avr/avrdude
2
0
Fork 0
mirror of https://github.com/mariusgreuel/avrdude.git synced 2025-12-15 02:01:07 +00:00
Code Issues Projects Releases Wiki Activity

Change the name from AVRPROG to AVRDUDE.

Browse Source 
This change represents a name change only.  There is currently an
effort to port AVRPROG to other platforms including Linux and Windows.
Since Atmel's programmer binary that's included within their AVR
Studio software is named AVRPROG.EXE on the Windows OS, there is the
chance for confusion if we keep calling this program AVRPROG as well.
Up until now the name hasn't really been a problem since there was no
chance to confuse 'avrprog' on Unix with Atmel's AVRPROG because
Atmel's tools only run on Windows.  But with the Unix 'avrprog'
possibly being ported to Windows, I felt a name change was the best
way to avoid problems.

So - from this point forward, my FreeBSD Unix program formerly known
as AVRPROG will subsequently be known as AVRDUDE (AVR Downloader/UploaDEr).

This change also represents a time when the AVRDUDE sources move from
my own private repository to a public repository.  This will give
other developers a chance to port AVRDUDE to other platforms and
extend its functionality to support additional programming hardware,
etc.

So goodbye AVRPROG, welcome AVRDUDE!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@170 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Brian S. Dean
2003-02-06 05:13:32 +00:00
parent 94ff57fbe4
commit 17427c0645
11 changed files with 103 additions and 109 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
avrdude.conf.sample
View File

@@ -1,13 +1,13 @@
# $Id$
#
# AVRPROG Configuration File
# AVRDUDE Configuration File
#
# This file contains configuration data used by AVRPROG which describes
# This file contains configuration data used by AVRDUDE which describes
# the programming hardware pinouts and also provides part definitions.
# AVRPROG's "-C" command line option specifies the location of the
# AVRDUDE's "-C" command line option specifies the location of the
# configuration file. The "-c" option names the programmer configuration
# which must match one of the entry's "id" parameter. The "-p" option
# identifies which part AVRPROG is going to be programming and must match
# identifies which part AVRDUDE is going to be programming and must match
# one of the parts' "id" parameter.
#
# Possible entry formats are:
@@ -58,7 +58,7 @@
#
# If any of the above parameters are not specified, the default value
# of 0 is used for numerics or the empty string ("") for string
# values. If a required parameter is left empty, AVRPROG will
# values. If a required parameter is left empty, AVRDUDE will
# complain.
#
# NOTES:
@@ -69,9 +69,9 @@
# * Example memory types are:
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high
# fuse), "signature", "calibration", "lock"
# * The memory type specified on the avrprog command line must match
# * The memory type specified on the avrdude command line must match
# one of the memory types defined for the specified chip.
# * The pwroff_after_write flag causes avrprog to attempt to
# * The pwroff_after_write flag causes avrdude to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message