avrdude/ChangeLog

2004-07-04  Jan-Hinnerk Reichert  <hinni@despammed.com>
	* stk500.c: Fixed fosc behaviour for values exceeding
	maximum frequency (contributed by Galen Seitz)

2004-07-04  Jan-Hinnerk Reichert  <hinni@despammed.com>
	* avrdude.conf.in: Added support for
        ATtiny2313 (contributed by Bob Paddock)

2004-06-25  Joerg Wunsch <j@uriah.heep.sax.de>

	* avrdude.conf.in: Fix efuse bits for ATmega169.

2004-04-17  Jan-Hinnerk Reichert  <hinni@despammed.com>
	* avrdude.conf.in: Added support for
          - tiny13 (contributed by Pawel Moll)
          - mega48 and mega88 (contributed by Galen Seitz)
        However, the STK500-code for mega8 remains unchanged.

2004/05/19  Brian S. Dean  <bsd@bsdhome.com>

        * main.c:
        * stk500.c: Allow the baud rate to be specified on the command
	line with a new -b switch.  The specified baud rate will
	override the default serial port baud rate for a particular
	programmer.

2004/05/19  Brian S. Dean  <bsd@bsdhome.com>

	* ppi.c: Stub-out the ppi_* functions in ppi.c with empty
	wrappers that simply return an error code in order to build
	successfully on MacOS X.  This allows avrdude to work on MacOS
	X and was tested using a USB<->RS232 cable adapter,
	specifically Keyspan model USA-19HS.

2004-04-23  Joerg Wunsch <j@uriah.heep.sax.de>

	* lists.h, lists.c: Drop LISTSZ and the check for
	it in lcreat().

2004-04-17  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* avr910.c: Hopefully fixed that weird "first byte not
        programmed"-error in a good way (previous fix was not
        working with all firmwares)

2004-02-10  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* avrdude.1, doc/avrdude.texi, doc/TODO:
	Removed the deprecated options from documentation

2004-02-10  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* main.c: Removed deprecated options.

2004-01-28  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* pgm.c, main.c, avr910.c, butterfly.c, stk500.c:
	Changed default for powerup, powerdown and LED-commands
	to do nothing and return OK. Then removed these commands
	from avr910, butterfly and stk500.
	* pgm.c: Fixed wrong type for default_open introduced by
	the cleanup yesterday.


2004-01-29  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* par.c: changed order of port-read/writes in par_txrx().
	This change should increase immunity to delays in the
	programmer-hardware.
	Also did some unrelated cleanup in par_txrx().

2004-01-28  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* pgm.[ch], main.c, par.c, avr910.c, butterfly.c, stk500.c:
	Move save/restore-functionality into open/close.
	* par.c: open/close now saves/restores PPICTRL, too.
	* TODO: exitspecs don't work if RESET is in PPICTRL.

2004-01-26  Theodore A. Roth  <troth@openavr.org>

	* configure.ac (AC_INIT): Post release version update.

2004-01-26  Theodore A. Roth  <troth@openavr.org>

	* AVRDUDE 4.3.0 has been released (cvs release tag is "release_4_3_0").

2004-01-26  Theodore A. Roth  <troth@openavr.org>

	* configure.ac: Update copyright year.
	(AC_INIT): Set version to 4.3.0.

2004-01-25  Theodore A. Roth  <troth@openavr.org>

	* ChangeLog: Minor formatting cleanups.
	Move to all 2003 entries to ChangeLog-2003.
	* ChangeLog-2003: New file.
	* Makefile.am: Update copyright year.
	(EXTRA_DIST): Add ChangeLog-2003.

2004-01-17  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* doc/avrdude.texi: Get rid of those black boxes marking "overfull
	hbox".

2004-01-17  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* doc/avrdude.texi: New appendix "Troubleshooting".

2004-01-12  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* avr910.c, avrpart.c, avrpart.h, doc/TODO:
	Look up devicecode and report device.

2004-01-03  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration
	parameter baudrate to support avr910-programmers with non-standard
	baudrates.
	* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.

2004-01-03  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* avr910.c: Removed debugging stuff that is no longer needed.

2004-01-03  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* doc/TODO: Removed two items.

2004-01-03  Jan-Hinnerk Reichert  <hinni@despammed.com>

	* main.c, avr.c, avr.h, par.c, stk500.c: Add function
	avr_chip_erase() to unify handling of cycle-count.
	Makes cycle-count work for avr910-programmers.