From 10a26677f85c6ce42731bccf4b83521dd534da4c Mon Sep 17 00:00:00 2001 From: troth Date: Fri, 5 Sep 2003 16:25:00 +0000 Subject: [PATCH] * ChangeLog: Format cleanups. All indents should be a single tab and lines should be less than 80 chars including 8 spaces for the tab. Date should be YYYY-MM-DD not YYYY/MM/DD. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@363 81a1dc3b-b13d-400b-aceb-764788c761c2 --- ChangeLog | 108 +++++++++++++++++++++++++++--------------------------- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/ChangeLog b/ChangeLog index 44d691a2..58f893e1 100644 --- a/ChangeLog +++ b/ChangeLog @@ -6,33 +6,33 @@ 2003-09-02 Eric B. Weddington - * doc/avrdude.texi: Add note about privileges needed to load - the giveio driver for Windows. + * doc/avrdude.texi: Add note about privileges needed to load + the giveio driver for Windows. -2003/08/29 Brian S. Dean +2003-08-29 Brian S. Dean - * avrdude.1: - * main.c: - Perform an auto erase before programming if the flash memory is - anywhere specified to be written by any of the -U requests. - - To remain backward compatible with previous versions, disable this - feature if any of the old-style memory specification operations are - specified (-i, -o). - - Implement the -D option to explicitly disable the auto erase default. - - Deprecate the old-style memory specification options (-f, -i, -I, -m, - and -o) in favor of the new -U option which allows one to operate on - multiple memories on a single command line. + * avrdude.1: + * main.c: + Perform an auto erase before programming if the flash memory is + anywhere specified to be written by any of the -U requests. + + To remain backward compatible with previous versions, disable this + feature if any of the old-style memory specification operations are + specified (-i, -o). + + Implement the -D option to explicitly disable the auto erase default. + + Deprecate the old-style memory specification options (-f, -i, -I, -m, + and -o) in favor of the new -U option which allows one to operate on + multiple memories on a single command line. 2003-08-28 Eric B. Weddington - * avr910.c: - * fileio.c: - * main.c: - * stk500.c: - More code cleanup to remove warnings. + * avr910.c: + * fileio.c: + * main.c: + * stk500.c: + More code cleanup to remove warnings. 2003-08-27 Theodore A. Roth @@ -52,7 +52,7 @@ * stk500.c: Minor code cleanup to remove warnings. -2003/08/21 Brian S. Dean +2003-08-21 Brian S. Dean * avrdude.1: * main.c: @@ -69,7 +69,7 @@ avrdude -p -e -U flash:w:main.hex:i -U eeprom:w:eeprom.hex:i -2003/08/20 Brian S. Dean +2003-08-20 Brian S. Dean * ppiwin.c: Timing related fixes for the Windows platform. Several folks have @@ -114,39 +114,39 @@ Add 'picoweb' programming cable programmer. Contributed by Rune Christensen . -2003/06/18 Brian S. Dean +2003-06-18 Brian S. Dean * avrdude.conf.in: - Add the 'sp12' (Steve Bolt's) programmer. - Submitted by Larry Barello . + Add the 'sp12' (Steve Bolt's) programmer. + Submitted by Larry Barello . -2003/06/17 Brian S. Dean +2003-06-17 Brian S. Dean * avrdude.conf.in: - Properly identify the "ALF" programmer. - - Extend ATmega8 calibration memory to support all 4 calibration bytes. - Savannah bug #3835. Submitted by Francisco T. A. Silva - . - - Add a few AVR910 programmer device codes. Savannah bug #3569 - sorry - I can't tell who submitted this to give proper credit. - - Add support for the ATtiny12. Submitted by Pontifex + Properly identify the "ALF" programmer. + + Extend ATmega8 calibration memory to support all 4 calibration bytes. + Savannah bug #3835. Submitted by Francisco T. A. Silva + . + + Add a few AVR910 programmer device codes. Savannah bug #3569 - sorry + I can't tell who submitted this to give proper credit. + + Add support for the ATtiny12. Submitted by Pontifex -2003/05/22 Brian S. Dean +2003-05-22 Brian S. Dean * avr.c: * avr.h: * fileio.c: - Optimize flash memory handling a little bit by ignoring 0xff data that - resides above the last non-0xff data value in the address space. Only - do this for flash memory since writing a 0xff to flash is a no-op. - This has the affect of creating smaller output files when dumping - memory contents from flash if the program in flash does not consume - the whole memory space. It also results in shorter programming times - when avrdude is asked to load a file into flash that has lots of 0xff - filled data past the last non-0xff data value. + Optimize flash memory handling a little bit by ignoring 0xff data that + resides above the last non-0xff data value in the address space. Only + do this for flash memory since writing a 0xff to flash is a no-op. + This has the affect of creating smaller output files when dumping + memory contents from flash if the program in flash does not consume + the whole memory space. It also results in shorter programming times + when avrdude is asked to load a file into flash that has lots of 0xff + filled data past the last non-0xff data value. 2003-05-13 Theodore A. Roth @@ -177,7 +177,7 @@ * fileio.c: Fix for bug #3293. Set correct open mode for raw format for Windows. -2003/04/19 18:41:35 bdean +2003-04-19 Brian S. Dean * avrdude.1: * fileio.c: @@ -253,14 +253,14 @@ * confwin.c: Fix bug that allows garbage for non-existent user config filename on Windows. -2003/03/29 Brian S. Dean +2003-03-29 Brian S. Dean * avrdude.conf.in: - Add the ATmega32 part. This part definition was contributed by: - Daniel Williamson and - Ruwan Jayanetti - The resulting part definition used was actually somewhat of a merge of - the two submitted definitions. + Add the ATmega32 part. This part definition was contributed by: + Daniel Williamson and + Ruwan Jayanetti + The resulting part definition used was actually somewhat of a merge of + the two submitted definitions. 2003-03-24 Theodore A. Roth