Submitted by Jan Egil Ruud <janegil.ruud@microchip.com>

patch #9482: Add support for UPDI and AVR8X
* avrdude.conf.in (xplainedpro_updi): New programmer
* avrdude.conf.in (.avr8x, ATtiny1617, ATtiny817): New device
family and devices
* config_gram.y: add K_OCD_BASE and K_HAS_UPDI
* lexer.l: (Ditto.)
* doc/avrdude.texi: Document "has_updi" flag
* jtag3.c: Implement UPDI
* jtag3.h: (Ditto.)
* jtag3_private.h: (Ditto.)
* libavrdude.h: Add ocd_base value and AVRPART_HAS_UPDI flag
* pgm_type.c: Add jtagice3_updi




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1398 81a1dc3b-b13d-400b-aceb-764788c761c2

AUTHORS

@@ -23,6 +23,7 @@ Contributors:
 	Brett Hagman <bhagman@roguerobotics.com>
 	Rene Liebscher <r.liebscher@gmx.de>
 	Jim Paris <jim@jtan.com>
+	Jan Egil Ruud <janegil.ruud@microchip.com>
 
 For minor contributions, please see the ChangeLog files.
 

ChangeLog

@@ -1,3 +1,19 @@
+2017-11-29  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
+
+	Submitted by Jan Egil Ruud <janegil.ruud@microchip.com>
+	patch #9482: Add support for UPDI and AVR8X
+	* avrdude.conf.in (xplainedpro_updi): New programmer
+	* avrdude.conf.in (.avr8x, ATtiny1617, ATtiny817): New device
+	family and devices
+	* config_gram.y: add K_OCD_BASE and K_HAS_UPDI
+	* lexer.l: (Ditto.)
+	* doc/avrdude.texi: Document "has_updi" flag
+	* jtag3.c: Implement UPDI
+	* jtag3.h: (Ditto.)
+	* jtag3_private.h: (Ditto.)
+	* libavrdude.h: Add ocd_base value and AVRPART_HAS_UPDI flag
+	* pgm_type.c: Add jtagice3_updi
+
 2017-11-29  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
 
 	Submitted by Jan Egil Ruud <janegil.ruud@microchip.com>

NEWS

@@ -12,20 +12,26 @@ Current:
     - libhidapi support (part of patch #8717)
     - use libhidapi as (optional) transport for CMSIS-DAP compliant
       debuggers (JTAGICE3 with firmware 3+, AtmelICE, EDBG, mEDBG)
+    - UPDI support added (AVR8X family)
 
   * New devices supported:
 
     - ATmega328PB
+    - AVR8X family, ATtiny1617, ATtiny817
 
   * New programmers supported:
 
     - ehajo-isp (commercial version of USBtiny)
+    - XplainedPro in UPDI mode
 
   * Bugfixes:
     bug #47550: Linux GPIO broken
     bug #47718: "lfuse reads as" not displayed in verbose mode - SOLUTION
     bug #48084: Avoid compiled-in timestamp for reproducible release builds
 
+  * Patches:
+    patch #9482: Add support for UPDI and AVR8X
+
   * Internals:
 
 

avrdude.conf.in

@@ -55,6 +55,7 @@
 #       has_jtag         = <yes/no> ;             # part has JTAG i/f
 #       has_debugwire    = <yes/no> ;             # part has debugWire i/f
 #       has_pdi          = <yes/no> ;             # part has PDI i/f
+#       has_updi         = <yes/no> ;             # part has UPDI i/f
 #       has_tpi          = <yes/no> ;             # part has TPI i/f
 #       devicecode       = <num> ;            # deprecated, use stk500_devcode
 #       stk500_devcode   = <num> ;                # numeric
@@ -1104,6 +1105,14 @@ programmer
   usbpid = 0x2111;
 ;
 
+programmer
+  id    = "xplainedpro_updi";
+  desc  = "Atmel AVR XplainedPro in UPDI mode";
+  type  = "jtagice3_updi";
+  connection_type = usb;
+  usbpid = 0x2111;
+;
+
 programmer
   id    = "xplainedmini";
   desc  = "Atmel AVR XplainedMini in ISP mode";
@@ -1136,6 +1145,14 @@ programmer
   usbpid = 0x2141;
 ;
 
+programmer
+  id    = "atmelice_updi";
+  desc  = "Atmel-ICE (ARM/AVR) in UPDI mode";
+  type  = "jtagice3_updi";
+  connection_type = usb;
+  usbpid = 0x2141;
+;
+
 programmer
   id    = "atmelice_dw";
   desc  = "Atmel-ICE (ARM/AVR) in debugWIRE mode";
@@ -14989,4 +15006,136 @@ part
     ;
 ;
 
+#------------------------------------------------------------
+# AVR8X family common values
+#------------------------------------------------------------
 
+part
+    id		= ".avr8x";
+    desc	= "AVR8X family common values";
+    has_updi	= yes;
+    nvm_base	= 0x1000;
+    ocd_base	= 0x0F80;
+
+    memory "signature"
+        size		= 3;
+        offset		= 0x1100;
+    ;
+
+    memory "userrow"
+        size		= 0x20;
+        offset		= 0x1300;
+        page_size	= 0x20;
+        readsize	= 0x100;
+    ;
+
+    memory "prodsig"
+        size		= 0x3D;
+        offset		= 0x1103;
+        page_size	= 0x3D;
+        readsize	= 0x3D;
+    ;
+
+    memory "fuses"
+        size		= 9;
+        offset		= 0x1280;
+    ;
+
+    memory "fuse0"
+        size		= 1;
+        offset		= 0x1280;
+    ;
+
+    memory "fuse1"
+        size		= 1;
+        offset		= 0x1281;
+    ;
+
+    memory "fuse2"
+        size		= 1;
+        offset		= 0x1282;
+    ;
+
+    memory "fuse4"
+        size		= 1;
+        offset		= 0x1284;
+    ;
+
+    memory "fuse5"
+        size		= 1;
+        offset		= 0x1285;
+    ;
+
+    memory "fuse6"
+        size		= 1;
+        offset		= 0x1286;
+    ;
+
+    memory "fuse7"
+        size		= 1;
+        offset		= 0x1287;
+    ;
+
+    memory "fuse8"
+        size		= 1;
+        offset		= 0x1288;
+    ;
+
+    memory "lock"
+        size		= 1;
+        offset		= 0x128a;
+    ;
+
+    memory "data"
+        # SRAM, only used to supply the offset
+        offset		= 0x1000000;
+    ;
+;
+
+#------------------------------------------------------------
+# ATtiny1617
+#------------------------------------------------------------
+
+part parent ".avr8x"
+    id		= "tn1617";
+    desc	= "ATtiny1617";
+    signature	= 0x1e 0x94 0x20;
+
+    memory "eeprom"
+        size		= 0x0100;
+        offset		= 0x1400;
+        page_size	= 0x20;
+        readsize	= 0x100;
+    ;
+
+    memory "flash"
+        size		= 0x4000;
+        offset		= 0x8000;
+        page_size	= 0x40;
+        readsize	= 0x100;
+    ;
+;
+
+#------------------------------------------------------------
+# ATtiny817
+#------------------------------------------------------------
+
+part parent ".avr8x"
+    id		= "tn817";
+    desc	= "ATtiny817";
+    signature	= 0x1e 0x93 0x20;
+
+    memory "eeprom"
+        size		= 0x0100;
+        offset		= 0x1400;
+        page_size	= 0x20;
+        readsize	= 0x100;
+    ;
+
+    memory "flash"
+        size		= 0x2000;
+        offset		= 0x8000;
+        page_size	= 0x40;
+        readsize	= 0x100;
+    ;
+;

config_gram.y

@@ -96,6 +96,7 @@ static int pin_name;
 %token K_MOSI
 %token K_NUM_PAGES
 %token K_NVM_BASE
+%token K_OCD_BASE
 %token K_OCDREV
 %token K_OFFSET
 %token K_PAGEL
@@ -183,6 +184,7 @@ static int pin_name;
 %token K_HAS_JTAG		/* MCU has JTAG i/f. */
 %token K_HAS_DW			/* MCU has debugWire i/f. */
 %token K_HAS_PDI                /* MCU has PDI i/f rather than ISP (ATxmega). */
+%token K_HAS_UPDI               /* MCU has UPDI i/f (AVR8X). */
 %token K_HAS_TPI                /* MCU has TPI i/f rather than ISP (ATtiny4/5/9/10). */
 %token K_IDR			/* address of OCD register in IO space */
 %token K_IS_AT90S1200		/* chip is an AT90S1200 (needs special treatment) */
@@ -1062,6 +1064,16 @@ part_parm :
       free_token($3);
     } |
 
+  K_HAS_UPDI TKN_EQUAL yesno
+    {
+      if ($3->primary == K_YES)
+        current_part->flags |= AVRPART_HAS_UPDI;
+      else if ($3->primary == K_NO)
+        current_part->flags &= ~AVRPART_HAS_UPDI;
+
+      free_token($3);
+    } |
+
   K_HAS_TPI TKN_EQUAL yesno
     {
       if ($3->primary == K_YES)
@@ -1148,6 +1160,12 @@ part_parm :
       free_token($3);
     } |
 
+ K_OCD_BASE TKN_EQUAL TKN_NUMBER
+    {
+      current_part->ocd_base = $3->value.number;
+      free_token($3);
+    } |
+
   K_OCDREV          TKN_EQUAL TKN_NUMBER
     {
       current_part->ocdrev = $3->value.number;

doc/avrdude.texi

@@ -1440,6 +1440,7 @@ part
     has_jtag         = <yes/no> ;             # part has JTAG i/f
     has_debugwire    = <yes/no> ;             # part has debugWire i/f
     has_pdi          = <yes/no> ;             # part has PDI i/f
+    has_updi         = <yes/no> ;             # part has UPDI i/f
     has_tpi          = <yes/no> ;             # part has TPI i/f
     devicecode       = <num> ;                # numeric
     stk500_devcode   = <num> ;                # numeric

jtag3.c

@@ -84,6 +84,7 @@ struct pdata
 #define PGM_FL_IS_PDI           (0x0002)
 #define PGM_FL_IS_JTAG          (0x0004)
 #define PGM_FL_IS_EDBG          (0x0008)
+#define PGM_FL_IS_UPDI          (0x0010)
 
 static int jtag3_open(PROGRAMMER * pgm, char * port);
 static int jtag3_edbg_prepare(PROGRAMMER * pgm);
@@ -1014,6 +1015,10 @@ static int jtag3_initialize(PROGRAMMER * pgm, AVRPART * p)
     ifname = "PDI";
     if (p->flags & AVRPART_HAS_PDI)
       conn = PARM3_CONN_PDI;
+  } else if (pgm->flag & PGM_FL_IS_UPDI) {
+    ifname = "UPDI";
+    if (p->flags & AVRPART_HAS_UPDI)
+      conn = PARM3_CONN_UPDI;
   } else {
     ifname = "JTAG";
     if (p->flags & AVRPART_HAS_JTAG)
@@ -1028,6 +1033,8 @@ static int jtag3_initialize(PROGRAMMER * pgm, AVRPART * p)
 
   if (p->flags & AVRPART_HAS_PDI)
     parm[0] = PARM3_ARCH_XMEGA;
+  else if (p->flags & AVRPART_HAS_UPDI)
+    parm[0] = PARM3_ARCH_UPDI;
   else if (p->flags & AVRPART_HAS_DW)
     parm[0] = PARM3_ARCH_TINY;
   else
@@ -1043,7 +1050,7 @@ static int jtag3_initialize(PROGRAMMER * pgm, AVRPART * p)
   if (jtag3_setparm(pgm, SCOPE_AVR, 1, PARM3_CONNECTION, parm, 1) < 0)
     return -1;
 
-  if (conn == PARM3_CONN_PDI)
+  if (conn == PARM3_CONN_PDI || conn == PARM3_CONN_UPDI)
     PDATA(pgm)->set_sck = jtag3_set_sck_xmega_pdi;
   else if (conn == PARM3_CONN_JTAG) {
     if (p->flags & AVRPART_HAS_PDI)
@@ -1119,6 +1126,50 @@ static int jtag3_initialize(PROGRAMMER * pgm, AVRPART * p)
     if (jtag3_setparm(pgm, SCOPE_AVR, 2, PARM3_DEVICEDESC, (unsigned char *)&xd, sizeof xd) < 0)
       return -1;
   }
+  else if ((p->flags & AVRPART_HAS_UPDI))
+  {
+    struct updi_device_desc xd;
+    LNODEID ln;
+    AVRMEM *m;
+
+    u16_to_b2(xd.nvm_base_addr, p->nvm_base);
+    u16_to_b2(xd.ocd_base_addr, p->ocd_base);
+
+    for (ln = lfirst(p->mem); ln; ln = lnext(ln))
+    {
+      m = ldata(ln);
+      if (strcmp(m->desc, "flash") == 0)
+      {
+        u16_to_b2(xd.prog_base, m->offset);
+
+        if (m->readsize != 0 && m->readsize < m->page_size)
+          PDATA(pgm)->flash_pagesize = m->readsize;
+        else
+          PDATA(pgm)->flash_pagesize = m->page_size;
+        xd.flash_page_size = m->page_size;
+      }
+      else if (strcmp(m->desc, "eeprom") == 0)
+      {
+        PDATA(pgm)->eeprom_pagesize = m->page_size;
+        xd.eeprom_page_size = m->page_size;
+      }
+    }
+
+    avrdude_message(MSG_NOTICE2, "UPDI SET: \n\t"
+      "xd->prog_base=%x %x\n\t"
+      "xd->flash_page_size=%x\n\t"
+      "xd->eeprom_page_size=%x\n\t"
+      "xd->nvmctrl=%x %x\n\t"
+      "xd->ocd=%x %x\n",
+      xd.prog_base[0], xd.prog_base[1],
+      xd.flash_page_size,
+      xd.eeprom_page_size,
+      xd.nvm_base_addr[0], xd.nvm_base_addr[1],
+      xd.ocd_base_addr[0], xd.ocd_base_addr[1]);
+
+    if (jtag3_setparm(pgm, SCOPE_AVR, 2, PARM3_DEVICEDESC, (unsigned char *)&xd, sizeof xd) < 0)
+      return -1;
+  }
   else
   {
     struct mega_device_desc md;
@@ -1443,6 +1494,18 @@ static int jtag3_open_pdi(PROGRAMMER * pgm, char * port)
   return 0;
 }
 
+static int jtag3_open_updi(PROGRAMMER * pgm, char * port)
+{
+  avrdude_message(MSG_NOTICE2, "%s: jtag3_open_updi()\n", progname);
+
+  if (jtag3_open_common(pgm, port) < 0)
+    return -1;
+
+  if (jtag3_getsync(pgm, PARM3_CONN_UPDI) < 0)
+    return -1;
+
+  return 0;
+}
 
 void jtag3_close(PROGRAMMER * pgm)
 {
@@ -1571,7 +1634,7 @@ static int jtag3_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
     cmd[3] = MTYPE_USERSIG;
   } else if ( ( strcmp(m->desc, "boot") == 0 ) ) {
     cmd[3] = MTYPE_BOOT_FLASH;
-  } else if ( p->flags & AVRPART_HAS_PDI ) {
+  } else if ( p->flags & AVRPART_HAS_PDI || p->flags & AVRPART_HAS_UPDI ) {
     cmd[3] = MTYPE_FLASH;
   } else {
     cmd[3] = MTYPE_SPM;
@@ -1648,7 +1711,7 @@ static int jtag3_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
       /* dynamically decide between flash/boot memtype */
       dynamic_memtype = 1;
   } else if (strcmp(m->desc, "eeprom") == 0) {
-    cmd[3] = ( p->flags & AVRPART_HAS_PDI ) ? MTYPE_EEPROM : MTYPE_EEPROM_PAGE;
+    cmd[3] = ( p->flags & AVRPART_HAS_PDI || p->flags & AVRPART_HAS_UPDI ) ? MTYPE_EEPROM : MTYPE_EEPROM_PAGE;
     if (pgm->flag & PGM_FL_IS_DW)
       return -1;
   } else if ( ( strcmp(m->desc, "prodsig") == 0 ) ) {
@@ -1657,7 +1720,7 @@ static int jtag3_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
     cmd[3] = MTYPE_USERSIG;
   } else if ( ( strcmp(m->desc, "boot") == 0 ) ) {
     cmd[3] = MTYPE_BOOT_FLASH;
-  } else if ( p->flags & AVRPART_HAS_PDI ) {
+  } else if ( p->flags & AVRPART_HAS_PDI || p->flags & AVRPART_HAS_UPDI ) {
     cmd[3] = MTYPE_FLASH;
   } else {
     cmd[3] = MTYPE_SPM;
@@ -1716,7 +1779,9 @@ static int jtag3_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
   cmd[1] = CMD3_READ_MEMORY;
   cmd[2] = 0;
 
-  cmd[3] = ( p->flags & AVRPART_HAS_PDI ) ? MTYPE_FLASH : MTYPE_FLASH_PAGE;
+  cmd[3] = ( p->flags & AVRPART_HAS_PDI || p->flags & AVRPART_HAS_UPDI ) ? MTYPE_FLASH : MTYPE_FLASH_PAGE;
+  if (p->flags & AVRPART_HAS_UPDI)
+      addr += mem->offset;
   if (strcmp(mem->desc, "flash") == 0 ||
       strcmp(mem->desc, "application") == 0 ||
       strcmp(mem->desc, "apptable") == 0 ||
@@ -1727,7 +1792,7 @@ static int jtag3_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
     paddr_ptr = &PDATA(pgm)->flash_pageaddr;
     cache_ptr = PDATA(pgm)->flash_pagecache;
   } else if (strcmp(mem->desc, "eeprom") == 0) {
-    if ( (pgm->flag & PGM_FL_IS_DW) || ( p->flags & AVRPART_HAS_PDI ) ) {
+    if ( (pgm->flag & PGM_FL_IS_DW) || ( p->flags & AVRPART_HAS_PDI ) || ( p->flags & AVRPART_HAS_UPDI ) ) {
       cmd[3] = MTYPE_EEPROM;
     } else {
       cmd[3] = MTYPE_EEPROM_PAGE;
@@ -1757,7 +1822,8 @@ static int jtag3_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
       unsupp = 1;
   } else if (strncmp(mem->desc, "fuse", strlen("fuse")) == 0) {
     cmd[3] = MTYPE_FUSE_BITS;
-    addr = mem->offset & 7;
+    if (!(p->flags & AVRPART_HAS_UPDI))
+      addr = mem->offset & 7;
   } else if (strcmp(mem->desc, "usersig") == 0) {
     cmd[3] = MTYPE_USERSIG;
   } else if (strcmp(mem->desc, "prodsig") == 0) {
@@ -1778,7 +1844,11 @@ static int jtag3_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
      * harm for other connection types either.
      */
     u32_to_b4(cmd + 8, 3);
-    u32_to_b4(cmd + 4, 0);
+    u32_to_b4(cmd + 4, mem->offset);
+
+    if (p->flags & AVRPART_HAS_UPDI){
+        addr -= mem->offset;
+    }
 
     if (addr == 0) {
       if ((status = jtag3_command(pgm, cmd, 12, &resp, "read memory")) < 0)
@@ -1867,7 +1937,9 @@ static int jtag3_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
   cmd[0] = SCOPE_AVR;
   cmd[1] = CMD3_WRITE_MEMORY;
   cmd[2] = 0;
-  cmd[3] = ( p->flags & AVRPART_HAS_PDI ) ? MTYPE_FLASH : MTYPE_SPM;
+  cmd[3] = ( p->flags & AVRPART_HAS_PDI || p->flags & AVRPART_HAS_UPDI ) ? MTYPE_FLASH : MTYPE_SPM;
+  if (p->flags & AVRPART_HAS_UPDI)
+      addr += mem->offset;
   if (strcmp(mem->desc, "flash") == 0) {
      cache_ptr = PDATA(pgm)->flash_pagecache;
      pagesize = PDATA(pgm)->flash_pagesize;
@@ -1899,9 +1971,12 @@ static int jtag3_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
       unsupp = 1;
   } else if (strncmp(mem->desc, "fuse", strlen("fuse")) == 0) {
     cmd[3] = MTYPE_FUSE_BITS;
-    addr = mem->offset & 7;
+    if (!(p->flags & AVRPART_HAS_UPDI))
+      addr = mem->offset & 7;
   } else if (strcmp(mem->desc, "usersig") == 0) {
     cmd[3] = MTYPE_USERSIG;
+  } else if (strcmp(mem->desc, "userrow") == 0) {
+    cmd[3] = MTYPE_USERSIG;
   } else if (strcmp(mem->desc, "prodsig") == 0) {
     cmd[3] = MTYPE_PRODSIG;
   } else if (strncmp(mem->desc, "lock", 4) == 0) {
@@ -2179,6 +2254,11 @@ static unsigned int jtag3_memaddr(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, uns
   /*
    * Non-Xmega device.
    */
+  if (p->flags & AVRPART_HAS_UPDI) {
+    if (strcmp(m->desc, "flash") != 0) {
+        addr += m->offset;
+    }
+  }
   return addr;
 }
 
@@ -2284,3 +2364,37 @@ void jtag3_pdi_initpgm(PROGRAMMER * pgm)
   pgm->flag           = PGM_FL_IS_PDI;
 }
 
+const char jtag3_updi_desc[] = "Atmel JTAGICE3 in UPDI mode";
+
+void jtag3_updi_initpgm(PROGRAMMER * pgm)
+{
+  strcpy(pgm->type, "JTAGICE3_UPDI");
+
+  /*
+   * mandatory functions
+   */
+  pgm->initialize     = jtag3_initialize;
+  pgm->display        = jtag3_display;
+  pgm->enable         = jtag3_enable;
+  pgm->disable        = jtag3_disable;
+  pgm->program_enable = jtag3_program_enable_dummy;
+  pgm->chip_erase     = jtag3_chip_erase;
+  pgm->open           = jtag3_open_updi;
+  pgm->close          = jtag3_close;
+  pgm->read_byte      = jtag3_read_byte;
+  pgm->write_byte     = jtag3_write_byte;
+
+  /*
+   * optional functions
+   */
+  pgm->paged_write    = jtag3_paged_write;
+  pgm->paged_load     = jtag3_paged_load;
+  pgm->page_erase     = jtag3_page_erase;
+  pgm->print_parms    = jtag3_print_parms;
+  pgm->set_sck_period = jtag3_set_sck_period;
+  pgm->setup          = jtag3_setup;
+  pgm->teardown       = jtag3_teardown;
+  pgm->page_size      = 256;
+  pgm->flag           = PGM_FL_IS_UPDI;
+}
+

jtag3.h

@@ -41,9 +41,11 @@ int jtag3_command(PROGRAMMER *pgm, unsigned char *cmd, unsigned int cmdlen,
 extern const char jtag3_desc[];
 extern const char jtag3_dw_desc[];
 extern const char jtag3_pdi_desc[];
+extern const char jtag3_updi_desc[];
 void jtag3_initpgm (PROGRAMMER * pgm);
 void jtag3_dw_initpgm (PROGRAMMER * pgm);
 void jtag3_pdi_initpgm (PROGRAMMER * pgm);
+void jtag3_updi_initpgm (PROGRAMMER * pgm);
 
 /*
  * These functions are referenced from stk500v2.c for JTAGICE3 in

jtag3_private.h

@@ -109,6 +109,7 @@
 #define CMD3_GET_PARAMETER         0x02
 #define CMD3_SIGN_ON               0x10
 #define CMD3_SIGN_OFF              0x11 /* takes one parameter? */
+#define CMD3_GET_ID                0x12
 #define CMD3_START_DW_DEBUG        0x13
 #define CMD3_MONCON_DISABLE        0x17
 
@@ -165,6 +166,7 @@
 #define MTYPE_EEPROM_XMEGA 0xc4	/* xmega EEPROM in debug mode - undocumented in AVR067 */
 #define MTYPE_USERSIG     0xc5	/* xmega user signature - undocumented in AVR067 */
 #define MTYPE_PRODSIG     0xc6	/* xmega production signature - undocumented in AVR067 */
+#define MTYPE_SIB         0xD3  /* AVR8X System Information Block */
 
 /*
  * Parameters are divided into sections, where the section number
@@ -189,6 +191,7 @@
 #  define PARM3_ARCH_TINY   1   /* also small megaAVR with ISP/DW only */
 #  define PARM3_ARCH_MEGA   2
 #  define PARM3_ARCH_XMEGA  3
+#  define PARM3_ARCH_UPDI   5   /* AVR devices with UPDI i/f */
 
 #define PARM3_SESS_PURPOSE 0x01 /* section 0, AVR scope, 1 byte */
 #  define PARM3_SESS_PROGRAMMING 1
@@ -199,6 +202,7 @@
 #  define PARM3_CONN_JTAG   4
 #  define PARM3_CONN_DW     5
 #  define PARM3_CONN_PDI    6
+#  define PARM3_CONN_UPDI   8
 
 
 #define PARM3_JTAGCHAIN   0x01  /* JTAG chain info, AVR scope (units
@@ -316,4 +320,13 @@ struct xmega_device_desc {
     unsigned char nvm_base_addr[2];	// IO space base address of NVM controller
     unsigned char mcu_base_addr[2];	// IO space base address of MCU control
 };
+
+/* UPDI device descriptor */
+struct updi_device_desc {
+    unsigned char prog_base[2];
+    unsigned char flash_page_size;
+    unsigned char eeprom_page_size;
+    unsigned char nvm_base_addr[2];
+    unsigned char ocd_base_addr[2];
+};
 #endif /* JTAG3_PRIVATE_EXPORTED */

lexer.l

@@ -152,6 +152,7 @@ has_debugwire    { yylval=NULL; return K_HAS_DW; }
 has_jtag         { yylval=NULL; return K_HAS_JTAG; }
 has_pdi          { yylval=NULL; return K_HAS_PDI; }
 has_tpi          { yylval=NULL; return K_HAS_TPI; }
+has_updi         { yylval=NULL; return K_HAS_UPDI; }
 hventerstabdelay { yylval=NULL; return K_HVENTERSTABDELAY; }
 hvleavestabdelay { yylval=NULL; return K_HVLEAVESTABDELAY; }
 hvsp_controlstack  { yylval=NULL; return K_HVSP_CONTROLSTACK; }
@@ -176,6 +177,7 @@ no               { yylval=new_token(K_NO); return K_NO; }
 num_banks        { yylval=NULL; return K_NUM_PAGES; }
 num_pages        { yylval=NULL; return K_NUM_PAGES; }
 nvm_base         { yylval=NULL; return K_NVM_BASE; }
+ocd_base         { yylval=NULL; return K_OCD_BASE; }
 ocdrev           { yylval=NULL; return K_OCDREV; }
 offset           { yylval=NULL; return K_OFFSET; }
 page_size        { yylval=NULL; return K_PAGE_SIZE; }

libavrdude.h

@@ -199,6 +199,7 @@ typedef struct opcode {
 #define AVRPART_WRITE          0x0400  /* at least one write operation specified */
 #define AVRPART_HAS_TPI        0x0800  /* part has TPI i/f rather than ISP (ATtiny4/5/9/10) */
 #define AVRPART_IS_AT90S1200   0x1000  /* part is an AT90S1200 (needs special treatment) */
+#define AVRPART_HAS_UPDI       0x2000  /* part has UPDI i/f (AVR8X) */
 
 #define AVR_DESCLEN 64
 #define AVR_IDLEN   32
@@ -264,6 +265,7 @@ typedef struct avrpart {
   unsigned short eecr;              /* JTAC ICE mkII XML file parameter */
   unsigned int mcu_base;            /* Base address of MCU control block in ATxmega devices */
   unsigned int nvm_base;            /* Base address of NVM controller in ATxmega devices */
+  unsigned int ocd_base;            /* Base address of OCD module in AVR8X/UPDI devices */
   int           ocdrev;             /* OCD revision (JTAGICE3 parameter, from AS6 XML files) */
 
   OPCODE      * op[AVR_OP_MAX];     /* opcodes */

pgm_type.c

@@ -77,6 +77,7 @@ const PROGRAMMER_TYPE programmers_types[] = {
         {"jtagmkii_pdi", jtagmkII_pdi_initpgm, jtagmkII_pdi_desc},
         {"jtagice3", jtag3_initpgm, jtag3_desc},
         {"jtagice3_pdi", jtag3_pdi_initpgm, jtag3_pdi_desc},
+        {"jtagice3_updi", jtag3_updi_initpgm, jtag3_updi_desc},
         {"jtagice3_dw", jtag3_dw_initpgm, jtag3_dw_desc},
         {"jtagice3_isp", stk500v2_jtag3_initpgm, stk500v2_jtag3_desc},
         {"linuxgpio", linuxgpio_initpgm, linuxgpio_desc},