default for linuxspi programmer not recognized #926 + - JTAG1 unable to write fuse and lock bits #443 + - Unknown option '-s' on command line (legacy) #1032 + - STK500/arduino/xbee programmers fail EEPROM r/w for some + parts #967 also #421 + - Design issue: jtag2updi is hardcoded to fail for parts with + has_pdi = yes #1037 + - Option parse error: after -U flash:w:program_to_upload.hex, + subsequent -V ignored #441 + - Automatic verification is designed to fail for stdin #1044 + - Display correct number of bytes when input file has holes + #1005 + - Cmake installs avrdude.1 in the wrong place on Linux #1064 + - avr910 -qq prompt too verbose #1081 + - avrftdi.c: paged write can fail at addr 0 #1073 + - Permission denied accessing /sys/class/gpio/gpioX/direction + would leave pin exported #472 also #372 + - Raspberry Pi sysfs bug workaround for linuxgpio driver #386 + - Fix CMake avrdude.conf dependency to avrdude.conf.in #1035 + - CMake infrastructure does not handle documentation #947 + - New feature: ability to reset FLIPv2 targets #733 + - Fix Extended address not sent with avr109/butterfly #360 + and #454 + - Enable AVR JTAG ICE mkI program EEPROM in terminal mode + #1054 + - Make flash writes work in terminal mode #1020 + - Add support for XMEGA specific AVR109 protocol extensions + used by XBoot #200 + * Pull requests: @@ -40,9 +76,8 @@ Changes since version 7.0: and automatically do so for -c arduino #936 - Fix linuxspi default port #933 - Add support for high-voltage UPDI im jtag3.c #1015 - - Fix terminal write edge cases; - add one read mode; - add quell command #1025 + - Fix terminal write edge cases; add one read mode; add quell + command #1025 - Fix usbtiny read for parts with more than 64 kB flash #1029 - CMakeLists.txt: fix build without C++ #1016 - Provide file format I: Intel HEX with comments that ignores @@ -98,9 +133,23 @@ Changes since version 7.0: programmer using -p\? -c programmer and vice versa #1099 - Add extended parameter disable_no_cs for linuxspi programmer #1100 + - Fix avr109 extended address #1101 + - Add support for Flip 2 reset on exit #1102 + - Support for Power Debugger analog readings in terminal mode + #1105 + - Provide cached byte-wise read/write API #1106 + - AVR109: support for prodsig read and usersig read/write #1108 + - Add missing AVR variants the original JTAG ICE supports #1109 * Internals: + - Implement -c /dev_opts and -p /dev_opts + for printing avrdude.conf programmer and part entries + - Reviewed API for prgrammer functions: use const for + programmer functions where useful; add second argument for + void (*enable)(PROGRAMMER *pgm, const AVRPART *p) #1078 + + Changes in version 7.0: * Major changes compared to the previous version: