Add autobaud_sync to avrdude.conf part description

src/avrdude.conf.in

@@ -130,7 +130,7 @@
 #       programfusepolltimeout = <num> ;
 #       programlockpulsewidth = <num> ;           # PP only
 #       programlockpolltimeout = <num> ;
-#       # JTAG ICE mkII parameters, also from ATDF files
+#       # debugWIRE and/or JTAG ICE mkII parameters, also from ATDF files
 #       allowfullpagebitstream = <yes/no> ;
 #       enablepageprogramming = <yes/no> ;
 #       idr              = <num> ;                # IO addr of IDR (OCD) reg
@@ -143,6 +143,8 @@
 #       ocdrev           = <num> ;
 #       pgm_enable       = <instruction format> ;
 #       chip_erase       = <instruction format> ;
+#       # parameters for bootloaders
+#       autobaud_sync    = <num> ;                # autobaud detection byte, default 0x30
 #
 #       memory <memtype>
 #           paged           = <yes/no> ;          # yes/no (flash only, do not use for EEPROM)
@@ -175,12 +177,13 @@
 #
 # If any of the above parameters are not specified, the default value
 # of 0 is used for numerics (except for mcuid, hvupdi_variant and
-# ocdrev, where the default value is -1) or the empty string "" for
+# ocdrev, where the default value is -1, and for autobaud_sync which
-# string values. If a required parameter is left empty, AVRDUDE will
+# defaults to 0x30), or the empty string "" for string values. If a
-# complain. Almost all occurrences of numbers (with the exception of
+# required parameter is left empty, AVRDUDE will complain. Almost all
-# pin numbers and where they are separated by space, eg, in signature
+# occurrences of numbers (with the exception of pin numbers and where
-# and readback) can also be given as simple expressions involving
+# they are separated by space, eg, in signature and readback) can also
-# arithemtic and bitwise operators.
+# be given as simple expressions involving arithemtic and bitwise
+# operators.
 #
 # Parts can also inherit parameters from previously defined parts
 # using the following syntax. In this case specified integer and
@@ -12011,6 +12014,7 @@ part
     n_boot_sections        = 1;
     mcu_base               = 0x0090;
     nvm_base               = 0x01c0;
+    autobaud_sync          = 0x20;
 
     memory "fuse1"
         size               = 1;
@@ -16329,6 +16333,7 @@ part parent "m88"
     id                     = "lgt8f88p";
     mcuid                  = 227;
     signature              = 0x1e 0x93 0x0f;
+    autobaud_sync          = 0x1c;
 ;
 
 #------------------------------------------------------------
@@ -16340,6 +16345,7 @@ part parent "m168"
     id                     = "lgt8f168p";
     mcuid                  = 228;
     signature              = 0x1e 0x94 0x0b;
+    autobaud_sync          = 0x1c;
 ;
 
 #------------------------------------------------------------
@@ -16351,4 +16357,5 @@ part parent "m328"
     id                     = "lgt8f328p";
     mcuid                  = 229;
     signature              = 0x1e 0x95 0x0f;
+    autobaud_sync          = 0x1c;
 ;

src/avrpart.c

@@ -578,6 +578,7 @@ AVRPART *avr_new_part(void) {
   // Default values
   p->mcuid = -1;
   p->hvupdi_variant = -1;
+  p->autobaud_sync = 0x30; // STK_GET_SYNC
   memset(p->signature, 0xFF, 3);
   p->reset_disposition = RESET_DEDICATED;
   p->retry_pulse = PIN_AVR_SCK;

src/config.c

@@ -72,6 +72,7 @@ Component_t avr_comp[] = {
   part_comp_desc(n_page_erase, COMP_INT),
   part_comp_desc(n_boot_sections, COMP_INT),
   part_comp_desc(boot_section_size, COMP_INT),
+  part_comp_desc(autobaud_sync, COMP_CHAR),
 
   // AVRMEM
   mem_comp_desc(n_word_writes, COMP_INT),

src/developer_opts.c

@@ -716,6 +716,7 @@ static void dev_part_strct(const AVRPART *p, bool tsv, const AVRPART *base, bool
   _if_partout(intcmp, "0x%04x", nvm_base);
   _if_partout(intcmp, "0x%04x", ocd_base);
   _if_partout(intcmp, "%d", ocdrev);
+  _if_partout(intcmp, "0x%02x", autobaud_sync);
 
   for(int i=0; i < AVR_OP_MAX; i++)
     if(!base || opcodecmp(p->op[i], base->op[i], i))

src/doc/avrdude.texi

@@ -1925,7 +1925,7 @@ part
     programfusepolltimeout = <num> ;
     programlockpulsewidth = <num> ;           # PP only
     programlockpolltimeout = <num> ;
-    # JTAG ICE mkII parameters, also from ATDF files
+    # debugWIRE and/or JTAG ICE mkII parameters, also from ATDF files
     allowfullpagebitstream = <yes/no> ;
     enablepageprogramming = <yes/no> ;
     idr              = <num> ;                # IO addr of IDR (OCD) reg
@@ -1938,6 +1938,8 @@ part
     ocdrev           = <num> ;
     pgm_enable       = <instruction format> ;
     chip_erase       = <instruction format> ;
+    # parameters for bootloaders
+    autobaud_sync    = <num> ;                # autobaud detection byte, default 0x30
 
     memory <memtype>
         paged           = <yes/no> ;          # yes/no (flash only, do not use for EEPROM)
@@ -1970,14 +1972,14 @@ part
 @end smallexample
 
 @noindent
-If any of the above parameters are not specified, the default value
+If any of the above parameters are not specified, the default value of 0
-of 0 is used for numerics (except for @code{mcuid}, @code{hvupdi_variant} and @code{ocdrev},
+is used for numerics (except for @code{mcuid}, @code{hvupdi_variant} and
-where the default value is -1) or the empty string @code{""} for string
+@code{ocdrev}, where the default value is -1, and for @code{autobaud_sync}
-values. If a required parameter is left empty, AVRDUDE will complain.
+which defaults to 0x30) or the empty string @code{""} for string values.
-Almost all occurrences of numbers (with the exception of pin numbers
+If a required parameter is left empty, AVRDUDE will complain. Almost all
-and where they are separated by space, eg, in signature and readback)
+occurrences of numbers (with the exception of pin numbers and where they
-can also be given as simple expressions involving arithemtic and
+are separated by space, eg, in signature and readback) can also be given
-bitwise operators.
+as simple expressions involving arithemtic and bitwise operators.
 
 @menu
 * Parent Part::

src/lexer.l

@@ -122,7 +122,7 @@ SIGN     [+-]
 
 
 (?x: prog_modes | mcuid | n_interrupts | n_page_erase | n_word_writes | n_boot_sections |
-  boot_section_size ) { /* Components for assignment  */
+  boot_section_size | autobaud_sync) { /* Components for assignment  */
 
   Component_t *cp = cfg_comp_search(yytext, current_strct);
   if(!cp) {

src/libavrdude.h

@@ -252,50 +252,57 @@ typedef struct avrpart {
                                        this pin (PIN_AVR_*) */
   unsigned      flags;              /* see AVRPART_ masks */
 
-  int           timeout;            /* stk500 v2 xml file parameter */
+  /* STK500 v2 parameters from ATDF files */
-  int           stabdelay;          /* stk500 v2 xml file parameter */
+  int           timeout;
-  int           cmdexedelay;        /* stk500 v2 xml file parameter */
+  int           stabdelay;
-  int           synchloops;         /* stk500 v2 xml file parameter */
+  int           cmdexedelay;
-  int           bytedelay;          /* stk500 v2 xml file parameter */
+  int           synchloops;
-  int           pollindex;          /* stk500 v2 xml file parameter */
+  int           bytedelay;
-  unsigned char pollvalue;          /* stk500 v2 xml file parameter */
+  int           pollindex;
-  int           predelay;           /* stk500 v2 xml file parameter */
+  unsigned char pollvalue;
-  int           postdelay;          /* stk500 v2 xml file parameter */
+  int           predelay;
-  int           pollmethod;         /* stk500 v2 xml file parameter */
+  int           postdelay;
+  int           pollmethod;
 
   enum ctl_stack_t ctl_stack_type;  /* what to use the ctl stack for */
   unsigned char controlstack[CTL_STACK_SIZE]; /* stk500v2 PP/HVSP ctl stack */
   unsigned char flash_instr[FLASH_INSTR_SIZE]; /* flash instructions (debugWire, JTAG) */
   unsigned char eeprom_instr[EEPROM_INSTR_SIZE]; /* EEPROM instructions (debugWire, JTAG) */
 
-  int           hventerstabdelay;   /* stk500 v2 hv mode parameter */
+  /* STK500 v2 hv mode parameters */
-  int           progmodedelay;      /* stk500 v2 hv mode parameter */
+  int           hventerstabdelay;
-  int           latchcycles;        /* stk500 v2 hv mode parameter */
+  int           progmodedelay;
-  int           togglevtg;          /* stk500 v2 hv mode parameter */
+  int           latchcycles;
-  int           poweroffdelay;      /* stk500 v2 hv mode parameter */
+  int           togglevtg;
-  int           resetdelayms;       /* stk500 v2 hv mode parameter */
+  int           poweroffdelay;
-  int           resetdelayus;       /* stk500 v2 hv mode parameter */
+  int           resetdelayms;
-  int           hvleavestabdelay;   /* stk500 v2 hv mode parameter */
+  int           resetdelayus;
-  int           resetdelay;         /* stk500 v2 hv mode parameter */
+  int           hvleavestabdelay;
-  int           chiperasepulsewidth; /* stk500 v2 hv mode parameter */
+  int           resetdelay;
-  int           chiperasepolltimeout; /* stk500 v2 hv mode parameter */
+  int           chiperasepulsewidth;
-  int           chiperasetime;      /* stk500 v2 hv mode parameter */
+  int           chiperasepolltimeout;
-  int           programfusepulsewidth; /* stk500 v2 hv mode parameter */
+  int           chiperasetime;
-  int           programfusepolltimeout; /* stk500 v2 hv mode parameter */
+  int           programfusepulsewidth;
-  int           programlockpulsewidth; /* stk500 v2 hv mode parameter */
+  int           programfusepolltimeout;
-  int           programlockpolltimeout; /* stk500 v2 hv mode parameter */
+  int           programlockpulsewidth;
-  int           synchcycles;        /* stk500 v2 hv mode parameter */
+  int           programlockpolltimeout;
-  int           hvspcmdexedelay;    /* stk500 v2 hv mode file parameter */
+  int           synchcycles;
+  int           hvspcmdexedelay;
 
-  unsigned char idr;                /* JTAG ICE mkII XML file parameter */
+
-  unsigned char rampz;              /* JTAG ICE mkII XML file parameter */
+  /* debugWIRE and/or JTAG ICE mkII XML file parameters */
-  unsigned char spmcr;              /* JTAG ICE mkII XML file parameter */
+  unsigned char idr;            /* I/O address of IDR (OCD) reg */
-  unsigned char eecr;               /* JTAC ICE mkII XML file parameter */
+  unsigned char rampz;          /* I/O address of RAMPZ reg */
+  unsigned char spmcr;          /* memory address of SPMCR reg */
+  unsigned char eecr;           /* memory address of EECR reg */
   unsigned int mcu_base;        /* Base address of MCU control block in ATxmega devices */
   unsigned int nvm_base;        /* Base address of NVM controller in ATxmega devices */
   unsigned int ocd_base;        /* Base address of OCD module in AVR8X/UPDI devices */
   int           ocdrev;         /* OCD revision (JTAGICE3 parameter, from AS6 XML files) */
 
+  /* Bootloader paramater */
+  unsigned char autobaud_sync;  /* Sync byte for bootloader autobaud,  must be <= 0x30 */
+
   OPCODE      * op[AVR_OP_MAX]; /* opcodes */
 
   LISTID        mem;            /* avr memory definitions */