From 14ffb37cfd3a949e2597e9db43e5b99fe800c072 Mon Sep 17 00:00:00 2001
From: Rene Liebscher <r.liebscher@gmx.de>
Date: Sun, 1 Jun 2014 20:18:27 +0000
Subject: [PATCH] bug #42337 avrdude.conf updates for UM232H/CM232H

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1318 81a1dc3b-b13d-400b-aceb-764788c761c2
---
 ChangeLog       |  5 +++++
 avrdude.conf.in | 38 +++++++++++++++++++-------------------
 2 files changed, 24 insertions(+), 19 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index 55127f06..03cc390c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2014-06-01  Rene Liebscher <R.Liebscher@gmx.de>
+
+	bug #42337 avrdude.conf updates for UM232H/CM232H
+	* avrdude.conf.in: fixed entries as proposed
+
 2014-05-19  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
 
 	bug #41854: avrdude 6.1 does not compile on systems without libUSB
diff --git a/avrdude.conf.in b/avrdude.conf.in
index 0b8d1f45..e4285857 100644
--- a/avrdude.conf.in
+++ b/avrdude.conf.in
@@ -474,27 +474,27 @@ programmer
 # J2: Pin 7 is SCK
 #   : Pin 8 is MOSI
 #   : Pin 9 is MISO
-#	: Pin 11 is RST
+#   : Pin 11 is RST
 #   : Pin 6 is ground
 # Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
 # a 16MHz Atmega1280 to program reliably.  The 232H is conveniently 5V tolerant.
 programmer
-  id	= "UM232H";
-  desc	= "FT232H based module from FTDI and Glyn.com.au";
-  type	= "avrftdi";
+  id         = "UM232H";
+  desc       = "FT232H based module from FTDI and Glyn.com.au";
+  type       = "avrftdi";
   usbvid     = 0x0403;
 # Note: This PID is reserved for generic 232H devices and
 # should be programmed into the EEPROM
-   usbpid    = 0x6014;
-  usbdev = "A";
+  usbpid     = 0x6014;
+  usbdev     = "A";
   usbvendor  = "";
   usbproduct = "";
   usbsn      = "";
 #ISP-signals
-  sck    = 1;
-  mosi   = 2;
-  miso   = 3;
-  reset  = 4;
+  sck    = 0;
+  mosi   = 1;
+  miso   = 2;
+  reset  = 3;
 ;
 
 # C232HM module from FTDI and Glyn.com.au.
@@ -506,22 +506,22 @@ programmer
 # Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
 # a 16MHz Atmega1280 to program reliably.  The 232H is conveniently 5V tolerant.
 programmer
-  id	= "C232HM";
-  desc	= "FT232H based module from FTDI and Glyn.com.au";
-  type	= "avrftdi";
+  id         = "C232HM";
+  desc       = "FT232H based module from FTDI and Glyn.com.au";
+  type       = "avrftdi";
   usbvid     = 0x0403;
 # Note: This PID is reserved for generic 232H devices and
 # should be programmed into the EEPROM
-   usbpid    = 0x6014;
-  usbdev = "A";
+  usbpid     = 0x6014;
+  usbdev     = "A";
   usbvendor  = "";
   usbproduct = "";
   usbsn      = "";
 #ISP-signals
-  sck    = 1;
-  mosi   = 2;
-  miso   = 3;
-  reset  = 4;
+  sck    = 0;
+  mosi   = 1;
+  miso   = 2;
+  reset  = 3;
 ;