Fix error reporting by avr_write_byte().

Fix setting of status LEDs under various write-fail conditions.

Add a flag to indicate that a memory type requires the device to
possibly be powered off and back on after a write to it.  This is due
to a hardware problem on some Atmel devices, see:

	http://www.atmel.com/atmel/acrobat/doc1280.pdf

Add greater verbosity to the part-display code when verbose>1 to
display avrprog's encoding of the defined programming instructions.
This is primarily for debugging purposes.


Part updates:

  * add the AT90S4414 part

  * add fuse and lock bit access instructions for the AT90S1200,
    AT90S4434, and AT90S8515.

  * add the pwroff_after_write flag to the fuse bits for the AT90S2333
    and AT90S4433 parts


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@123 81a1dc3b-b13d-400b-aceb-764788c761c2

avrdude/avr.c

@@ -442,8 +442,9 @@ int avr_read(int fd, AVRPART * p, char * memtype, int size, int verbose)
     }
     buf[i] = rbyte;
     if (verbose) {
-      if ((i % 16 == 0)||(i == (size-1)))
+      if ((i % 16 == 0)||(i == (size-1))) {
-        fprintf(stderr, "                    \r%4lu  0x%02x", i, rbyte);
+        fprintf(stderr, "\r        \r%6lu", i);
+      }
     }
   }
 
@@ -524,7 +525,7 @@ int avr_write_byte(int fd, AVRPART * p, AVRMEM * mem,
     rc = avr_read_byte(fd, p, mem, addr, &b);
     if (rc != 0) {
       if (rc != -1) {
-        return -1;
+        return -2;
       }
       /*
        * the read operation is not support on this memory type
@@ -603,11 +604,14 @@ int avr_write_byte(int fd, AVRPART * p, AVRMEM * mem,
   tries = 0;
   ready = 0;
   while (!ready) {
-    usleep(mem->min_write_delay); /* typical write delay */
+    usleep(mem->min_write_delay);
     rc = avr_read_byte(fd, p, mem, addr, &r);
     if (rc != 0) {
-      return -1;
+      LED_OFF(fd, pgm->pinno[PIN_LED_PGM]);
+      LED_ON(fd, pgm->pinno[PIN_LED_ERR]);
+      return -4;
     }
+
     if ((data == mem->readback[0]) ||
         (data == mem->readback[1])) {
       /* 
@@ -619,24 +623,62 @@ int avr_write_byte(int fd, AVRPART * p, AVRMEM * mem,
       usleep(mem->max_write_delay);
       rc = avr_read_byte(fd, p, mem, addr, &r);
       if (rc != 0) {
-        return -1;
+        LED_OFF(fd, pgm->pinno[PIN_LED_PGM]);
+        LED_ON(fd, pgm->pinno[PIN_LED_ERR]);
+        return -5;
       }
     }
     
     if (r == data) {
       ready = 1;
     }
-    
+    else if (mem->pwroff_after_write) {
+      /*
+       * The device has been flagged as power-off after write to this
+       * memory type.  The reason we don't just blindly follow the
+       * flag is that the power-off advice may only apply to some
+       * memory bits but not all.  We only actually power-off the
+       * device if the data read back does not match what we wrote.
+       */
+      usleep(mem->max_write_delay); /* maximum write delay */
+      LED_OFF(fd, pgm->pinno[PIN_LED_PGM]);
+      fprintf(stderr,
+              "%s: this device must be powered off and back on to continue\n",
+              progname);
+      if (pgm->pinno[PPI_AVR_VCC]) {
+        fprintf(stderr, "%s: attempting to do this now ...\n", progname);
+        avr_powerdown(fd);
+        usleep(250000);
+        rc = avr_initialize(fd, p);
+        if (rc < 0) {
+          fprintf(stderr, "%s: initialization failed, rc=%d\n", progname, rc);
+          fprintf(stderr, 
+                  "%s: can't re-initialize device after programming the "
+                  "%s bits\n", progname, mem->desc);
+          fprintf(stderr,
+                  "%s: you must manually power-down the device and restart\n"
+                  "%s:   avrprog to continue.\n",
+                  progname, progname);
+          return -3;
+        }
+        
+        fprintf(stderr, "%s: device was successfully re-initialized\n",
+                progname);
+        return 0;
+      }
+    }
+
     tries++;
     if (!ready && tries > 5) {
       /*
-       * we couldn't write the data, indicate our displeasure by
+       * we wrote the data, but after waiting for what should have
-       * returning an error code 
+       * been plenty of time, the memory cell still doesn't match what
+       * we wrote.  Indicate a write error.
        */
       LED_OFF(fd, pgm->pinno[PIN_LED_PGM]);
       LED_ON(fd, pgm->pinno[PIN_LED_ERR]);
       
-      return -1;
+      return -6;
     }
   }
 
@@ -689,8 +731,9 @@ int avr_write(int fd, AVRPART * p, char * memtype, int size, int verbose)
   for (i=0; i<wsize; i++) {
     data = m->buf[i];
     if (verbose) {
-      if ((i % 16 == 0)||(i == (wsize-1)))
+      if ((i % 16 == 0)||(i == (wsize-1))) {
-        fprintf(stderr, "                      \r%4lu 0x%02x ", i, data);
+        fprintf(stderr, "\r      \r%6lu", i);
+      }
     }
     rc = avr_write_byte(fd, p, m, i, data);
     if (rc) {
@@ -953,7 +996,7 @@ int avr_verify(AVRPART * p, AVRPART * v, char * memtype, int size)
   for (i=0; i<size; i++) {
     if (buf1[i] != buf2[i]) {
       fprintf(stderr, 
-              "%s: verification error, first mismatch at byte %d\n"
+              "%s: verification error, first mismatch at byte 0x%04x\n"
               "%s0x%02x != 0x%02x\n",
               progname, i, 
               progbuf, buf1[i], buf2[i]);
@@ -966,8 +1009,45 @@ int avr_verify(AVRPART * p, AVRPART * v, char * memtype, int size)
 
 
 
-void avr_mem_display(char * prefix, FILE * f, AVRMEM * m, int type)
+char * avr_op_str(int op)
 {
+  switch (op) {
+    case AVR_OP_READ        : return "READ"; break;
+    case AVR_OP_WRITE       : return "WRITE"; break;
+    case AVR_OP_READ_LO     : return "READ_LO"; break;
+    case AVR_OP_READ_HI     : return "READ_HI"; break;
+    case AVR_OP_WRITE_LO    : return "WRITE_LO"; break;
+    case AVR_OP_WRITE_HI    : return "WRITE_HI"; break;
+    case AVR_OP_LOADPAGE_LO : return "LOADPAGE_LO"; break;
+    case AVR_OP_LOADPAGE_HI : return "LOADPAGE_HI"; break;
+    case AVR_OP_WRITEPAGE   : return "WRITEPAGE"; break;
+    case AVR_OP_CHIP_ERASE  : return "CHIP_ERASE"; break;
+    case AVR_OP_PGM_ENABLE  : return "PGM_ENABLE"; break;
+    default : return "<unknown opcode>"; break;
+  }
+}
+
+
+char * bittype(int type)
+{
+  switch (type) {
+    case AVR_CMDBIT_IGNORE  : return "IGNORE"; break;
+    case AVR_CMDBIT_VALUE   : return "VALUE"; break;
+    case AVR_CMDBIT_ADDRESS : return "ADDRESS"; break;
+    case AVR_CMDBIT_INPUT   : return "INPUT"; break;
+    case AVR_CMDBIT_OUTPUT  : return "OUTPUT"; break;
+    default : return "<unknown bit type>"; break;
+  }
+}
+
+
+
+void avr_mem_display(char * prefix, FILE * f, AVRMEM * m, int type, 
+                     int verbose)
+{
+  int i, j;
+  char * optr;
+
   if (m == NULL) {
     fprintf(f, 
             "%s                          Page                       Polled\n"
@@ -976,6 +1056,13 @@ void avr_mem_display(char * prefix, FILE * f, AVRMEM * m, int type)
             prefix, prefix, prefix);
   }
   else {
+    if (verbose > 1) {
+      fprintf(f, 
+              "%s                          Page                       Polled\n"
+              "%sMemory Type Paged  Size   Size #Pages MinW  MaxW   ReadBack\n"
+              "%s----------- ------ ------ ---- ------ ----- ----- ---------\n",
+              prefix, prefix, prefix);
+    }
     fprintf(f,
             "%s%-11s %-6s %6d %4d %5d %5d %5d 0x%02x 0x%02x\n",
             prefix, m->desc,
@@ -987,12 +1074,35 @@ void avr_mem_display(char * prefix, FILE * f, AVRMEM * m, int type)
             m->max_write_delay,
             m->readback[0], 
             m->readback[1]);
+    if (verbose > 1) {
+      fprintf(stderr, 
+              "%s  Memory Ops:\n"
+              "%s    Oeration     Inst Bit  Bit Type  Bitno  Value\n"
+              "%s    -----------  --------  --------  -----  -----\n",
+              prefix, prefix, prefix);
+      for (i=0; i<AVR_OP_MAX; i++) {
+        if (m->op[i]) {
+          for (j=31; j>=0; j--) {
+            if (j==31)
+              optr = avr_op_str(i);
+            else
+              optr = " ";
+          fprintf(f,
+                  "%s    %-11s  %8d  %8s  %5d  %5d\n",
+                  prefix, optr, j,
+                  bittype(m->op[i]->bit[j].type),
+                  m->op[i]->bit[j].bitno,
+                  m->op[i]->bit[j].value);
+          }
+        }
+      }
+    }
   }
 }
 
 
 
-void avr_display(FILE * f, AVRPART * p, char * prefix)
+void avr_display(FILE * f, AVRPART * p, char * prefix, int verbose)
 {
   int i;
   char * buf;
@@ -1020,10 +1130,12 @@ void avr_display(FILE * f, AVRPART * p, char * prefix)
     px = buf;
   }
   
-  avr_mem_display(px, f, NULL, 0);
+  if (verbose <= 1) {
+    avr_mem_display(px, f, NULL, 0, verbose);
+  }
   for (ln=lfirst(p->mem); ln; ln=lnext(ln)) {
     m = ldata(ln);
-    avr_mem_display(px, f, m, i);
+    avr_mem_display(px, f, m, i, verbose);
   }
 
   if (buf)

avrdude/avr.h

@@ -87,6 +87,10 @@ typedef struct avrmem {
   int num_pages;              /* number of pages (if page addressed) */
   int min_write_delay;        /* microseconds */
   int max_write_delay;        /* microseconds */
+  int pwroff_after_write;     /* after this memory type is written to,
+                                 the device must be powered off and
+                                 back on, see errata
+                                 http://www.atmel.com/atmel/acrobat/doc1280.pdf */
   unsigned char readback[2];  /* polled read-back values */
   unsigned char * buf;        /* pointer to memory buffer */
   OPCODE * op[AVR_OP_MAX];    /* opcodes */
@@ -158,7 +162,9 @@ int avr_initmem(AVRPART * p);
 
 int avr_verify(AVRPART * p, AVRPART * v, char * memtype, int size);
 
-void avr_display(FILE * f, AVRPART * p, char * prefix);
+void avr_mem_display(char * prefix, FILE * f, AVRMEM * m, int type, 
+                     int verbose);
 
+void avr_display(FILE * f, AVRPART * p, char * prefix, int verbose);
 
 #endif

avrdude/avrdude.conf.sample

@@ -209,6 +209,82 @@ part
         read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x  x",
                           "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o  o";
       ;
+    memory "fuse"
+        size            = 1;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        read            = "0 1 0 1  0 0 0 0   x x x x  x x x x",
+                          "x x x x  x x x x   x x o o  o o o o";
+
+        write           = "1 0 1 0  1 1 0 0   1 0 1 i  i i i i",
+                          "x x x x  x x x x   x x x x  x x x x";
+      ;
+    memory "lock"
+        size            = 1;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        read            = "0 1 0 1  1 0 0 0   x x x x  x x x x",
+                          "x x x x  x x x x   x x x x  x o o x";
+
+        write           = "1 0 1 0  1 1 0 0   1 1 1 1  1 i i 1",
+                          "x x x x  x x x x   x x x x  x x x x";
+      ;
+  ;
+
+
+part
+    id               = "4414";
+    desc             = "AT90S4414";
+    chip_erase_delay = 20000;
+    pgm_enable       = "1 0 1 0  1 1 0 0    0 1 0 1  0 0 1 1",
+                       "x x x x  x x x x    x x x x  x x x x";
+
+    chip_erase       = "1 0 1 0  1 1 0 0    1 0 0 0  0 0 0 0",
+                       "x x x x  x x x x    x x x x  x x x x";
+
+    memory "eeprom"
+        size            = 256;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        readback_p1     = 0x80;
+        readback_p2     = 0x7f;
+        read            = " 1  0  1  0   0  0  0  0  x x x x  x x x a8", 
+                          "a7 a6 a5 a4 a3 a2 a1 a0   o o o o  o o o o";
+
+        write           = " 1  1  0  0   0  0  0  0   x x x x  x x x a8",
+                          "a7 a6 a5 a4  a3 a2 a1 a0   i i i i  i i i i";
+      ;
+    memory "flash"
+        size            = 4096;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        readback_p1     = 0x7f;
+        readback_p2     = 0x00;
+        read_lo         = "  0   0   1   0    0   0   0   0",
+                          "  x   x   x   x  a11 a10  a9  a8",
+                          " a7  a6  a5  a4   a3  a2  a1  a0",
+                          "  o   o   o   o    o   o   o   o";
+
+        read_hi         = "  0   0   1   0    1   0   0   0",
+                          "  x   x   x   x  a11 a10  a9  a8",
+                          " a7  a6  a5  a4   a3  a2  a1  a0",
+                          "  o   o   o   o    o   o   o   o";
+
+        write_lo        = "  0   1   0   0    0   0   0   0",
+                          "  x   x   x   x  a11 a10  a9  a8",
+                          " a7  a6  a5  a4   a3  a2  a1  a0",
+                          "  i   i   i   i    i   i   i   i";
+
+        write_hi        = "  0   1   0   0    1   0   0   0",
+                          "  x   x   x   x  a11 a10  a9  a8",
+                          " a7  a6  a5  a4   a3  a2  a1  a0",
+                          "  i   i   i   i    i   i   i   i";
+      ;
+    memory "signature"
+        size            = 3;
+        read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x  x",
+                          "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o  o";
+      ;
   ;
 
 
@@ -335,6 +411,8 @@ part
 
         write           = "1 0 1 0  1 1 0 0   1 0 1 i  i i i i",
                           "x x x x  x x x x   x x x x  x x x x";
+
+        pwroff_after_write = 1;
       ;
     memory "lock"
         size            = 1;
@@ -411,6 +489,8 @@ part
 
         write           = "1 0 1 0  1 1 0 0   1 0 1 i  i i i i",
                           "x x x x  x x x x   x x x x  x x x x";
+
+        pwroff_after_write = 1;
       ;
     memory "lock"
         size            = 1;
@@ -478,6 +558,26 @@ part
         read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x  x",
                           "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o  o";
       ;
+    memory "fuse"
+        size            = 1;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        read            = "0 1 0 1  0 0 0 0   x x x x  x x x x",
+                          "x x x x  x x x x   x x o o  o o o o";
+
+        write           = "1 0 1 0  1 1 0 0   1 0 1 i  i i i i",
+                          "x x x x  x x x x   x x x x  x x x x";
+      ;
+    memory "lock"
+        size            = 1;
+        min_write_delay = 9000;
+        max_write_delay = 20000;
+        read            = "0 1 0 1  1 0 0 0   x x x x  x x x x",
+                          "x x x x  x x x x   x x x x  x o o x";
+
+        write           = "1 0 1 0  1 1 0 0   1 1 1 1  1 i i 1",
+                          "x x x x  x x x x   x x x x  x x x x";
+      ;
   ;
 
 
@@ -534,6 +634,20 @@ part
         read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x  x",
                           "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o  o";
       ;
+    memory "fuse"
+	size		= 1;
+	read		= "0  1  0  1   1  0  0  0   x  x  x  x   x  x  x  x",
+			  "x  x  x  x   x  x  x  x   x  x  x  x   x  x  x  o";
+	write		= "1  0  1  0   1  1  0  0   1  0  1  1   1  1  1  i",
+			  "x  x  x  x   x  x  x  x   x  x  x  x   x  x  x  x";
+      ;
+    memory "lock"
+	size		= 1;
+	read		= "0  1  0  1   1  0  0  0   x  x  x  x   x  x  x  x",
+			  "x  x  x  x   x  x  x  x   o  o  x  x   x  x  x  x";
+	write		= "1  0  1  0   1  1  0  0   1  1  1  1   1  i  i  1",
+			  "x  x  x  x   x  x  x  x   x  x  x  x   x  x  x  x";
+      ;
   ;
 
 

avrdude/config_gram.y

@@ -60,6 +60,7 @@
 %token K_NUM_PAGES
 %token K_PART
 %token K_PGMLED
+%token K_PWROFF_AFTER_WRITE
 %token K_PROGRAMMER
 %token K_RDYLED
 %token K_READBACK_P1
@@ -398,6 +399,12 @@ mem_spec :
       free_token($3);
     } |
 
+  K_PWROFF_AFTER_WRITE TKN_EQUAL TKN_NUMBER
+    {
+      current_mem->pwroff_after_write = $3->value.number;
+      free_token($3);
+    } |
+
   K_READBACK_P1     TKN_EQUAL TKN_NUMBER
     {
       current_mem->readback[0] = $3->value.number;

avrdude/lexer.l

@@ -142,6 +142,7 @@ page_size        { yylval=NULL; return K_PAGE_SIZE; }
 paged            { yylval=NULL; return K_PAGED; }
 part             { yylval=NULL; return K_PART; }
 pgmled           { yylval=NULL; return K_PGMLED; }
+pwroff_after_write { yylval=NULL; return K_PWROFF_AFTER_WRITE; }
 programmer       { yylval=NULL; return K_PROGRAMMER; }
 rdyled           { yylval=NULL; return K_RDYLED; }
 readback_p1      { yylval=NULL; return K_READBACK_P1; }

avrdude/main.c

@@ -764,7 +764,7 @@ int main(int argc, char * argv [])
   v = avr_dup_part(p);
 
   if (verbose) {
-    avr_display(stderr, p, progbuf);
+    avr_display(stderr, p, progbuf, verbose);
     fprintf(stderr, "\n");
     pinconfig_display(progbuf);
   }

avrdude/term.c

@@ -303,7 +303,8 @@ int cmd_write(int fd, struct avrpart * p, int argc, char * argv[])
   int len, maxsize;
   char * memtype;
   unsigned long addr, i;
-  char * buf;
+  unsigned char * buf;
+  unsigned char b;
   int rc;
   int werror;
   AVRMEM * mem;
@@ -371,14 +372,23 @@ int cmd_write(int fd, struct avrpart * p, int argc, char * argv[])
 
     rc = avr_write_byte(fd, p, mem, addr+i, buf[i]);
     if (rc) {
-      fprintf(stderr, "%s (write): error writing 0x%02x at 0x%05lx\n",
+      fprintf(stderr, "%s (write): error writing 0x%02x at 0x%05lx, rc=%d\n",
-              progname, buf[i], addr+i);
+              progname, buf[i], addr+i, rc);
       if (rc == -1)
         fprintf(stderr, 
                 "write operation not supported on memory type \"%s\"\n",
                 mem->desc);
       werror = 1;
     }
+
+    rc = avr_read_byte(fd, p, mem, addr+i, &b);
+    if (b != buf[i]) {
+      fprintf(stderr, 
+              "%s (write): error writing 0x%02x at 0x%05lx cell=0x%02x\n",
+              progname, buf[i], addr+i, b);
+      werror = 1;
+    }
+
     if (werror) {
       LED_ON(fd, pgm->pinno[PIN_LED_ERR]);
     }
@@ -446,7 +456,7 @@ int cmd_erase(int fd, struct avrpart * p, int argc, char * argv[])
 int cmd_part(int fd, struct avrpart * p, int argc, char * argv[])
 {
   fprintf(stdout, "\n");
-  avr_display(stdout, p, "");
+  avr_display(stdout, p, "", 0);
   fprintf(stdout, "\n");
 
   return 0;