* avrdude.1: Update documentation to match the reality (device
support, memory areas). * doc/avrdude.texi: Update documentation to match the reality (device support, programmer support, memory areas). Merge buspirate-specific comments from avrdude.1. * jtagmkII.c: Add some firmware feature checks. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@913 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch
parent
2763e194d7
commit
3df5f307d7
|
|
@ -1,3 +1,12 @@
|
|||
2010-01-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||
|
||||
* avrdude.1: Update documentation to match the reality (device
|
||||
support, memory areas).
|
||||
* doc/avrdude.texi: Update documentation to match the
|
||||
reality (device support, programmer support, memory areas).
|
||||
Merge buspirate-specific comments from avrdude.1.
|
||||
* jtagmkII.c: Add some firmware feature checks.
|
||||
|
||||
2010-01-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||
|
||||
* jtagmkII.c: Implement PDI mode support for the JTAG ICE mkII
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
.\"
|
||||
.\" avrdude - A Downloader/Uploader for AVR device programmers
|
||||
.\" Copyright (C) 2001, 2002, 2003, 2005 - 2009 Joerg Wunsch
|
||||
.\" Copyright (C) 2001, 2002, 2003, 2005 - 2010 Joerg Wunsch
|
||||
.\"
|
||||
.\" This program is free software; you can redistribute it and/or modify
|
||||
.\" it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -19,7 +19,7 @@
|
|||
.\"
|
||||
.\" $Id$
|
||||
.\"
|
||||
.Dd DATE November 5, 2008
|
||||
.Dd DATE January 14, 2010
|
||||
.Os
|
||||
.Dt AVRDUDE 1
|
||||
.Sh NAME
|
||||
|
|
@ -127,8 +127,11 @@ supported on a serial port.
|
|||
.Pp
|
||||
Atmel's JTAG ICE (both mkI and mkII) is supported as well to up- or download memory
|
||||
areas from/to an AVR target (no support for on-chip debugging).
|
||||
For the JTAG ICE mkII, JTAG, debugWire and ISP mode are supported.
|
||||
For the JTAG ICE mkII, JTAG, debugWire and ISP mode are supported, provided
|
||||
it has a firmware revision of at least 4.14 (decimal).
|
||||
See below for the limitations of debugWire.
|
||||
For ATxmega devices, the JTAG ICE mkII is supported in PDI mode, provided it
|
||||
has a revision 1 hardware and firmware version of at least 5.37 (decimal).
|
||||
.Pp
|
||||
The AVR Dragon is supported in all modes (ISP, JTAG, HVSP, PP, debugWire).
|
||||
When used in JTAG and debugWire mode, the AVR Dragon behaves similar to a
|
||||
|
|
@ -141,6 +144,8 @@ In particular, the Dragon starts out with a rather fast ISP clock
|
|||
frequency, so the
|
||||
.Fl B Ar bitclock
|
||||
option might be required to achieve a stable ISP communication.
|
||||
For ATxmega devices, the AVR Dragon is supported in PDI mode, provided it
|
||||
has a firmware version of at least 6.11 (decimal).
|
||||
.Pp
|
||||
The USBasp ISP and USBtinyISP adapters are also supported, provided
|
||||
.Nm avrdude
|
||||
|
|
@ -196,9 +201,6 @@ the format. Currently, the following MCU types are understood:
|
|||
.TS
|
||||
ll.
|
||||
\fBOption tag\fP \fBOfficial part name\fP
|
||||
c128 AT90CAN128
|
||||
pwm2 AT90PWM2
|
||||
pwm3 AT90PWM3
|
||||
1200 AT90S1200
|
||||
2313 AT90S2313
|
||||
2333 AT90S2333
|
||||
|
|
@ -208,6 +210,9 @@ pwm3 AT90PWM3
|
|||
4434 AT90S4434
|
||||
8515 AT90S8515
|
||||
8535 AT90S8535
|
||||
c128 AT90CAN128
|
||||
c32 AT90CAN32
|
||||
c64 AT90CAN64
|
||||
m103 ATmega103
|
||||
m128 ATmega128
|
||||
m1280 ATmega1280
|
||||
|
|
@ -219,34 +224,72 @@ m161 ATmega161
|
|||
m162 ATmega162
|
||||
m163 ATmega163
|
||||
m164 ATmega164
|
||||
m164p ATmega164P
|
||||
m168 ATmega168
|
||||
m169 ATmega169
|
||||
m2560 ATmega2560 (**)
|
||||
m2561 ATmega2561 (**)
|
||||
m32 ATmega32
|
||||
m324 ATmega324
|
||||
m324p ATmega324P
|
||||
m325 ATmega325
|
||||
m3250 ATmega3250
|
||||
m328p ATmega328P
|
||||
m329 ATmega329
|
||||
m3290 ATmega3290
|
||||
m329p ATmega329P
|
||||
m3290p ATmega3290P
|
||||
m48 ATmega48
|
||||
m64 ATmega64
|
||||
m640 ATmega640
|
||||
m644p ATmega644P
|
||||
m644 ATmega644
|
||||
m645 ATmega645
|
||||
m6450 ATmega6450
|
||||
m649 ATmega649
|
||||
m6490 ATmega6490
|
||||
m8 ATmega8
|
||||
m8515 ATmega8515
|
||||
m8535 ATmega8535
|
||||
m88 ATmega88
|
||||
pwm2 AT90PWM2
|
||||
pwm2b AT90PWM2B
|
||||
pwm3 AT90PWM3
|
||||
pwm3b AT90PWM3B
|
||||
t12 ATtiny12
|
||||
t13 ATtiny13
|
||||
t15 ATtiny15
|
||||
t2313 ATtiny2313
|
||||
t25 ATtiny25
|
||||
t26 ATtiny26
|
||||
t261 ATtiny261
|
||||
t44 ATtiny44
|
||||
t45 ATtiny45
|
||||
t461 ATtiny461
|
||||
t84 ATtiny84
|
||||
t85 ATtiny85
|
||||
t861 ATtiny861
|
||||
t88 ATtiny88
|
||||
ucr2 AT32uca0512
|
||||
usb1286 ATmega1286
|
||||
usb1287 ATmega1287
|
||||
usb162 ATmega162
|
||||
usb646 ATmega647
|
||||
usb647 ATmega647
|
||||
usb82 ATmega82
|
||||
x128a1 ATxmega128A1
|
||||
x128a1d ATxmega128A1revD
|
||||
x128a3 ATxmega128A3
|
||||
x128a4 ATxmega128A4
|
||||
x16a4 ATxmega16A4
|
||||
x192a1 ATxmega192A1
|
||||
x192a3 ATxmega192A3
|
||||
x256a1 ATxmega256A1
|
||||
x256a3 ATxmega256A3
|
||||
x256a3b ATxmega256A3B
|
||||
x32a4 ATxmega32A4
|
||||
x64a1 ATxmega64A1
|
||||
x64a3 ATxmega64A3
|
||||
x64a4 ATxmega64A4
|
||||
.TE
|
||||
.Bl -tag -width "(**) "
|
||||
.It "(*)"
|
||||
|
|
@ -540,6 +583,21 @@ The low fuse byte.
|
|||
The lock byte.
|
||||
.It signature
|
||||
The three device signature bytes (device ID).
|
||||
.It fuse Ns Em N
|
||||
The fuse bytes of ATxmega devices,
|
||||
.Em N
|
||||
is an integer number
|
||||
for each fuse supported by the device.
|
||||
.It application
|
||||
The application flash area of ATxmega devices.
|
||||
.It apptable
|
||||
The application table flash area of ATxmega devices.
|
||||
.It boot
|
||||
The boot flash area of ATxmega devices.
|
||||
.It prodsig
|
||||
The production signature (calibration) area of ATxmega devices.
|
||||
.It usersig
|
||||
The user signature area of ATxmega devices.
|
||||
.El
|
||||
.Pp
|
||||
The
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ For avrdude version @value{VERSION}, @value{UPDATED}.
|
|||
|
||||
Copyright @copyright{} 2003, 2005 Brian Dean
|
||||
|
||||
Copyright @copyright{} 2006 - 2009 J@"org Wunsch
|
||||
Copyright @copyright{} 2006 - 2010 J@"org Wunsch
|
||||
|
||||
Permission is granted to make and distribute verbatim copies of
|
||||
this manual provided the copyright notice and this permission notice
|
||||
|
|
@ -187,11 +187,11 @@ protocol is more sophisticated.
|
|||
(The JTAG ICE mkII protocol can also be run on top of USB.)
|
||||
Only the memory programming functionality of the JTAG ICE is supported
|
||||
by AVRDUDE.
|
||||
For the JTAG ICE mkII, JTAG, debugWire and ISP mode are supported.
|
||||
For the JTAG ICE mkII, JTAG, debugWire and ISP mode are supported, provided
|
||||
it has a firmware revision of at least 4.14 (decimal).
|
||||
See below for the limitations of debugWire.
|
||||
|
||||
The Arduino (which is very similar to the STK500 1.x) is supported via
|
||||
its own programmer type specification ``arduino''.
|
||||
For ATxmega devices, the JTAG ICE mkII is supported in PDI mode, provided it
|
||||
has a revision 1 hardware and firmware version of at least 5.37 (decimal).
|
||||
|
||||
The AVR Dragon is supported in all modes (ISP, JTAG, HVSP, PP, debugWire).
|
||||
When used in JTAG and debugWire mode, the AVR Dragon behaves similar to a
|
||||
|
|
@ -203,6 +203,17 @@ comments will apply there.
|
|||
In particular, the Dragon starts out with a rather fast ISP clock
|
||||
frequency, so the @code{-B @var{bitclock}}
|
||||
option might be required to achieve a stable ISP communication.
|
||||
For ATxmega devices, the AVR Dragon is supported in PDI mode, provided it
|
||||
has a firmware version of at least 6.11 (decimal).
|
||||
|
||||
The Arduino (which is very similar to the STK500 1.x) is supported via
|
||||
its own programmer type specification ``arduino''.
|
||||
|
||||
The BusPirate is a versatile tool that can also be used as an AVR programmer.
|
||||
A single BusPirate can be connected to up to 3 independent AVRs. See
|
||||
the section on
|
||||
@emph{extended parameters}
|
||||
below for details.
|
||||
|
||||
The USBasp ISP and USBtinyISP adapters are also supported, provided AVRDUDE
|
||||
has been compiled with libusb support.
|
||||
|
|
@ -284,9 +295,6 @@ datasheet so that you can enter the programming specifications.
|
|||
Currently, the following MCU types are understood:
|
||||
|
||||
@multitable @columnfractions .15 .3
|
||||
@item @code{c128} @tab AT90CAN128
|
||||
@item @code{pwm2} @tab AT90PWM2
|
||||
@item @code{pwm3} @tab AT90PWM3
|
||||
@item @code{1200} @tab AT90S1200
|
||||
@item @code{2313} @tab AT90S2313
|
||||
@item @code{2333} @tab AT90S2333
|
||||
|
|
@ -296,6 +304,9 @@ Currently, the following MCU types are understood:
|
|||
@item @code{4434} @tab AT90S4434
|
||||
@item @code{8515} @tab AT90S8515
|
||||
@item @code{8535} @tab AT90S8535
|
||||
@item @code{c128} @tab AT90CAN128
|
||||
@item @code{c32} @tab AT90CAN32
|
||||
@item @code{c64} @tab AT90CAN64
|
||||
@item @code{m103} @tab ATmega103
|
||||
@item @code{m128} @tab ATmega128
|
||||
@item @code{m1280} @tab ATmega1280
|
||||
|
|
@ -307,33 +318,72 @@ Currently, the following MCU types are understood:
|
|||
@item @code{m162} @tab ATmega162
|
||||
@item @code{m163} @tab ATmega163
|
||||
@item @code{m164} @tab ATmega164
|
||||
@item @code{m164p} @tab ATmega164P
|
||||
@item @code{m168} @tab ATmega168
|
||||
@item @code{m169} @tab ATmega169
|
||||
@item @code{m2560} @tab ATmega2560 (**)
|
||||
@item @code{m2561} @tab ATmega2561 (**)
|
||||
@item @code{m32} @tab ATmega32
|
||||
@item @code{m324} @tab ATmega324
|
||||
@item @code{m324p} @tab ATmega324P
|
||||
@item @code{m325} @tab ATmega325
|
||||
@item @code{m3250} @tab ATmega3250
|
||||
@item @code{m328p} @tab ATmega328P
|
||||
@item @code{m329} @tab ATmega329
|
||||
@item @code{m3290} @tab ATmega3290
|
||||
@item @code{m329p} @tab ATmega329P
|
||||
@item @code{m3290p} @tab ATmega3290P
|
||||
@item @code{m48} @tab ATmega48
|
||||
@item @code{m64} @tab ATmega64
|
||||
@item @code{m640} @tab ATmega640
|
||||
@item @code{m644p} @tab ATmega644P
|
||||
@item @code{m644} @tab ATmega644
|
||||
@item @code{m645} @tab ATmega645
|
||||
@item @code{m6450} @tab ATmega6450
|
||||
@item @code{m649} @tab ATmega649
|
||||
@item @code{m6490} @tab ATmega6490
|
||||
@item @code{m8} @tab ATmega8
|
||||
@item @code{m8515} @tab ATmega8515
|
||||
@item @code{m8535} @tab ATmega8535
|
||||
@item @code{m88} @tab ATmega88
|
||||
@item @code{pwm2} @tab AT90PWM2
|
||||
@item @code{pwm2b} @tab AT90PWM2B
|
||||
@item @code{pwm3} @tab AT90PWM3
|
||||
@item @code{pwm3b} @tab AT90PWM3B
|
||||
@item @code{t12} @tab ATtiny12
|
||||
@item @code{t13} @tab ATtiny13
|
||||
@item @code{t15} @tab ATtiny15
|
||||
@item @code{t2313} @tab ATtiny2313
|
||||
@item @code{t25} @tab ATtiny25
|
||||
@item @code{t26} @tab ATtiny26
|
||||
@item @code{t261} @tab ATtiny261
|
||||
@item @code{t44} @tab ATtiny44
|
||||
@item @code{t45} @tab ATtiny45
|
||||
@item @code{t461} @tab ATtiny461
|
||||
@item @code{t84} @tab ATtiny84
|
||||
@item @code{t85} @tab ATtiny85
|
||||
@item @code{t861} @tab ATtiny861
|
||||
@item @code{t88} @tab ATtiny88
|
||||
@item @code{ucr2} @tab AT32uca0512
|
||||
@item @code{usb1286} @tab ATmega1286
|
||||
@item @code{usb1287} @tab ATmega1287
|
||||
@item @code{usb162} @tab ATmega162
|
||||
@item @code{usb646} @tab ATmega647
|
||||
@item @code{usb647} @tab ATmega647
|
||||
@item @code{usb82} @tab ATmega82
|
||||
@item @code{x128a1} @tab ATxmega128A1
|
||||
@item @code{x128a1d} @tab ATxmega128A1revD
|
||||
@item @code{x128a3} @tab ATxmega128A3
|
||||
@item @code{x128a4} @tab ATxmega128A4
|
||||
@item @code{x16a4} @tab ATxmega16A4
|
||||
@item @code{x192a1} @tab ATxmega192A1
|
||||
@item @code{x192a3} @tab ATxmega192A3
|
||||
@item @code{x256a1} @tab ATxmega256A1
|
||||
@item @code{x256a3} @tab ATxmega256A3
|
||||
@item @code{x256a3b} @tab ATxmega256A3B
|
||||
@item @code{x32a4} @tab ATxmega32A4
|
||||
@item @code{x64a1} @tab ATxmega64A1
|
||||
@item @code{x64a3} @tab ATxmega64A3
|
||||
@item @code{x64a4} @tab ATxmega64A4
|
||||
@end multitable
|
||||
|
||||
(*) The AT90S2323 and ATtiny22 use the same algorithm.
|
||||
|
|
@ -401,6 +451,8 @@ Altera ByteBlaster
|
|||
@item @code{bsd} @tab
|
||||
Brian Dean's Programmer,@*
|
||||
@url{http://www.bsdhome.com/avrdude/}
|
||||
@item @code{buspirate} @tab
|
||||
The Bus Pirate
|
||||
@item @code{butterfly} @tab
|
||||
Atmel Butterfly Development Board
|
||||
@item @code{c2n232i} @tab
|
||||
|
|
@ -420,6 +472,8 @@ AVR Dragon in high-voltage serial programming mode
|
|||
AVR Dragon in ISP mode
|
||||
@item @code{dragon_jtag} @tab
|
||||
AVR Dragon in JTAG mode
|
||||
@item @code{dragon_pdi} @tab
|
||||
AVR Dragon in PDI mode
|
||||
@item @code{dragon_pp} @tab
|
||||
AVR Dragon in (high-voltage) parallel programming mode
|
||||
@item @code{dt006} @tab
|
||||
|
|
@ -436,20 +490,26 @@ Futurlec.com programming cable
|
|||
Atmel JTAG ICE mkI, running at 115200 Bd
|
||||
@item @code{jtag1slow} @tab
|
||||
Atmel JTAG ICE mkI, running at 19200 Bd
|
||||
@item @code{jtag2slow} @tab
|
||||
Atmel JTAG ICE mkII (default speed 19200 Bd)
|
||||
@item @code{jtag2} @tab
|
||||
Atmel JTAG ICE mkII, running at 115200 Bd
|
||||
@item @code{jtag2avr32} @tab
|
||||
Atmel JTAG ICE mkII in AVR32 mode.
|
||||
@item @code{jtag2dw} @tab
|
||||
Atmel JTAG ICE mkII in debugWire mode.
|
||||
@item @code{jtag2fast} @tab
|
||||
Atmel JTAG ICE mkII, running at 115200 Bd
|
||||
@item @code{jtag2isp} @tab
|
||||
Atmel JTAG ICE mkII in ISP mode.
|
||||
@item @code{jtag2dw} @tab
|
||||
Atmel JTAG ICE mkII in debugWire mode.
|
||||
@item @code{jtag2pdi} @tab
|
||||
Atmel JTAG ICE mkII in PDI mode.
|
||||
@item @code{jtag2slow} @tab
|
||||
Atmel JTAG ICE mkII (default speed 19200 Bd)
|
||||
@item @code{jtagmkI} @tab
|
||||
Atmel JTAG ICE mkI, running at 115200 Bd
|
||||
@item @code{jtagmkII} @tab
|
||||
Atmel JTAG ICE mkII (default speed 19200 Bd)
|
||||
@item @code{jtagmkII_avr32} @tab
|
||||
Atmel JTAG ICE mkII in AVR32 mode.
|
||||
@item @code{mib510} @tab
|
||||
Crossbow MIB510 programming board
|
||||
@item @code{pavr} @tab
|
||||
|
|
@ -703,6 +763,19 @@ The low fuse byte.
|
|||
The lock byte.
|
||||
@item signature
|
||||
The three device signature bytes (device ID).
|
||||
@item fuse@emph{N}
|
||||
The fuse bytes of ATxmega devices, @emph{N} is an integer number
|
||||
for each fuse supported by the device.
|
||||
@item application
|
||||
The application flash area of ATxmega devices.
|
||||
@item apptable
|
||||
The application table flash area of ATxmega devices.
|
||||
@item boot
|
||||
The boot flash area of ATxmega devices.
|
||||
@item prodsig
|
||||
The production signature (calibration) area of ATxmega devices.
|
||||
@item usersig
|
||||
The user signature area of ATxmega devices.
|
||||
@end table
|
||||
|
||||
The @var{op} field specifies what operation to perform:
|
||||
|
|
@ -856,6 +929,60 @@ Use
|
|||
programmer creates errors during initial sequence.
|
||||
@end table
|
||||
|
||||
@item BusPirate
|
||||
|
||||
The BusPirate programmer type accepts the following extended parameters:
|
||||
@table @code
|
||||
@item @samp{reset=cs,aux,aux2}
|
||||
The default setup assumes the BusPirate's CS output pin connected to
|
||||
the RESET pin on AVR side. It is however possible to have multiple AVRs
|
||||
connected to the same BP with MISO, MOSI and SCK lines common for all of them.
|
||||
In such a case one AVR should have its RESET connected to BusPirate's
|
||||
@emph{CS}
|
||||
pin, second AVR's RESET connected to BusPirate's
|
||||
@emph{AUX}
|
||||
pin and if your BusPirate has an
|
||||
@emph{AUX2}
|
||||
pin (only available on BusPirate version v1a with firmware 3.0 or newer)
|
||||
use that to activate RESET on the third AVR.
|
||||
|
||||
It may be a good idea to decouple the BusPirate and the AVR's SPI buses from
|
||||
each other using a 3-state bus buffer. For example 74HC125 or 74HC244 are some
|
||||
good candidates with the latches driven by the appropriate reset pin (cs,
|
||||
aux or aux2). Otherwise the SPI traffic in one active circuit may interfere
|
||||
with programming the AVR in the other design.
|
||||
|
||||
@item @samp{speed=@var{0..7}}
|
||||
@table @code
|
||||
@item 0
|
||||
30 kHz (default)
|
||||
@item 1
|
||||
125 kHz
|
||||
@item 2
|
||||
250 kHz
|
||||
@item 3
|
||||
1 MHz
|
||||
@item 4
|
||||
2 MHz
|
||||
@item 5
|
||||
2.6 MHz
|
||||
@item 6
|
||||
4 MHz
|
||||
@item 7
|
||||
8 MHz
|
||||
@end table
|
||||
|
||||
@item @samp{ascii}
|
||||
Use ASCII mode even when the firmware supports BinMode (binary mode).
|
||||
BinMode is supported in firmware 2.7 and newer, older FW's either don't
|
||||
have BinMode or their BinMode is buggy. ASCII mode is slower and makes
|
||||
the above
|
||||
@samp{reset=}
|
||||
and
|
||||
@samp{speed=}
|
||||
parameters unavailable.
|
||||
@end table
|
||||
|
||||
@end table
|
||||
|
||||
@page
|
||||
|
|
@ -1524,32 +1651,61 @@ The following devices are supported by the respective STK600 routing
|
|||
and socket card:
|
||||
|
||||
@multitable @columnfractions .25 .25 .5
|
||||
@headitem Routing card @tab Socket card @tab Devices
|
||||
@item @code{STK600-RC008T-2} @tab @code{STK600-DIP} @tab ATtiny11 ATtiny12 ATtiny13 ATtiny25 ATtiny45 ATtiny85
|
||||
Routing card @tab Socket card @tab Devices
|
||||
@item @code{} @tab @code{STK600-ATTINY10} @tab ATtiny4 ATtiny5 ATtiny9 ATtiny10
|
||||
@item @code{STK600-RC008T-2} @tab @code{STK600-DIP} @tab ATtiny11 ATtiny12 ATtiny13 ATtiny13A ATtiny25 ATtiny45 ATtiny85
|
||||
@item @code{STK600-RC008T-7} @tab @code{STK600-DIP} @tab ATtiny15
|
||||
@item @code{STK600-RC020T-1} @tab @code{STK600-DIP} @tab ATtiny2313
|
||||
@item @code{STK600-RC014T-42} @tab @code{STK600-SOIC} @tab ATtiny20
|
||||
@item @code{STK600-RC020T-1} @tab @code{STK600-DIP} @tab ATtiny2313 ATtiny2313A ATtiny4313
|
||||
@item @code{} @tab @code{STK600-TinyX3U} @tab ATtiny43U
|
||||
@item @code{STK600-RC014T-12} @tab @code{STK600-DIP} @tab ATtiny24 ATtiny44 ATtiny84
|
||||
@item @code{STK600-RC020T-8} @tab @code{STK600-DIP} @tab ATtiny26 ATtiny261 ATtiny461 ATtiny861
|
||||
@item @code{STK600-RC020T-23} @tab @code{STK600-SOIC} @tab ATtiny167
|
||||
@item @code{STK600-RC014T-12} @tab @code{STK600-DIP} @tab ATtiny24 ATtiny44 ATtiny84 ATtiny24A ATtiny44A
|
||||
@item @code{STK600-RC020T-8} @tab @code{STK600-DIP} @tab ATtiny26 ATtiny261 ATtiny261A ATtiny461 ATtiny861 ATtiny861A
|
||||
@item @code{STK600-RC020T-43} @tab @code{STK600-SOIC} @tab ATtiny261 ATtiny261A ATtiny461 ATtiny461A ATtiny861 ATtiny861A
|
||||
@item @code{STK600-RC020T-23} @tab @code{STK600-SOIC} @tab ATtiny87 ATtiny167
|
||||
@item @code{STK600-RC028T-3} @tab @code{STK600-DIP} @tab ATtiny28
|
||||
@item @code{STK600-RC028M-6} @tab @code{STK600-DIP} @tab ATtiny48 ATtiny88 ATmega8 ATmega48 ATmega88 ATmega168 ATmega48P ATmega88P ATmega168P ATmega328P
|
||||
@item @code{STK600-RC028M-6} @tab @code{STK600-DIP} @tab ATtiny48 ATtiny88 ATmega8 ATmega8A ATmega48 ATmega88 ATmega168 ATmega48P ATmega48PA ATmega88P ATmega88PA ATmega168P ATmega168PA ATmega328P
|
||||
@item @code{} @tab @code{QT600-ATTINY88-QT8} @tab ATtiny88
|
||||
@item @code{STK600-RC040M-4} @tab @code{STK600-DIP} @tab ATmega8515 ATmega162
|
||||
@item @code{STK600-RC040M-5} @tab @code{STK600-DIP} @tab ATmega8535 ATmega16 ATmega32 ATmega164P ATmega324P ATmega644 ATmega644P ATmega1284P
|
||||
@item @code{STK600-RC064M-9} @tab @code{STK600-TQFP64} @tab ATmega64 ATmega128 ATmega1281 ATmega2561 AT90CAN32 AT90CAN64 AT90CAN128
|
||||
@item @code{STK600-RC064M-10} @tab @code{STK600-TQFP64} @tab ATmega165 ATmega165P ATmega169 ATmega169P ATmega325 ATmega325P ATmega329 ATmega329P ATmega645 ATmega649
|
||||
@item @code{STK600-RC044M-30} @tab @code{STK600-TQFP44} @tab ATmega8515 ATmega162
|
||||
@item @code{STK600-RC040M-5} @tab @code{STK600-DIP} @tab ATmega8535 ATmega16 ATmega16A ATmega32 ATmega32A ATmega164P ATmega164PA ATmega324P ATmega324PA ATmega644 ATmega644P ATmega644PA ATmega1284P
|
||||
@item @code{STK600-RC044M-31} @tab @code{STK600-TQFP44} @tab ATmega8535 ATmega16 ATmega16A ATmega32 ATmega32A ATmega164P ATmega164PA ATmega324P ATmega324PA ATmega644 ATmega644P ATmega644PA ATmega1284P
|
||||
@item @code{} @tab @code{QT600-ATMEGA324-QM64} @tab ATmega324PA
|
||||
@item @code{STK600-RC032M-29} @tab @code{STK600-TQFP32} @tab ATmega8 ATmega8A ATmega48 ATmega88 ATmega168 ATmega48P ATmega48PA ATmega88P ATmega88PA ATmega168P ATmega168PA ATmega328P
|
||||
@item @code{STK600-RC064M-9} @tab @code{STK600-TQFP64} @tab ATmega64 ATmega64A ATmega128 ATmega128A ATmega1281 ATmega2561 AT90CAN32 AT90CAN64 AT90CAN128
|
||||
@item @code{STK600-RC064M-10} @tab @code{STK600-TQFP64} @tab ATmega165 ATmega165P ATmega169 ATmega169P ATmega169PA ATmega325 ATmega325P ATmega329 ATmega329P ATmega645 ATmega649 ATmega649P
|
||||
@item @code{STK600-RC100M-11} @tab @code{STK600-TQFP100} @tab ATmega640 ATmega1280 ATmega2560
|
||||
@item @code{} @tab @code{STK600-ATMEGA2560} @tab ATmega2560
|
||||
@item @code{STK600-RC100M-18} @tab @code{STK600-TQFP100} @tab ATmega3250 ATmega3250P ATmega3290 ATmega3290P ATmega6450 ATmega6490
|
||||
@item @code{STK600-RC32U-20} @tab @code{STK600-TQFP32} @tab AT90USB82 AT90USB162
|
||||
@item @code{STK600-RC044U-25} @tab @code{STK600-TQFP44} @tab ATmega32U4
|
||||
@item @code{STK600-RC064U-17} @tab @code{STK600-TQFP64} @tab AT90USB646 AT90USB1286 AT90USB647 AT90USB1287
|
||||
@item @code{STK600-RCPWM-22} @tab @code{STK600-TQFP32} @tab ATmega32C1 ATmega32M1
|
||||
@item @code{STK600-RC032U-20} @tab @code{STK600-TQFP32} @tab AT90USB82 AT90USB162 ATmega8U2 ATmega16U2 ATmega32U2
|
||||
@item @code{STK600-RC044U-25} @tab @code{STK600-TQFP44} @tab ATmega16U4 ATmega32U4
|
||||
@item @code{STK600-RC064U-17} @tab @code{STK600-TQFP64} @tab ATmega32U6 AT90USB646 AT90USB1286 AT90USB647 AT90USB1287
|
||||
@item @code{STK600-RCPWM-22} @tab @code{STK600-TQFP32} @tab ATmega32C1 ATmega64C1 ATmega16M1 ATmega32M1 ATmega64M1
|
||||
@item @code{STK600-RCPWM-19} @tab @code{STK600-SOIC} @tab AT90PWM2 AT90PWM3 AT90PWM2B AT90PWM3B AT90PWM216 AT90PWM316
|
||||
@item @code{STK600-RC044M-24} @tab @code{STK600-TSSOP44} @tab ATmega32HVB
|
||||
@item @code{STK600-RC100X-13} @tab @code{STK600-TQFP100} @tab ATxmega128A1 ATxmega128A1_revD ATxmega64A1
|
||||
@item @code{STK600-RCPWM-26} @tab @code{STK600-SOIC} @tab AT90PWM81
|
||||
@item @code{STK600-RC044M-24} @tab @code{STK600-TSSOP44} @tab ATmega16HVB ATmega32HVB
|
||||
@item @code{} @tab @code{STK600-HVE2} @tab ATmega64HVE
|
||||
@item @code{} @tab @code{STK600-ATMEGA128RFA1} @tab ATmega128RFA1
|
||||
@item @code{STK600-RC100X-13} @tab @code{STK600-TQFP100} @tab ATxmega64A1 ATxmega128A1 ATxmega128A1_revD ATxmega128A1U
|
||||
@item @code{} @tab @code{STK600-ATXMEGA1281A1} @tab ATxmega128A1
|
||||
@item @code{} @tab @code{QT600-ATXMEGA128A1-QT16} @tab ATxmega128A1
|
||||
@item @code{STK600-RC064X-14} @tab @code{STK600-TQFP64} @tab ATxmega64A3 ATxmega128A3 ATxmega256A3 ATxmega64D3 ATxmega128D3 ATxmega192D3 ATxmega256D3
|
||||
@item @code{STK600-RC064X-14} @tab @code{STK600-MLF64} @tab ATxmega256A3B
|
||||
@item @code{STK600-RC044X-15} @tab @code{STK600-TQFP44} @tab ATxmega32A4 ATxmega16A4 ATxmega16D4 ATxmega32D4
|
||||
@item @code{} @tab @code{STK600-ATXMEGAT0} @tab ATxmega32T0
|
||||
@item @code{} @tab @code{STK600-uC3-144} @tab AT32UC3A0512 AT32UC3A0256 AT32UC3A0128
|
||||
@item @code{STK600-RCuC3B0-21} @tab @code{STK600-TQFP64-2} @tab AT32UC3B0256 AT32UC3B0128 AT32UC3B064
|
||||
@item @code{STK600-RCUC3A144-33} @tab @code{STK600-TQFP144} @tab AT32UC3A0512 AT32UC3A0256 AT32UC3A0128
|
||||
@item @code{STK600-RCuC3A100-28} @tab @code{STK600-TQFP100} @tab AT32UC3A1512 AT32UC3A1256 AT32UC3A1128
|
||||
@item @code{STK600-RCuC3B0-21} @tab @code{STK600-TQFP64-2} @tab AT32UC3B0256 AT32UC3B0512RevC AT32UC3B0512 AT32UC3B0128 AT32UC3B064 AT32UC3D1128
|
||||
@item @code{STK600-RCuC3B48-27} @tab @code{STK600-TQFP48} @tab AT32UC3B1256 AT32UC3B164
|
||||
@item @code{STK600-RCUC3A144-32} @tab @code{STK600-TQFP144} @tab AT32UC3A3512 AT32UC3A3256 AT32UC3A3128 AT32UC3A364 AT32UC3A3256S AT32UC3A3128S AT32UC3A364S
|
||||
@item @code{STK600-RCUC3C0-36} @tab @code{STK600-TQFP144} @tab AT32UC3C0512 AT32UC3C0256 AT32UC3C0128 AT32UC3C064
|
||||
@item @code{STK600-RCUC3C1-38} @tab @code{STK600-TQFP100} @tab AT32UC3C1512 AT32UC3C1256 AT32UC3C1128 AT32UC3C164
|
||||
@item @code{STK600-RCUC3C2-40} @tab @code{STK600-TQFP64-2} @tab AT32UC3C2512 AT32UC3C2256 AT32UC3C2128 AT32UC3C264
|
||||
@item @code{STK600-RCUC3C0-37} @tab @code{STK600-TQFP144} @tab AT32UC3C0512 AT32UC3C0256 AT32UC3C0128 AT32UC3C064
|
||||
@item @code{STK600-RCUC3C1-39} @tab @code{STK600-TQFP100} @tab AT32UC3C1512 AT32UC3C1256 AT32UC3C1128 AT32UC3C164
|
||||
@item @code{STK600-RCUC3C2-41} @tab @code{STK600-TQFP64-2} @tab AT32UC3C2512 AT32UC3C2256 AT32UC3C2128 AT32UC3C264
|
||||
@item @code{STK600-RCUC3L0-34} @tab @code{STK600-TQFP48} @tab AT32UC3L064 AT32UC3L032 AT32UC3L016
|
||||
@item @code{} @tab @code{QT600-AT32UC3L-QM64} @tab AT32UC3L064
|
||||
@end multitable
|
||||
|
||||
Ensure the correct socket and routing card are mounted @emph{before}
|
||||
|
|
|
|||
|
|
@ -678,10 +678,21 @@ int jtagmkII_getsync(PROGRAMMER * pgm, int mode) {
|
|||
unsigned char buf[3], *resp, c = 0xff;
|
||||
int status;
|
||||
unsigned int fwver, hwver;
|
||||
int is_dragon;
|
||||
|
||||
if (verbose >= 3)
|
||||
fprintf(stderr, "%s: jtagmkII_getsync()\n", progname);
|
||||
|
||||
if (strncmp(pgm->type, "JTAG", strlen("JTAG")) == 0) {
|
||||
is_dragon = 0;
|
||||
} else if (strncmp(pgm->type, "DRAGON", strlen("DRAGON")) == 0) {
|
||||
is_dragon = 1;
|
||||
} else {
|
||||
fprintf(stderr,
|
||||
"%s: Programmer is neither JTAG ICE mkII nor AVR Dragon\n",
|
||||
progname);
|
||||
return -1;
|
||||
}
|
||||
for (tries = 0; tries < MAXTRIES; tries++) {
|
||||
|
||||
/* Get the sign-on information. */
|
||||
|
|
@ -756,28 +767,24 @@ int jtagmkII_getsync(PROGRAMMER * pgm, int mode) {
|
|||
* There's no official documentation from Atmel about what firmware
|
||||
* revision matches what device descriptor length. The algorithm
|
||||
* below has been found empirically.
|
||||
*
|
||||
* The original JTAG ICE mkII has hardware version 0, the AVR Dragon
|
||||
* has hardware version 2 (on the slave MCU) and doesn't need the
|
||||
* firmware version checks (by now).
|
||||
*/
|
||||
#define FWVER(maj, min) ((maj << 8) | (min))
|
||||
if (hwver == 0 && fwver < FWVER(3, 16)) {
|
||||
if (!is_dragon && fwver < FWVER(3, 16)) {
|
||||
PDATA(pgm)->device_descriptor_length -= 2;
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): "
|
||||
"S_MCU firmware version might be too old to work correctly\n",
|
||||
progname);
|
||||
} else if (hwver == 0 && fwver < FWVER(4, 0)) {
|
||||
} else if (!is_dragon && fwver < FWVER(4, 0)) {
|
||||
PDATA(pgm)->device_descriptor_length -= 2;
|
||||
}
|
||||
if (verbose >= 2 && mode != EMULATOR_MODE_SPI)
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): Using a %zu-byte device descriptor\n",
|
||||
progname, PDATA(pgm)->device_descriptor_length);
|
||||
if (mode == EMULATOR_MODE_SPI || mode == EMULATOR_MODE_HV) {
|
||||
"%s: jtagmkII_getsync(): Using a %u-byte device descriptor\n",
|
||||
progname, (unsigned)PDATA(pgm)->device_descriptor_length);
|
||||
if (mode == EMULATOR_MODE_SPI) {
|
||||
PDATA(pgm)->device_descriptor_length = 0;
|
||||
if (hwver == 0 && fwver < FWVER(4, 14)) {
|
||||
if (!is_dragon && fwver < FWVER(4, 14)) {
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): ISP functionality requires firmware "
|
||||
"version >= 4.14\n",
|
||||
|
|
@ -785,6 +792,29 @@ int jtagmkII_getsync(PROGRAMMER * pgm, int mode) {
|
|||
return -1;
|
||||
}
|
||||
}
|
||||
if (mode == EMULATOR_MODE_PDI || mode == EMULATOR_MODE_JTAG_XMEGA) {
|
||||
if (!is_dragon && mode == EMULATOR_MODE_PDI && hwver < 1) {
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): Xmega PDI support requires hardware "
|
||||
"revision >= 1\n",
|
||||
progname);
|
||||
return -1;
|
||||
}
|
||||
if (!is_dragon && fwver < FWVER(5, 37)) {
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): Xmega support requires firmware "
|
||||
"version >= 5.37\n",
|
||||
progname);
|
||||
return -1;
|
||||
}
|
||||
if (is_dragon && fwver < FWVER(6, 11)) {
|
||||
fprintf(stderr,
|
||||
"%s: jtagmkII_getsync(): Xmega support requires firmware "
|
||||
"version >= 6.11\n",
|
||||
progname);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
#undef FWVER
|
||||
|
||||
if(mode < 0) return 0; // for AVR32
|
||||
|
|
@ -1241,8 +1271,10 @@ static int jtagmkII_initialize(PROGRAMMER * pgm, AVRPART * p)
|
|||
* mode from JTAG to JTAG_XMEGA.
|
||||
*/
|
||||
if ((pgm->flag & PGM_FL_IS_JTAG) &&
|
||||
(p->flags & AVRPART_HAS_PDI))
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG_XMEGA);
|
||||
(p->flags & AVRPART_HAS_PDI)) {
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG_XMEGA) < 0)
|
||||
return -1;
|
||||
}
|
||||
|
||||
free(PDATA(pgm)->flash_pagecache);
|
||||
free(PDATA(pgm)->eeprom_pagecache);
|
||||
|
|
@ -1380,7 +1412,8 @@ static int jtagmkII_open(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1424,7 +1457,8 @@ static int jtagmkII_open_dw(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_DEBUGWIRE);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_DEBUGWIRE) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1468,7 +1502,8 @@ static int jtagmkII_open_pdi(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_PDI);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_PDI) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1513,7 +1548,8 @@ static int jtagmkII_dragon_open(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1558,7 +1594,8 @@ static int jtagmkII_dragon_open_dw(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_DEBUGWIRE);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_DEBUGWIRE) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1603,7 +1640,8 @@ static int jtagmkII_dragon_open_pdi(PROGRAMMER * pgm, char * port)
|
|||
*/
|
||||
jtagmkII_drain(pgm, 0);
|
||||
|
||||
jtagmkII_getsync(pgm, EMULATOR_MODE_PDI);
|
||||
if (jtagmkII_getsync(pgm, EMULATOR_MODE_PDI) < 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -2341,8 +2379,8 @@ static int jtagmkII_setparm(PROGRAMMER * pgm, unsigned char parm,
|
|||
memcpy(buf + 2, value, size);
|
||||
if (verbose >= 2)
|
||||
fprintf(stderr, "%s: jtagmkII_setparm(): "
|
||||
"Sending set parameter command (parm 0x%02x, %zu bytes): ",
|
||||
progname, parm, size);
|
||||
"Sending set parameter command (parm 0x%02x, %u bytes): ",
|
||||
progname, parm, (unsigned)size);
|
||||
jtagmkII_send(pgm, buf, size + 2);
|
||||
|
||||
status = jtagmkII_recv(pgm, &resp);
|
||||
|
|
|
|||
Loading…
Reference in New Issue