bug #46610: Floating point exception (core dumped) arch linux rpi2

bug #46483: version 6.2. ser_open(): can't set attributes for device
* ser_posix.c: Back out change from patch #8380



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1365 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2015-12-09 22:45:57 +00:00
parent 7d2a1c916b
commit 172f34f872
3 changed files with 12 additions and 83 deletions

View File

@ -1,3 +1,9 @@
2015-12-09 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #46610: Floating point exception (core dumped) arch linux rpi2
bug #46483: version 6.2. ser_open(): can't set attributes for device
* ser_posix.c: Back out change from patch #8380
2015-11-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de> 2015-11-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: Bump for post-release 6.2. * configure.ac: Bump for post-release 6.2.

1
NEWS
View File

@ -76,7 +76,6 @@ Version 6.2:
- bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2 - bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2
- bug #42908: no external reset at JTAGICE3 - bug #42908: no external reset at JTAGICE3
- patch #8437: [PATCH] Serial-over-ethernet for Win32 - patch #8437: [PATCH] Serial-over-ethernet for Win32
- patch #8380: adds 500k 1M 2M baud to ser_posix.c
- bug #44717: avrdude creates empty flash dump - bug #44717: avrdude creates empty flash dump
* Internals: * Internals:

View File

@ -37,9 +37,6 @@
#include <sys/socket.h> #include <sys/socket.h>
#include <netdb.h> #include <netdb.h>
#include <netinet/in.h> #include <netinet/in.h>
#ifdef __linux__
#include <linux/serial.h>
#endif
#include <fcntl.h> #include <fcntl.h>
#include <termios.h> #include <termios.h>
@ -55,13 +52,8 @@ struct baud_mapping {
speed_t speed; speed_t speed;
}; };
static struct termios original_termios; /* There are a lot more baud rates we could handle, but what's the point? */
static int saved_original_termios;
#if !defined __linux__
/* For linux this mapping is no longer needed.
* (OSX and *BSD do not need this mapping either because for them,
* Bxxx is the same as xxx.) */
static struct baud_mapping baud_lookup_table [] = { static struct baud_mapping baud_lookup_table [] = {
{ 1200, B1200 }, { 1200, B1200 },
{ 2400, B2400 }, { 2400, B2400 },
@ -81,6 +73,8 @@ static struct baud_mapping baud_lookup_table [] = {
{ 0, 0 } /* Terminator. */ { 0, 0 } /* Terminator. */
}; };
static struct termios original_termios;
static int saved_original_termios;
static speed_t serial_baud_lookup(long baud) static speed_t serial_baud_lookup(long baud)
{ {
@ -101,19 +95,12 @@ static speed_t serial_baud_lookup(long baud)
return baud; return baud;
} }
#endif
static int ser_setspeed(union filedescriptor *fd, long baud) static int ser_setspeed(union filedescriptor *fd, long baud)
{ {
int rc; int rc;
struct termios termios; struct termios termios;
#if defined __linux__
/* for linux no conversion is needed*/
speed_t speed = baud;
#else
/* converting the baud rate to the bit set needed by posix way*/
speed_t speed = serial_baud_lookup (baud); speed_t speed = serial_baud_lookup (baud);
#endif
if (!isatty(fd->ifd)) if (!isatty(fd->ifd))
return -ENOTTY; return -ENOTTY;
@ -141,79 +128,16 @@ static int ser_setspeed(union filedescriptor *fd, long baud)
termios.c_cflag = (CS8 | CREAD | CLOCAL); termios.c_cflag = (CS8 | CREAD | CLOCAL);
termios.c_cc[VMIN] = 1; termios.c_cc[VMIN] = 1;
termios.c_cc[VTIME] = 0; termios.c_cc[VTIME] = 0;
#ifdef __linux__
/* Support for custom baud rate for linux is implemented by setting
* a dummy baud rate of 38400 and manupulating the custom divider of
* the serial interface*/
struct serial_struct ss;
int ioret = ioctl(fd->ifd, TIOCGSERIAL, &ss);
if (ioret < 0){
avrdude_message(MSG_INFO,
"%s: Cannot get serial port settings. ioctl returned %d\n",
progname, ioret);
return -errno;
}
ss.flags = (ss.flags & ~ASYNC_SPD_MASK) | ASYNC_SPD_CUST;
ss.custom_divisor = (ss.baud_base + (speed / 2)) / speed;
unsigned int closestSpeed = ss.baud_base / ss.custom_divisor;
if (closestSpeed < speed * 98 / 100 || closestSpeed > speed * 102 / 100) { cfsetospeed(&termios, speed);
avrdude_message(MSG_INFO, cfsetispeed(&termios, speed);
"%s: Cannot set serial port speed to %d. Closest possible is %d\n",
progname, speed, closestSpeed);
return -errno;
}
ioret= ioctl(fd->ifd, TIOCSSERIAL, &ss);
if (ioret < 0){
avrdude_message(MSG_INFO,
"%s: Cannot set serial port speed to %d. ioctl returned %d\n",
progname, speed, ioret);
return -errno;
}
if (cfsetispeed(&termios, B38400) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetispeed: failed to set dummy baud\n",
progname);
return -errno;
}
if (cfsetospeed(&termios, B38400) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetospeed: failed to set dummy baud\n",
progname);
return -errno;
}
#else /* !linux */
if (cfsetospeed(&termios, speed) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetospeed: failed to set speed: %d\n",
progname, speed);
return -errno;
}
if (cfsetispeed(&termios, speed) < 0){
avrdude_message(MSG_INFO,
"%s: cfsetispeed: failed to set speed: %d\n",
progname, speed);
return -errno;
}
#endif /* linux */
rc = tcsetattr(fd->ifd, TCSANOW, &termios); rc = tcsetattr(fd->ifd, TCSANOW, &termios);
if (rc < 0) { if (rc < 0) {
avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcsetattr() failed\n", avrdude_message(MSG_INFO, "%s: ser_setspeed(): tcsetattr() failed\n",
progname); progname);
return -errno; return -errno;
} }
#ifdef __linux__
/* a bit more linux specific stuff to set custom baud rates*/
if (ioctl(fd->ifd, TIOCGSERIAL, &ss) < 0){
avrdude_message(MSG_INFO, "%s: ioctl: failed to get port settins\n", progname);
return -errno;
}
ss.flags &= ~ASYNC_SPD_MASK;
if (ioctl(fd->ifd, TIOCSSERIAL, &ss) < 0){
avrdude_message(MSG_INFO, "%s: ioctl: failed to set port settins\n", progname);
return -errno;
}
#endif
/* /*
* Everything is now set up for a local line without modem control * Everything is now set up for a local line without modem control