Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
/*
|
|
|
|
|
* avrdude - A Downloader/Uploader for AVR device programmers
|
|
|
|
|
* Copyright (C) 2005 Erik Walthinsen
|
|
|
|
|
* Copyright (C) 2002-2004 Brian S. Dean <bsd@bsdhome.com>
|
2006-01-12 23:24:35 +00:00
|
|
|
* Copyright (C) 2006 David Moore
|
2006-07-16 21:30:14 +00:00
|
|
|
* Copyright (C) 2006 Joerg Wunsch <j@uriah.heep.sax.de>
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
2005-05-10 20:58:45 +00:00
|
|
|
/* $Id$ */
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
/* Based on Id: stk500.c,v 1.46 2004/12/22 01:52:45 bdean Exp */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* avrdude interface for Atmel STK500V2 programmer
|
|
|
|
|
*
|
2006-01-12 23:13:50 +00:00
|
|
|
* As the AVRISP mkII device is basically an STK500v2 one that can
|
|
|
|
|
* only talk across USB, and that misses any kind of framing protocol,
|
|
|
|
|
* this is handled here as well.
|
|
|
|
|
*
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
* Note: most commands use the "universal command" feature of the
|
|
|
|
|
* programmer in a "pass through" mode, exceptions are "program
|
|
|
|
|
* enable", "paged read", and "paged write".
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "ac_cfg.h"
|
|
|
|
|
|
|
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <errno.h>
|
2006-05-25 14:38:08 +00:00
|
|
|
#include <limits.h>
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
#include <unistd.h>
|
|
|
|
|
#include <sys/time.h>
|
|
|
|
|
#include <time.h>
|
|
|
|
|
|
|
|
|
|
#include "avr.h"
|
|
|
|
|
#include "pgm.h"
|
|
|
|
|
#include "stk500_private.h" // temp until all code converted
|
|
|
|
|
#include "stk500v2_private.h"
|
|
|
|
|
#include "serial.h"
|
2006-01-12 23:13:50 +00:00
|
|
|
#include "usbdevs.h"
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
/*
|
|
|
|
|
* We need to import enough from the JTAG ICE mkII definitions to be
|
|
|
|
|
* able to talk to the ICE, query some parameters etc. The macro
|
|
|
|
|
* JTAGMKII_PRIVATE_EXPORTED limits the amount of definitions that
|
|
|
|
|
* jtagmkII_private.h will export, so to avoid conflicts with those
|
|
|
|
|
* names that are identical to the STK500v2 ones.
|
|
|
|
|
*/
|
|
|
|
|
#include "jtagmkII.h" // public interfaces from jtagmkII.c
|
|
|
|
|
#define JTAGMKII_PRIVATE_EXPORTED
|
|
|
|
|
#include "jtagmkII_private.h"
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
#define STK500V2_XTAL 7372800U
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
#define DEBUG(format,args...) fprintf(stderr, format, ## args)
|
|
|
|
|
#else
|
|
|
|
|
#define DEBUG(format,args...)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
#define DEBUGRECV(format,args...) fprintf(stderr, format, ## args)
|
|
|
|
|
#else
|
|
|
|
|
#define DEBUGRECV(format,args...)
|
|
|
|
|
#endif
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
enum hvmode
|
|
|
|
|
{
|
|
|
|
|
PPMODE, HVSPMODE
|
|
|
|
|
};
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
extern int verbose;
|
|
|
|
|
extern char * progname;
|
|
|
|
|
extern int do_cycles;
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
/*
|
|
|
|
|
* See stk500pp_read_byte() for an explanation of the flash and
|
|
|
|
|
* EEPROM page caches.
|
|
|
|
|
*/
|
|
|
|
|
static unsigned char *flash_pagecache;
|
|
|
|
|
static unsigned long flash_pageaddr;
|
|
|
|
|
static unsigned int flash_pagesize;
|
|
|
|
|
|
|
|
|
|
static unsigned char *eeprom_pagecache;
|
|
|
|
|
static unsigned long eeprom_pageaddr;
|
|
|
|
|
static unsigned int eeprom_pagesize;
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static unsigned char command_sequence = 1;
|
|
|
|
|
|
2006-08-18 21:23:34 +00:00
|
|
|
static enum
|
|
|
|
|
{
|
|
|
|
|
PGMTYPE_UNKNOWN,
|
|
|
|
|
PGMTYPE_STK500,
|
|
|
|
|
PGMTYPE_AVRISP,
|
|
|
|
|
PGMTYPE_AVRISP_MKII,
|
2006-09-06 20:06:07 +00:00
|
|
|
PGMTYPE_JTAGICE_MKII,
|
2006-08-18 21:23:34 +00:00
|
|
|
}
|
|
|
|
|
pgmtype;
|
|
|
|
|
|
|
|
|
|
static const char *pgmname[] =
|
|
|
|
|
{
|
|
|
|
|
"unknown",
|
|
|
|
|
"STK500",
|
|
|
|
|
"AVRISP",
|
|
|
|
|
"AVRISP mkII",
|
2006-09-06 20:06:07 +00:00
|
|
|
"JTAG ICE mkII",
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct jtagispentry
|
|
|
|
|
{
|
|
|
|
|
unsigned char cmd;
|
|
|
|
|
unsigned short size;
|
|
|
|
|
#define SZ_READ_FLASH_EE USHRT_MAX
|
|
|
|
|
#define SZ_SPI_MULTI (USHRT_MAX - 1)
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct jtagispentry jtagispcmds[] = {
|
2006-11-01 21:47:25 +00:00
|
|
|
/* generic */
|
2006-09-06 20:06:07 +00:00
|
|
|
{ CMD_SET_PARAMETER, 2 },
|
|
|
|
|
{ CMD_GET_PARAMETER, 3 },
|
|
|
|
|
{ CMD_OSCCAL, 2 },
|
|
|
|
|
{ CMD_LOAD_ADDRESS, 2 },
|
2006-11-01 21:47:25 +00:00
|
|
|
/* ISP mode */
|
2006-09-06 20:06:07 +00:00
|
|
|
{ CMD_ENTER_PROGMODE_ISP, 2 },
|
|
|
|
|
{ CMD_LEAVE_PROGMODE_ISP, 2 },
|
|
|
|
|
{ CMD_CHIP_ERASE_ISP, 2 },
|
|
|
|
|
{ CMD_PROGRAM_FLASH_ISP, 2 },
|
|
|
|
|
{ CMD_READ_FLASH_ISP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_EEPROM_ISP, 2 },
|
|
|
|
|
{ CMD_READ_EEPROM_ISP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_FUSE_ISP, 3 },
|
|
|
|
|
{ CMD_READ_FUSE_ISP, 4 },
|
|
|
|
|
{ CMD_PROGRAM_LOCK_ISP, 3 },
|
|
|
|
|
{ CMD_READ_LOCK_ISP, 4 },
|
|
|
|
|
{ CMD_READ_SIGNATURE_ISP, 4 },
|
|
|
|
|
{ CMD_READ_OSCCAL_ISP, 4 },
|
2006-11-01 21:47:25 +00:00
|
|
|
{ CMD_SPI_MULTI, SZ_SPI_MULTI },
|
|
|
|
|
/* all HV modes */
|
|
|
|
|
{ CMD_SET_CONTROL_STACK, 2 },
|
|
|
|
|
/* HVSP mode */
|
|
|
|
|
{ CMD_ENTER_PROGMODE_HVSP, 2 },
|
|
|
|
|
{ CMD_LEAVE_PROGMODE_HVSP, 2 },
|
|
|
|
|
{ CMD_CHIP_ERASE_HVSP, 2 },
|
|
|
|
|
{ CMD_PROGRAM_FLASH_HVSP, 2 },
|
|
|
|
|
{ CMD_READ_FLASH_HVSP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_EEPROM_HVSP, 2 },
|
|
|
|
|
{ CMD_READ_EEPROM_HVSP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_FUSE_HVSP, 2 },
|
|
|
|
|
{ CMD_READ_FUSE_HVSP, 3 },
|
|
|
|
|
{ CMD_PROGRAM_LOCK_HVSP, 2 },
|
|
|
|
|
{ CMD_READ_LOCK_HVSP, 3 },
|
|
|
|
|
{ CMD_READ_SIGNATURE_HVSP, 3 },
|
|
|
|
|
{ CMD_READ_OSCCAL_HVSP, 3 },
|
|
|
|
|
/* PP mode */
|
|
|
|
|
{ CMD_ENTER_PROGMODE_PP, 2 },
|
|
|
|
|
{ CMD_LEAVE_PROGMODE_PP, 2 },
|
|
|
|
|
{ CMD_CHIP_ERASE_PP, 2 },
|
|
|
|
|
{ CMD_PROGRAM_FLASH_PP, 2 },
|
|
|
|
|
{ CMD_READ_FLASH_PP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_EEPROM_PP, 2 },
|
|
|
|
|
{ CMD_READ_EEPROM_PP, SZ_READ_FLASH_EE },
|
|
|
|
|
{ CMD_PROGRAM_FUSE_PP, 2 },
|
|
|
|
|
{ CMD_READ_FUSE_PP, 3 },
|
|
|
|
|
{ CMD_PROGRAM_LOCK_PP, 2 },
|
|
|
|
|
{ CMD_READ_LOCK_PP, 3 },
|
|
|
|
|
{ CMD_READ_SIGNATURE_PP, 3 },
|
|
|
|
|
{ CMD_READ_OSCCAL_PP, 3 },
|
2006-08-18 21:23:34 +00:00
|
|
|
};
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
static int stk500v2_getparm(PROGRAMMER * pgm, unsigned char parm, unsigned char * value);
|
|
|
|
|
static int stk500v2_setparm(PROGRAMMER * pgm, unsigned char parm, unsigned char value);
|
|
|
|
|
static void stk500v2_print_parms1(PROGRAMMER * pgm, char * p);
|
|
|
|
|
static int stk500v2_is_page_empty(unsigned int address, int page_size,
|
|
|
|
|
const unsigned char *buf);
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
static unsigned int stk500v2_mode_for_pagesize(unsigned int pagesize);
|
2006-01-12 23:13:50 +00:00
|
|
|
|
2006-07-19 21:19:42 +00:00
|
|
|
static int stk500v2_set_sck_period_mk2(PROGRAMMER * pgm, double v);
|
2006-09-06 20:06:07 +00:00
|
|
|
|
|
|
|
|
static unsigned short
|
|
|
|
|
b2_to_u16(unsigned char *b)
|
|
|
|
|
{
|
|
|
|
|
unsigned short l;
|
|
|
|
|
l = b[0];
|
|
|
|
|
l += (unsigned)b[1] << 8;
|
|
|
|
|
|
|
|
|
|
return l;
|
|
|
|
|
}
|
2006-07-19 21:19:42 +00:00
|
|
|
|
2006-01-12 23:13:50 +00:00
|
|
|
static int stk500v2_send_mk2(PROGRAMMER * pgm, unsigned char * data, size_t len)
|
|
|
|
|
{
|
2006-12-11 12:47:35 +00:00
|
|
|
if (serial_send(&pgm->fd, data, len) != 0) {
|
2006-01-12 23:13:50 +00:00
|
|
|
fprintf(stderr,"%s: stk500_send_mk2(): failed to send command to serial port\n",progname);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
static unsigned short get_jtagisp_return_size(unsigned char cmd)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof jtagispcmds / sizeof jtagispcmds[0]; i++)
|
|
|
|
|
if (jtagispcmds[i].cmd == cmd)
|
|
|
|
|
return jtagispcmds[i].size;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Send the data as a JTAG ICE mkII encapsulated ISP packet.
|
|
|
|
|
* Unlike what AVR067 says, the packet gets a length of our
|
|
|
|
|
* response buffer prepended, and replies with RSP_SPI_DATA
|
|
|
|
|
* if successful.
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_jtagmkII_send(PROGRAMMER * pgm, unsigned char * data, size_t len)
|
|
|
|
|
{
|
|
|
|
|
unsigned char *cmdbuf;
|
|
|
|
|
int rv;
|
|
|
|
|
unsigned short sz;
|
|
|
|
|
|
|
|
|
|
sz = get_jtagisp_return_size(data[0]);
|
|
|
|
|
if (sz == 0) {
|
|
|
|
|
fprintf(stderr, "%s: unsupported encapsulated ISP command: %#x\n",
|
|
|
|
|
progname, data[0]);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
if (sz == SZ_READ_FLASH_EE) {
|
|
|
|
|
/*
|
|
|
|
|
* For CMND_READ_FLASH_ISP and CMND_READ_EEPROM_ISP, extract the
|
|
|
|
|
* size of the return data from the request. Note that the
|
|
|
|
|
* request itself has the size in big endian format, while we are
|
|
|
|
|
* supposed to deliver it in little endian.
|
|
|
|
|
*/
|
|
|
|
|
sz = 3 + (data[1] << 8) + data[2];
|
|
|
|
|
} else if (sz == SZ_SPI_MULTI) {
|
|
|
|
|
/*
|
|
|
|
|
* CMND_SPI_MULTI has the Rx size encoded in its 3rd byte.
|
|
|
|
|
*/
|
|
|
|
|
sz = 3 + data[2];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((cmdbuf = malloc(len + 3)) == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: out of memory for command packet\n",
|
|
|
|
|
progname);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
cmdbuf[0] = CMND_ISP_PACKET;
|
|
|
|
|
cmdbuf[1] = sz & 0xff;
|
|
|
|
|
cmdbuf[2] = (sz >> 8) & 0xff;
|
|
|
|
|
memcpy(cmdbuf + 3, data, len);
|
|
|
|
|
rv = jtagmkII_send(pgm, cmdbuf, len + 3);
|
|
|
|
|
free(cmdbuf);
|
|
|
|
|
|
|
|
|
|
return rv;
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static int stk500v2_send(PROGRAMMER * pgm, unsigned char * data, size_t len)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[275 + 6]; // max MESSAGE_BODY of 275 bytes, 6 bytes overhead
|
|
|
|
|
int i;
|
|
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype == PGMTYPE_AVRISP_MKII)
|
2006-01-12 23:13:50 +00:00
|
|
|
return stk500v2_send_mk2(pgm, data, len);
|
2006-09-06 20:06:07 +00:00
|
|
|
else if (pgmtype == PGMTYPE_JTAGICE_MKII)
|
|
|
|
|
return stk500v2_jtagmkII_send(pgm, data, len);
|
2006-01-12 23:13:50 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
buf[0] = MESSAGE_START;
|
|
|
|
|
buf[1] = command_sequence;
|
|
|
|
|
buf[2] = len / 256;
|
|
|
|
|
buf[3] = len % 256;
|
|
|
|
|
buf[4] = TOKEN;
|
|
|
|
|
memcpy(buf+5, data, len);
|
|
|
|
|
|
|
|
|
|
// calculate the XOR checksum
|
|
|
|
|
buf[5+len] = 0;
|
|
|
|
|
for (i=0;i<5+len;i++)
|
|
|
|
|
buf[5+len] ^= buf[i];
|
|
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_send(");
|
|
|
|
|
for (i=0;i<len+6;i++) DEBUG("0x%02x ",buf[i]);
|
|
|
|
|
DEBUG(", %d)\n",len+6);
|
|
|
|
|
|
2006-12-11 12:47:35 +00:00
|
|
|
if (serial_send(&pgm->fd, buf, len+6) != 0) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
fprintf(stderr,"%s: stk500_send(): failed to send command to serial port\n",progname);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_drain(PROGRAMMER * pgm, int display)
|
|
|
|
|
{
|
2006-12-11 12:47:35 +00:00
|
|
|
return serial_drain(&pgm->fd, display);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
2006-01-12 23:13:50 +00:00
|
|
|
static int stk500v2_recv_mk2(PROGRAMMER * pgm, unsigned char msg[],
|
|
|
|
|
size_t maxsize)
|
|
|
|
|
{
|
|
|
|
|
int rv;
|
|
|
|
|
|
2006-12-11 12:47:35 +00:00
|
|
|
rv = serial_recv(&pgm->fd, msg, maxsize);
|
2006-01-12 23:13:50 +00:00
|
|
|
if (rv < 0) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_recv_mk2: error in USB receive\n", progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return rv;
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
static int stk500v2_jtagmkII_recv(PROGRAMMER * pgm, unsigned char msg[],
|
|
|
|
|
size_t maxsize)
|
|
|
|
|
{
|
|
|
|
|
int rv;
|
|
|
|
|
unsigned char *jtagmsg;
|
|
|
|
|
|
|
|
|
|
rv = jtagmkII_recv(pgm, &jtagmsg);
|
|
|
|
|
if (rv <= 0) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_jtagmkII_recv(): error in jtagmkII_recv()\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
2006-09-06 22:29:27 +00:00
|
|
|
if (rv - 1 > maxsize) {
|
2006-09-06 20:06:07 +00:00
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_jtagmkII_recv(): got %u bytes, have only room for %u bytes\n",
|
2006-12-11 15:33:19 +00:00
|
|
|
progname, (unsigned)rv - 1, (unsigned)maxsize);
|
2006-09-06 20:06:07 +00:00
|
|
|
rv = maxsize;
|
|
|
|
|
}
|
|
|
|
|
switch (jtagmsg[0]) {
|
|
|
|
|
case RSP_SPI_DATA:
|
|
|
|
|
break;
|
|
|
|
|
case RSP_FAILED:
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_jtagmkII_recv(): failed\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
case RSP_ILLEGAL_MCU_STATE:
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_jtagmkII_recv(): illegal MCU state\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
default:
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_jtagmkII_recv(): unknown status %d\n",
|
|
|
|
|
progname, jtagmsg[0]);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
memcpy(msg, jtagmsg + 1, rv - 1);
|
2006-10-09 14:34:24 +00:00
|
|
|
return rv;
|
2006-09-06 20:06:07 +00:00
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static int stk500v2_recv(PROGRAMMER * pgm, unsigned char msg[], size_t maxsize) {
|
|
|
|
|
enum states { sINIT, sSTART, sSEQNUM, sSIZE1, sSIZE2, sTOKEN, sDATA, sCSUM, sDONE } state = sSTART;
|
|
|
|
|
int msglen = 0;
|
|
|
|
|
int curlen = 0;
|
|
|
|
|
int timeout = 0;
|
|
|
|
|
unsigned char c, checksum = 0;
|
|
|
|
|
|
|
|
|
|
long timeoutval = 5; // seconds
|
|
|
|
|
struct timeval tv;
|
|
|
|
|
double tstart, tnow;
|
|
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype == PGMTYPE_AVRISP_MKII)
|
2006-01-12 23:13:50 +00:00
|
|
|
return stk500v2_recv_mk2(pgm, msg, maxsize);
|
2006-09-06 20:06:07 +00:00
|
|
|
else if (pgmtype == PGMTYPE_JTAGICE_MKII)
|
|
|
|
|
return stk500v2_jtagmkII_recv(pgm, msg, maxsize);
|
2006-01-12 23:13:50 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
DEBUG("STK500V2: stk500v2_recv(): ");
|
|
|
|
|
|
|
|
|
|
gettimeofday(&tv, NULL);
|
|
|
|
|
tstart = tv.tv_sec;
|
|
|
|
|
|
|
|
|
|
while ( (state != sDONE ) && (!timeout) ) {
|
2006-12-11 12:47:35 +00:00
|
|
|
if (serial_recv(&pgm->fd, &c, 1) < 0)
|
2005-05-11 17:09:22 +00:00
|
|
|
goto timedout;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
DEBUG("0x%02x ",c);
|
|
|
|
|
checksum ^= c;
|
|
|
|
|
|
|
|
|
|
switch (state) {
|
|
|
|
|
case sSTART:
|
|
|
|
|
DEBUGRECV("hoping for start token...");
|
|
|
|
|
if (c == MESSAGE_START) {
|
|
|
|
|
DEBUGRECV("got it\n");
|
|
|
|
|
checksum = MESSAGE_START;
|
|
|
|
|
state = sSEQNUM;
|
|
|
|
|
} else
|
|
|
|
|
DEBUGRECV("sorry\n");
|
|
|
|
|
break;
|
|
|
|
|
case sSEQNUM:
|
|
|
|
|
DEBUGRECV("hoping for sequence...\n");
|
|
|
|
|
if (c == command_sequence) {
|
|
|
|
|
DEBUGRECV("got it, incrementing\n");
|
|
|
|
|
state = sSIZE1;
|
|
|
|
|
command_sequence++;
|
|
|
|
|
} else {
|
|
|
|
|
DEBUGRECV("sorry\n");
|
|
|
|
|
state = sSTART;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case sSIZE1:
|
|
|
|
|
DEBUGRECV("hoping for size LSB\n");
|
|
|
|
|
msglen = c*256;
|
|
|
|
|
state = sSIZE2;
|
|
|
|
|
break;
|
|
|
|
|
case sSIZE2:
|
|
|
|
|
DEBUGRECV("hoping for size MSB...");
|
|
|
|
|
msglen += c;
|
|
|
|
|
DEBUG(" msg is %d bytes\n",msglen);
|
|
|
|
|
state = sTOKEN;
|
|
|
|
|
break;
|
|
|
|
|
case sTOKEN:
|
|
|
|
|
if (c == TOKEN) state = sDATA;
|
|
|
|
|
else state = sSTART;
|
|
|
|
|
break;
|
|
|
|
|
case sDATA:
|
|
|
|
|
if (curlen < maxsize) {
|
|
|
|
|
msg[curlen] = c;
|
|
|
|
|
} else {
|
2005-08-30 01:30:05 +00:00
|
|
|
fprintf(stderr, "%s: stk500v2_recv(): buffer too small, received %d byte into %zd byte buffer\n",
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
progname,curlen,maxsize);
|
|
|
|
|
return -2;
|
|
|
|
|
}
|
|
|
|
|
if ((curlen == 0) && (msg[0] == ANSWER_CKSUM_ERROR)) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_recv(): previous packet sent with wrong checksum\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -3;
|
|
|
|
|
}
|
|
|
|
|
curlen++;
|
|
|
|
|
if (curlen == msglen) state = sCSUM;
|
|
|
|
|
break;
|
|
|
|
|
case sCSUM:
|
|
|
|
|
if (checksum == 0) {
|
|
|
|
|
state = sDONE;
|
|
|
|
|
} else {
|
|
|
|
|
state = sSTART;
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_recv(): checksum error\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -4;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_recv(): unknown state\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -5;
|
|
|
|
|
} /* switch */
|
|
|
|
|
|
|
|
|
|
gettimeofday(&tv, NULL);
|
|
|
|
|
tnow = tv.tv_sec;
|
|
|
|
|
if (tnow-tstart > timeoutval) { // wuff - signed/unsigned/overflow
|
2005-05-11 17:09:22 +00:00
|
|
|
timedout:
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
fprintf(stderr, "%s: stk500_2_ReceiveMessage(): timeout\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
} /* while */
|
|
|
|
|
DEBUG("\n");
|
|
|
|
|
|
|
|
|
|
return msglen+6;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_getsync(PROGRAMMER * pgm) {
|
|
|
|
|
int tries = 0;
|
|
|
|
|
unsigned char buf[1], resp[32];
|
|
|
|
|
int status;
|
|
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_getsync()\n");
|
|
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype == PGMTYPE_JTAGICE_MKII)
|
|
|
|
|
return 0;
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
retry:
|
|
|
|
|
tries++;
|
|
|
|
|
|
|
|
|
|
// send the sync command and see if we can get there
|
|
|
|
|
buf[0] = CMD_SIGN_ON;
|
|
|
|
|
stk500v2_send(pgm, buf, 1);
|
|
|
|
|
|
|
|
|
|
// try to get the response back and see where we got
|
|
|
|
|
status = stk500v2_recv(pgm, resp, sizeof(resp));
|
|
|
|
|
|
|
|
|
|
// if we got bytes returned, check to see what came back
|
|
|
|
|
if (status > 0) {
|
2006-08-18 21:23:34 +00:00
|
|
|
if ((resp[0] == CMD_SIGN_ON) && (resp[1] == STATUS_CMD_OK) &&
|
|
|
|
|
(status > 3)) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
// success!
|
2006-08-18 21:23:34 +00:00
|
|
|
unsigned int siglen = resp[2];
|
|
|
|
|
if (siglen >= strlen("STK500_2") &&
|
|
|
|
|
memcmp(resp + 3, "STK500_2", strlen("STK500_2")) == 0) {
|
|
|
|
|
pgmtype = PGMTYPE_STK500;
|
|
|
|
|
} else if (siglen >= strlen("AVRISP_2") &&
|
|
|
|
|
memcmp(resp + 3, "AVRISP_2", strlen("AVRISP_2")) == 0) {
|
|
|
|
|
pgmtype = PGMTYPE_AVRISP;
|
|
|
|
|
} else if (siglen >= strlen("AVRISP_MK2") &&
|
|
|
|
|
memcmp(resp + 3, "AVRISP_MK2", strlen("AVRISP_MK2")) == 0) {
|
|
|
|
|
pgmtype = PGMTYPE_AVRISP_MKII;
|
|
|
|
|
} else {
|
|
|
|
|
resp[siglen + 3] = 0;
|
|
|
|
|
if (verbose)
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_getsync(): got response from unknown "
|
|
|
|
|
"programmer %s, assuming STK500\n",
|
|
|
|
|
progname, resp + 3);
|
|
|
|
|
pgmtype = PGMTYPE_STK500;
|
|
|
|
|
}
|
2006-08-19 21:02:45 +00:00
|
|
|
if (verbose >= 3)
|
2006-08-18 21:23:34 +00:00
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_getsync(): found %s programmer\n",
|
|
|
|
|
progname, pgmname[pgmtype]);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return 0;
|
|
|
|
|
} else {
|
|
|
|
|
if (tries > 33) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_getsync(): can't communicate with device: resp=0x%02x\n",
|
|
|
|
|
progname, resp[0]);
|
|
|
|
|
return -6;
|
|
|
|
|
} else
|
|
|
|
|
goto retry;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// or if we got a timeout
|
|
|
|
|
} else if (status == -1) {
|
|
|
|
|
if (tries > 33) {
|
|
|
|
|
fprintf(stderr,"%s: stk500v2_getsync(): timeout communicating with programmer\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
} else
|
|
|
|
|
goto retry;
|
|
|
|
|
|
|
|
|
|
// or any other error
|
|
|
|
|
} else {
|
|
|
|
|
if (tries > 33) {
|
|
|
|
|
fprintf(stderr,"%s: stk500v2_getsync(): error communicating with programmer: (%d)\n",
|
|
|
|
|
progname,status);
|
|
|
|
|
} else
|
|
|
|
|
goto retry;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
static int stk500v2_command(PROGRAMMER * pgm, unsigned char * buf,
|
|
|
|
|
size_t len, size_t maxlen) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
int i;
|
|
|
|
|
int tries = 0;
|
|
|
|
|
int status;
|
|
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_command(");
|
|
|
|
|
for (i=0;i<len;i++) DEBUG("0x%02hhx ",buf[i]);
|
|
|
|
|
DEBUG(", %d)\n",len);
|
|
|
|
|
|
|
|
|
|
retry:
|
|
|
|
|
tries++;
|
|
|
|
|
|
|
|
|
|
// send the command to the programmer
|
|
|
|
|
stk500v2_send(pgm,buf,len);
|
|
|
|
|
// attempt to read the status back
|
|
|
|
|
status = stk500v2_recv(pgm,buf,maxlen);
|
|
|
|
|
|
|
|
|
|
// if we got a successful readback, return
|
|
|
|
|
if (status > 0) {
|
|
|
|
|
DEBUG(" = %d\n",status);
|
2006-10-09 14:34:24 +00:00
|
|
|
if (status < 2) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_command(): short reply\n", progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
if (buf[1] == STATUS_CMD_OK)
|
|
|
|
|
return status;
|
|
|
|
|
if (buf[1] == STATUS_CMD_FAILED)
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_command(): command failed\n", progname);
|
|
|
|
|
else
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_command(): unknown status 0x%02x\n",
|
|
|
|
|
progname, buf[1]);
|
|
|
|
|
return -1;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// otherwise try to sync up again
|
|
|
|
|
status = stk500v2_getsync(pgm);
|
|
|
|
|
if (status != 0) {
|
|
|
|
|
if (tries > 33) {
|
|
|
|
|
fprintf(stderr,"%s: stk500v2_command(): failed miserably to execute command 0x%02x\n",
|
|
|
|
|
progname,buf[0]);
|
|
|
|
|
return -1;
|
|
|
|
|
} else
|
|
|
|
|
goto retry;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
DEBUG(" = 0\n");
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int stk500v2_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
|
|
|
|
|
unsigned char res[4])
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[8];
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_cmd(%02x,%02x,%02x,%02x)\n",cmd[0],cmd[1],cmd[2],cmd[3]);
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_SPI_MULTI;
|
|
|
|
|
buf[1] = 4;
|
|
|
|
|
buf[2] = 4;
|
|
|
|
|
buf[3] = 0;
|
|
|
|
|
buf[4] = cmd[0];
|
|
|
|
|
buf[5] = cmd[1];
|
|
|
|
|
buf[6] = cmd[2];
|
|
|
|
|
buf[7] = cmd[3];
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm, buf, 8, sizeof(buf));
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
fprintf(stderr, "%s: stk500v2_cmd(): failed to send command\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
2006-10-09 14:34:24 +00:00
|
|
|
} else if (result < 6) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_cmd(): short reply, len = %d\n",
|
|
|
|
|
progname, result);
|
|
|
|
|
return -1;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
res[0] = buf[2];
|
|
|
|
|
res[1] = buf[3];
|
|
|
|
|
res[2] = buf[4];
|
|
|
|
|
res[3] = buf[5];
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* issue the 'chip erase' command to the AVR device
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_chip_erase(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
int result;
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
|
|
|
|
|
if (p->op[AVR_OP_CHIP_ERASE] == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_chip_erase: chip erase instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pgm->pgm_led(pgm, ON);
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_CHIP_ERASE_ISP;
|
|
|
|
|
buf[1] = p->chip_erase_delay / 1000;
|
|
|
|
|
buf[2] = 0; // use delay (?)
|
|
|
|
|
avr_set_bits(p->op[AVR_OP_CHIP_ERASE], buf+3);
|
|
|
|
|
result = stk500v2_command(pgm, buf, 7, sizeof(buf));
|
|
|
|
|
usleep(p->chip_erase_delay);
|
|
|
|
|
pgm->initialize(pgm, p);
|
|
|
|
|
|
|
|
|
|
pgm->pgm_led(pgm, OFF);
|
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
/*
|
2006-07-21 21:53:49 +00:00
|
|
|
* issue the 'chip erase' command to the AVR device, generic HV mode
|
2006-07-16 21:30:14 +00:00
|
|
|
*/
|
2006-07-21 21:53:49 +00:00
|
|
|
static int stk500hv_chip_erase(PROGRAMMER * pgm, AVRPART * p, enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
int result;
|
|
|
|
|
unsigned char buf[3];
|
|
|
|
|
|
|
|
|
|
pgm->pgm_led(pgm, ON);
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
if (mode == PPMODE) {
|
|
|
|
|
buf[0] = CMD_CHIP_ERASE_PP;
|
|
|
|
|
buf[1] = p->chiperasepulsewidth;
|
|
|
|
|
buf[2] = p->chiperasepolltimeout;
|
|
|
|
|
} else {
|
|
|
|
|
buf[0] = CMD_CHIP_ERASE_HVSP;
|
2006-08-17 16:01:34 +00:00
|
|
|
buf[1] = p->chiperasepolltimeout;
|
|
|
|
|
buf[2] = p->chiperasetime;
|
2006-07-21 21:53:49 +00:00
|
|
|
}
|
2006-07-16 21:30:14 +00:00
|
|
|
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
|
|
|
|
|
usleep(p->chip_erase_delay);
|
|
|
|
|
pgm->initialize(pgm, p);
|
|
|
|
|
|
|
|
|
|
pgm->pgm_led(pgm, OFF);
|
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* issue the 'chip erase' command to the AVR device, parallel mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_chip_erase(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_chip_erase(pgm, p, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* issue the 'chip erase' command to the AVR device, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_chip_erase(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_chip_erase(pgm, p, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
/*
|
|
|
|
|
* issue the 'program enable' command to the AVR device
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_program_enable(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
|
|
|
|
|
if (p->op[AVR_OP_PGM_ENABLE] == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_program_enable(): program enable instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_ENTER_PROGMODE_ISP;
|
|
|
|
|
buf[1] = p->timeout;
|
|
|
|
|
buf[2] = p->stabdelay;
|
|
|
|
|
buf[3] = p->cmdexedelay;
|
2006-08-09 19:56:48 +00:00
|
|
|
buf[4] = p->synchloops;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
buf[5] = p->bytedelay;
|
|
|
|
|
buf[6] = p->pollvalue;
|
|
|
|
|
buf[7] = p->pollindex;
|
|
|
|
|
avr_set_bits(p->op[AVR_OP_PGM_ENABLE], buf+8);
|
|
|
|
|
|
|
|
|
|
return stk500v2_command(pgm, buf, 12, sizeof(buf));
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
/*
|
|
|
|
|
* issue the 'program enable' command to the AVR device, parallel mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_program_enable(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_ENTER_PROGMODE_PP;
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[1] = p->hventerstabdelay;
|
2006-07-16 21:30:14 +00:00
|
|
|
buf[2] = p->progmodedelay;
|
|
|
|
|
buf[3] = p->latchcycles;
|
|
|
|
|
buf[4] = p->togglevtg;
|
|
|
|
|
buf[5] = p->poweroffdelay;
|
|
|
|
|
buf[6] = p->resetdelayms;
|
|
|
|
|
buf[7] = p->resetdelayus;
|
|
|
|
|
|
|
|
|
|
return stk500v2_command(pgm, buf, 8, sizeof(buf));
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* issue the 'program enable' command to the AVR device, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_program_enable(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_ENTER_PROGMODE_HVSP;
|
|
|
|
|
buf[1] = p->hventerstabdelay;
|
|
|
|
|
buf[2] = p->hvspcmdexedelay;
|
|
|
|
|
buf[3] = p->synchcycles;
|
|
|
|
|
buf[4] = p->latchcycles;
|
|
|
|
|
buf[5] = p->togglevtg;
|
|
|
|
|
buf[6] = p->poweroffdelay;
|
|
|
|
|
buf[7] = p->resetdelayms;
|
|
|
|
|
buf[8] = p->resetdelayus;
|
|
|
|
|
|
|
|
|
|
return stk500v2_command(pgm, buf, 9, sizeof(buf));
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* initialize the AVR device and prepare it to accept commands
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_initialize(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
2006-08-18 21:23:34 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return pgm->program_enable(pgm, p);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
/*
|
2006-07-21 21:53:49 +00:00
|
|
|
* initialize the AVR device and prepare it to accept commands, generic HV mode
|
2006-07-16 21:30:14 +00:00
|
|
|
*/
|
2006-07-21 21:53:49 +00:00
|
|
|
static int stk500hv_initialize(PROGRAMMER * pgm, AVRPART * p, enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
unsigned char buf[CTL_STACK_SIZE + 1];
|
|
|
|
|
int result;
|
|
|
|
|
LNODEID ln;
|
|
|
|
|
AVRMEM * m;
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
if (p->ctl_stack_type != (mode == PPMODE? CTL_STACK_PP: CTL_STACK_HVSP)) {
|
2006-07-16 21:30:14 +00:00
|
|
|
fprintf(stderr,
|
2006-07-21 21:53:49 +00:00
|
|
|
"%s: stk500hv_initialize(): "
|
|
|
|
|
"%s programming control stack not defined for part \"%s\"\n",
|
|
|
|
|
progname,
|
|
|
|
|
(mode == PPMODE? "parallel": "high-voltage serial"),
|
|
|
|
|
p->desc);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_SET_CONTROL_STACK;
|
|
|
|
|
memcpy(buf + 1, p->controlstack, CTL_STACK_SIZE);
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm, buf, CTL_STACK_SIZE + 1, sizeof(buf));
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
2006-07-16 21:30:14 +00:00
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500pp_initalize(): "
|
2006-10-09 14:34:24 +00:00
|
|
|
"failed to set control stack\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Examine the avrpart's memory definitions, and initialize the page
|
|
|
|
|
* caches. For devices/memory that are not page oriented, treat
|
|
|
|
|
* them as page size 1 for EEPROM, and 2 for flash.
|
|
|
|
|
*/
|
|
|
|
|
flash_pagesize = 2;
|
|
|
|
|
eeprom_pagesize = 1;
|
|
|
|
|
for (ln = lfirst(p->mem); ln; ln = lnext(ln)) {
|
|
|
|
|
m = ldata(ln);
|
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
2006-07-19 21:25:08 +00:00
|
|
|
if (m->page_size > 0)
|
|
|
|
|
flash_pagesize = m->page_size;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(m->desc, "eeprom") == 0) {
|
2006-07-19 21:25:08 +00:00
|
|
|
if (m->page_size > 0)
|
|
|
|
|
eeprom_pagesize = m->page_size;
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
free(flash_pagecache);
|
|
|
|
|
free(eeprom_pagecache);
|
|
|
|
|
if ((flash_pagecache = malloc(flash_pagesize)) == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500pp_initialize(): Out of memory\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
if ((eeprom_pagecache = malloc(eeprom_pagesize)) == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500pp_initialize(): Out of memory\n",
|
|
|
|
|
progname);
|
|
|
|
|
free(flash_pagecache);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
flash_pageaddr = eeprom_pageaddr = (unsigned long)-1L;
|
|
|
|
|
|
|
|
|
|
return pgm->program_enable(pgm, p);
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* initialize the AVR device and prepare it to accept commands, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_initialize(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_initialize(pgm, p, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* initialize the AVR device and prepare it to accept commands, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_initialize(PROGRAMMER * pgm, AVRPART * p)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_initialize(pgm, p, HVSPMODE);
|
|
|
|
|
}
|
2006-07-16 21:30:14 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static void stk500v2_disable(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_LEAVE_PROGMODE_ISP;
|
|
|
|
|
buf[1] = 1; // preDelay;
|
|
|
|
|
buf[2] = 1; // postDelay;
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_disable(): failed to leave programming mode\n",
|
|
|
|
|
progname);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Leave programming mode, generic HV mode
|
|
|
|
|
*/
|
|
|
|
|
static void stk500hv_disable(PROGRAMMER * pgm, enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
free(flash_pagecache);
|
|
|
|
|
flash_pagecache = NULL;
|
|
|
|
|
free(eeprom_pagecache);
|
|
|
|
|
eeprom_pagecache = NULL;
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_LEAVE_PROGMODE_PP: CMD_LEAVE_PROGMODE_HVSP;
|
|
|
|
|
buf[1] = 15; // p->hvleavestabdelay;
|
2006-07-16 21:30:14 +00:00
|
|
|
buf[2] = 15; // p->resetdelay;
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
2006-07-16 21:30:14 +00:00
|
|
|
fprintf(stderr,
|
2006-07-21 21:53:49 +00:00
|
|
|
"%s: stk500hv_disable(): "
|
2006-10-09 14:34:24 +00:00
|
|
|
"failed to leave programming mode\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Leave programming mode, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static void stk500pp_disable(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
stk500hv_disable(pgm, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Leave programming mode, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static void stk500hvsp_disable(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
stk500hv_disable(pgm, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static void stk500v2_enable(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_open(PROGRAMMER * pgm, char * port)
|
|
|
|
|
{
|
2006-01-12 23:13:50 +00:00
|
|
|
long baud = 115200;
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
DEBUG("STK500V2: stk500v2_open()\n");
|
|
|
|
|
|
|
|
|
|
if (pgm->baudrate)
|
2006-01-12 23:13:50 +00:00
|
|
|
baud = pgm->baudrate;
|
|
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
pgmtype = PGMTYPE_UNKNOWN;
|
|
|
|
|
|
2006-01-12 23:13:50 +00:00
|
|
|
/*
|
|
|
|
|
* If the port name starts with "usb", divert the serial routines
|
|
|
|
|
* to the USB ones. The serial_open() function for USB overrides
|
|
|
|
|
* the meaning of the "baud" parameter to be the USB device ID to
|
|
|
|
|
* search for.
|
|
|
|
|
*/
|
|
|
|
|
if (strncmp(port, "usb", 3) == 0) {
|
2006-08-14 21:30:04 +00:00
|
|
|
#if defined(HAVE_LIBUSB)
|
2006-01-12 23:13:50 +00:00
|
|
|
serdev = &usb_serdev_frame;
|
|
|
|
|
baud = USB_DEVICE_AVRISPMKII;
|
2006-09-06 20:06:07 +00:00
|
|
|
pgmtype = PGMTYPE_AVRISP_MKII;
|
2006-01-12 23:13:50 +00:00
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
|
2006-08-14 21:30:04 +00:00
|
|
|
#else
|
|
|
|
|
fprintf(stderr, "avrdude was compiled without usb support.\n");
|
|
|
|
|
return -1;
|
2006-01-12 23:13:50 +00:00
|
|
|
#endif
|
2006-08-14 21:30:04 +00:00
|
|
|
}
|
2006-01-12 23:13:50 +00:00
|
|
|
|
|
|
|
|
strcpy(pgm->port, port);
|
2006-12-11 12:47:35 +00:00
|
|
|
serial_open(port, baud, &pgm->fd);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* drain any extraneous input
|
|
|
|
|
*/
|
|
|
|
|
stk500v2_drain(pgm, 0);
|
|
|
|
|
|
|
|
|
|
stk500v2_getsync(pgm);
|
|
|
|
|
|
|
|
|
|
stk500v2_drain(pgm, 0);
|
|
|
|
|
|
2006-01-17 21:11:39 +00:00
|
|
|
if (pgm->bitclock != 0.0) {
|
|
|
|
|
if (pgm->set_sck_period(pgm, pgm->bitclock) != 0)
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void stk500v2_close(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
DEBUG("STK500V2: stk500v2_close()\n");
|
|
|
|
|
|
2006-12-11 12:47:35 +00:00
|
|
|
serial_close(&pgm->fd);
|
|
|
|
|
pgm->fd.ifd = -1;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_loadaddr(PROGRAMMER * pgm, unsigned int addr)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[16];
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_loadaddr(%d)\n",addr);
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_LOAD_ADDRESS;
|
|
|
|
|
buf[1] = (addr >> 24) & 0xff;
|
|
|
|
|
buf[2] = (addr >> 16) & 0xff;
|
|
|
|
|
buf[3] = (addr >> 8) & 0xff;
|
|
|
|
|
buf[4] = addr & 0xff;
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm, buf, 5, sizeof(buf));
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_loadaddr(): failed to set load address\n",
|
|
|
|
|
progname);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Read a single byte, generic HV mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hv_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char * value,
|
|
|
|
|
enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
int result, cmdlen = 2;
|
2006-07-17 21:25:59 +00:00
|
|
|
char buf[266];
|
2006-07-16 21:30:14 +00:00
|
|
|
unsigned long paddr = 0UL, *paddr_ptr = NULL;
|
|
|
|
|
unsigned int pagesize = 0, use_ext_addr = 0, addrshift = 0;
|
|
|
|
|
unsigned char *cache_ptr = NULL;
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
2006-07-21 21:53:49 +00:00
|
|
|
fprintf(stderr, "%s: stk500hv_read_byte(.., %s, 0x%lx, ...)\n",
|
2006-07-16 21:30:14 +00:00
|
|
|
progname, mem->desc, addr);
|
|
|
|
|
|
|
|
|
|
if (strcmp(mem->desc, "flash") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_FLASH_PP: CMD_READ_FLASH_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
cmdlen = 3;
|
|
|
|
|
pagesize = mem->page_size;
|
|
|
|
|
if (pagesize == 0)
|
|
|
|
|
pagesize = 2;
|
|
|
|
|
paddr = addr & ~(pagesize - 1);
|
|
|
|
|
paddr_ptr = &flash_pageaddr;
|
|
|
|
|
cache_ptr = flash_pagecache;
|
|
|
|
|
addrshift = 1;
|
|
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (mem->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
|
|
|
|
} else if (strcmp(mem->desc, "eeprom") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_EEPROM_PP: CMD_READ_EEPROM_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
cmdlen = 3;
|
|
|
|
|
pagesize = mem->page_size;
|
|
|
|
|
if (pagesize == 0)
|
|
|
|
|
pagesize = 1;
|
|
|
|
|
paddr = addr & ~(pagesize - 1);
|
|
|
|
|
paddr_ptr = &eeprom_pageaddr;
|
|
|
|
|
cache_ptr = eeprom_pagecache;
|
2006-07-19 21:25:08 +00:00
|
|
|
} else if (strcmp(mem->desc, "lfuse") == 0 ||
|
|
|
|
|
strcmp(mem->desc, "fuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_FUSE_PP: CMD_READ_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 0;
|
|
|
|
|
} else if (strcmp(mem->desc, "hfuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_FUSE_PP: CMD_READ_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 1;
|
|
|
|
|
} else if (strcmp(mem->desc, "efuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_FUSE_PP: CMD_READ_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 2;
|
|
|
|
|
} else if (strcmp(mem->desc, "lock") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_LOCK_PP: CMD_READ_LOCK_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(mem->desc, "calibration") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_OSCCAL_PP: CMD_READ_OSCCAL_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(mem->desc, "signature") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_READ_SIGNATURE_PP: CMD_READ_SIGNATURE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
2006-07-21 21:53:49 +00:00
|
|
|
* In HV mode, we have to use paged reads for flash and
|
2006-07-16 21:30:14 +00:00
|
|
|
* EEPROM, and cache the results in a page cache.
|
|
|
|
|
*
|
|
|
|
|
* Page cache validation is based on "{flash,eeprom}_pageaddr"
|
|
|
|
|
* (holding the base address of the most recent cache fill
|
|
|
|
|
* operation). This variable is set to (unsigned long)-1L when the
|
|
|
|
|
* cache needs to be invalidated.
|
|
|
|
|
*/
|
|
|
|
|
if (pagesize && paddr == *paddr_ptr) {
|
|
|
|
|
*value = cache_ptr[addr & (pagesize - 1)];
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (cmdlen == 3) {
|
|
|
|
|
/* long command, fill in # of bytes */
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = (pagesize >> 8) & 0xff;
|
|
|
|
|
buf[2] = pagesize & 0xff;
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
/* flash and EEPROM reads require the load address command */
|
2006-07-17 21:25:59 +00:00
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (paddr >> addrshift));
|
2006-07-16 21:30:14 +00:00
|
|
|
} else {
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = addr;
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
2006-07-21 21:53:49 +00:00
|
|
|
fprintf(stderr, "%s: stk500hv_read_byte(): Sending read memory command: ",
|
2006-07-16 21:30:14 +00:00
|
|
|
progname);
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
result = stk500v2_command(pgm, buf, cmdlen, sizeof(buf));
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
2006-07-16 21:30:14 +00:00
|
|
|
fprintf(stderr,
|
2006-07-21 21:53:49 +00:00
|
|
|
"%s: stk500hv_read_byte(): "
|
2006-10-09 14:34:24 +00:00
|
|
|
"timeout/error communicating with programmer\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (pagesize) {
|
|
|
|
|
*paddr_ptr = paddr;
|
2006-07-17 21:25:59 +00:00
|
|
|
memcpy(cache_ptr, buf + 2, pagesize);
|
2006-07-16 21:30:14 +00:00
|
|
|
*value = cache_ptr[addr & (pagesize - 1)];
|
|
|
|
|
} else {
|
2006-07-17 21:25:59 +00:00
|
|
|
*value = buf[2];
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Read a single byte, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char * value)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_read_byte(pgm, p, mem, addr, value, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Read a single byte, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char * value)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_read_byte(pgm, p, mem, addr, value, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write one byte, generic HV mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hv_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char data,
|
|
|
|
|
enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
2006-07-19 21:25:08 +00:00
|
|
|
int result, cmdlen, timeout = 0, pulsewidth = 0;
|
2006-07-17 21:25:59 +00:00
|
|
|
char buf[266];
|
2006-07-16 21:30:14 +00:00
|
|
|
unsigned long paddr = 0UL, *paddr_ptr = NULL;
|
|
|
|
|
unsigned int pagesize = 0, use_ext_addr = 0, addrshift = 0;
|
|
|
|
|
unsigned char *cache_ptr = NULL;
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
2006-07-21 21:53:49 +00:00
|
|
|
fprintf(stderr, "%s: stk500hv_write_byte(.., %s, 0x%lx, ...)\n",
|
2006-07-16 21:30:14 +00:00
|
|
|
progname, mem->desc, addr);
|
|
|
|
|
|
|
|
|
|
if (strcmp(mem->desc, "flash") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_FLASH_PP: CMD_PROGRAM_FLASH_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
pagesize = mem->page_size;
|
|
|
|
|
if (pagesize == 0)
|
|
|
|
|
pagesize = 2;
|
|
|
|
|
paddr = addr & ~(pagesize - 1);
|
|
|
|
|
paddr_ptr = &flash_pageaddr;
|
|
|
|
|
cache_ptr = flash_pagecache;
|
|
|
|
|
addrshift = 1;
|
|
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (mem->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
|
|
|
|
} else if (strcmp(mem->desc, "eeprom") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_EEPROM_PP: CMD_PROGRAM_EEPROM_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
pagesize = mem->page_size;
|
|
|
|
|
if (pagesize == 0)
|
|
|
|
|
pagesize = 1;
|
|
|
|
|
paddr = addr & ~(pagesize - 1);
|
|
|
|
|
paddr_ptr = &eeprom_pageaddr;
|
|
|
|
|
cache_ptr = eeprom_pagecache;
|
2006-07-19 21:25:08 +00:00
|
|
|
} else if (strcmp(mem->desc, "lfuse") == 0 ||
|
|
|
|
|
strcmp(mem->desc, "fuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_FUSE_PP: CMD_PROGRAM_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 0;
|
2006-07-19 21:25:08 +00:00
|
|
|
pulsewidth = p->programfusepulsewidth;
|
|
|
|
|
timeout = p->programfusepolltimeout;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(mem->desc, "hfuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_FUSE_PP: CMD_PROGRAM_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 1;
|
2006-07-19 21:25:08 +00:00
|
|
|
pulsewidth = p->programfusepulsewidth;
|
|
|
|
|
timeout = p->programfusepolltimeout;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(mem->desc, "efuse") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_FUSE_PP: CMD_PROGRAM_FUSE_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addr = 2;
|
2006-07-19 21:25:08 +00:00
|
|
|
pulsewidth = p->programfusepulsewidth;
|
|
|
|
|
timeout = p->programfusepolltimeout;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else if (strcmp(mem->desc, "lock") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
buf[0] = mode == PPMODE? CMD_PROGRAM_LOCK_PP: CMD_PROGRAM_LOCK_HVSP;
|
2006-07-19 21:25:08 +00:00
|
|
|
pulsewidth = p->programlockpulsewidth;
|
|
|
|
|
timeout = p->programlockpolltimeout;
|
2006-07-16 21:30:14 +00:00
|
|
|
} else {
|
|
|
|
|
fprintf(stderr,
|
2006-07-21 21:53:49 +00:00
|
|
|
"%s: stk500hv_write_byte(): "
|
2006-07-16 21:30:14 +00:00
|
|
|
"unsupported memory type: %s\n",
|
|
|
|
|
progname, mem->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
cmdlen = 5 + pagesize;
|
|
|
|
|
|
|
|
|
|
/*
|
2006-07-21 21:53:49 +00:00
|
|
|
* In HV mode, we have to use paged writes for flash and
|
2006-07-16 21:30:14 +00:00
|
|
|
* EEPROM. As both, flash and EEPROM cells can only be programmed
|
|
|
|
|
* from `1' to `0' bits (even EEPROM does not support auto-erase in
|
|
|
|
|
* parallel mode), we just pre-fill the page cache with 0xff, so all
|
|
|
|
|
* those cells that are outside our current address will remain
|
|
|
|
|
* unaffected.
|
|
|
|
|
*/
|
|
|
|
|
if (pagesize) {
|
|
|
|
|
memset(cache_ptr, 0xff, pagesize);
|
|
|
|
|
cache_ptr[addr & (pagesize - 1)] = data;
|
|
|
|
|
|
|
|
|
|
/* long command, fill in # of bytes */
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = (pagesize >> 8) & 0xff;
|
|
|
|
|
buf[2] = pagesize & 0xff;
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
/*
|
|
|
|
|
* Synthesize the mode byte. This is simpler than adding yet
|
|
|
|
|
* another parameter to the avrdude.conf file. We calculate the
|
|
|
|
|
* bits corresponding to the page size, as explained in AVR068.
|
|
|
|
|
* We set bit 7, to indicate this is to actually write the page to
|
|
|
|
|
* the target device. We set bit 6 to indicate this is the very
|
|
|
|
|
* last page to be programmed, whatever this means -- we just
|
|
|
|
|
* pretend we don't know any better. ;-) Bit 0 is set if this is
|
|
|
|
|
* a paged memory, which means it has a page size of more than 2.
|
|
|
|
|
*/
|
2006-07-19 21:25:08 +00:00
|
|
|
buf[3] = 0x80 | 0x40;
|
|
|
|
|
if (pagesize > 2) {
|
|
|
|
|
buf[3] |= stk500v2_mode_for_pagesize(pagesize);
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[3] |= 0x01;
|
2006-07-19 21:25:08 +00:00
|
|
|
}
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[4] = mem->delay;
|
|
|
|
|
memcpy(buf + 5, cache_ptr, pagesize);
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
/* flash and EEPROM reads require the load address command */
|
|
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (paddr >> addrshift));
|
|
|
|
|
} else {
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = addr;
|
|
|
|
|
buf[2] = data;
|
2006-07-21 21:53:49 +00:00
|
|
|
if (mode == PPMODE) {
|
|
|
|
|
buf[3] = pulsewidth;
|
|
|
|
|
buf[4] = timeout;
|
|
|
|
|
} else {
|
|
|
|
|
buf[3] = timeout;
|
|
|
|
|
cmdlen--;
|
|
|
|
|
}
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
2006-07-21 21:53:49 +00:00
|
|
|
fprintf(stderr, "%s: stk500hv_write_byte(): Sending write memory command: ",
|
2006-07-16 21:30:14 +00:00
|
|
|
progname);
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
result = stk500v2_command(pgm, buf, cmdlen, sizeof(buf));
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
2006-07-16 21:30:14 +00:00
|
|
|
fprintf(stderr,
|
2006-07-21 21:53:49 +00:00
|
|
|
"%s: stk500hv_write_byte(): "
|
2006-10-09 14:34:24 +00:00
|
|
|
"timeout/error communicating with programmer\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (pagesize) {
|
|
|
|
|
/* Invalidate the page cache. */
|
|
|
|
|
*paddr_ptr = (unsigned long)-1L;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Write one byte, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char data)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_write_byte(pgm, p, mem, addr, data, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write one byte, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
|
|
|
|
|
unsigned long addr, unsigned char data)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_write_byte(pgm, p, mem, addr, data, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static int stk500v2_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
2006-05-25 14:38:08 +00:00
|
|
|
unsigned int addr, block_size, last_addr, hiaddr, addrshift, use_ext_addr;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
unsigned char commandbuf[10];
|
|
|
|
|
unsigned char buf[266];
|
|
|
|
|
unsigned char cmds[4];
|
|
|
|
|
int result;
|
2005-09-16 21:23:14 +00:00
|
|
|
OPCODE * rop, * wop;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_paged_write(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
|
|
|
|
|
|
|
|
|
|
if (page_size == 0) page_size = 256;
|
2006-05-25 14:38:08 +00:00
|
|
|
hiaddr = UINT_MAX;
|
|
|
|
|
addrshift = 0;
|
|
|
|
|
use_ext_addr = 0;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
// determine which command is to be used
|
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
2006-05-25 14:38:08 +00:00
|
|
|
addrshift = 1;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
commandbuf[0] = CMD_PROGRAM_FLASH_ISP;
|
2006-05-25 14:38:08 +00:00
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
} else if (strcmp(m->desc, "eeprom") == 0) {
|
|
|
|
|
commandbuf[0] = CMD_PROGRAM_EEPROM_ISP;
|
|
|
|
|
}
|
|
|
|
|
commandbuf[4] = m->delay;
|
|
|
|
|
|
2006-05-25 14:38:08 +00:00
|
|
|
if (addrshift == 0) {
|
2005-09-16 21:23:14 +00:00
|
|
|
wop = m->op[AVR_OP_WRITE];
|
|
|
|
|
rop = m->op[AVR_OP_READ];
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
wop = m->op[AVR_OP_WRITE_LO];
|
|
|
|
|
rop = m->op[AVR_OP_READ_LO];
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
// if the memory is paged, load the appropriate commands into the buffer
|
|
|
|
|
if (m->mode & 0x01) {
|
2005-09-16 21:23:14 +00:00
|
|
|
commandbuf[3] = m->mode | 0x80; // yes, write the page to flash
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
if (m->op[AVR_OP_LOADPAGE_LO] == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_paged_write: loadpage instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
avr_set_bits(m->op[AVR_OP_LOADPAGE_LO], cmds);
|
|
|
|
|
commandbuf[5] = cmds[0];
|
|
|
|
|
|
|
|
|
|
if (m->op[AVR_OP_WRITEPAGE] == NULL) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_paged_write: write page instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
avr_set_bits(m->op[AVR_OP_WRITEPAGE], cmds);
|
|
|
|
|
commandbuf[6] = cmds[0];
|
|
|
|
|
|
|
|
|
|
// otherwise, we need to load different commands in
|
2005-09-16 21:23:14 +00:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
commandbuf[3] = m->mode | 0x80; // yes, write the words to flash
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2005-09-16 21:23:14 +00:00
|
|
|
if (wop == NULL) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
fprintf(stderr, "%s: stk500v2_paged_write: write instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
2005-09-16 21:23:14 +00:00
|
|
|
avr_set_bits(wop, cmds);
|
2005-08-28 22:23:35 +00:00
|
|
|
commandbuf[5] = cmds[0];
|
|
|
|
|
commandbuf[6] = 0;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// the read command is common to both methods
|
2005-09-16 21:23:14 +00:00
|
|
|
if (rop == NULL) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
fprintf(stderr, "%s: stk500v2_paged_write: read instruction not defined for part \"%s\"\n",
|
|
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
2005-09-16 21:23:14 +00:00
|
|
|
avr_set_bits(rop, cmds);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
commandbuf[7] = cmds[0];
|
|
|
|
|
|
|
|
|
|
commandbuf[8] = m->readback[0];
|
|
|
|
|
commandbuf[9] = m->readback[1];
|
|
|
|
|
|
2006-05-25 14:38:08 +00:00
|
|
|
last_addr=UINT_MAX; /* impossible address */
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
for (addr=0; addr < n_bytes; addr += page_size) {
|
|
|
|
|
report_progress(addr,n_bytes,NULL);
|
|
|
|
|
|
|
|
|
|
if ((n_bytes-addr) < page_size)
|
|
|
|
|
block_size = n_bytes - addr;
|
|
|
|
|
else
|
|
|
|
|
block_size = page_size;
|
2005-08-28 22:23:35 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
DEBUG("block_size at addr %d is %d\n",addr,block_size);
|
|
|
|
|
|
2005-08-28 22:23:35 +00:00
|
|
|
if(commandbuf[0] == CMD_PROGRAM_FLASH_ISP){
|
|
|
|
|
if (stk500v2_is_page_empty(addr, block_size, m->buf)) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
memcpy(buf,commandbuf,sizeof(commandbuf));
|
|
|
|
|
|
|
|
|
|
buf[1] = block_size >> 8;
|
|
|
|
|
buf[2] = block_size & 0xff;
|
|
|
|
|
|
2006-05-25 14:38:08 +00:00
|
|
|
if((last_addr==UINT_MAX)||(last_addr+block_size != addr)){
|
|
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
|
2005-08-28 22:23:35 +00:00
|
|
|
}
|
|
|
|
|
last_addr=addr;
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
memcpy(buf+10,m->buf+addr, block_size);
|
|
|
|
|
|
|
|
|
|
result = stk500v2_command(pgm,buf,block_size+10, sizeof(buf));
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_paged_write: write command failed\n",
|
|
|
|
|
progname);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return n_bytes;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Write pages of flash/EEPROM, generic HV mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hv_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes,
|
|
|
|
|
enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
unsigned int addr, block_size, last_addr, hiaddr, addrshift, use_ext_addr;
|
2006-07-17 21:25:59 +00:00
|
|
|
unsigned char commandbuf[5], buf[266];
|
2006-07-16 21:30:14 +00:00
|
|
|
int result;
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
DEBUG("STK500V2: stk500hv_paged_write(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
hiaddr = UINT_MAX;
|
|
|
|
|
addrshift = 0;
|
|
|
|
|
use_ext_addr = 0;
|
|
|
|
|
|
|
|
|
|
// determine which command is to be used
|
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
|
|
|
addrshift = 1;
|
|
|
|
|
flash_pageaddr = (unsigned long)-1L;
|
2006-07-21 21:53:49 +00:00
|
|
|
commandbuf[0] = mode == PPMODE? CMD_PROGRAM_FLASH_PP: CMD_PROGRAM_FLASH_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
|
|
|
|
} else if (strcmp(m->desc, "eeprom") == 0) {
|
|
|
|
|
eeprom_pageaddr = (unsigned long)-1L;
|
2006-07-21 21:53:49 +00:00
|
|
|
commandbuf[0] = mode == PPMODE? CMD_PROGRAM_EEPROM_PP: CMD_PROGRAM_EEPROM_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
2006-07-17 21:25:59 +00:00
|
|
|
/*
|
|
|
|
|
* Synthesize the mode byte. This is simpler than adding yet
|
|
|
|
|
* another parameter to the avrdude.conf file. We calculate the
|
|
|
|
|
* bits corresponding to the page size, as explained in AVR068. We
|
|
|
|
|
* set bit 7, to indicate this is to actually write the page to the
|
|
|
|
|
* target device. We set bit 6 to indicate this is the very last
|
|
|
|
|
* page to be programmed, whatever this means -- we just pretend we
|
|
|
|
|
* don't know any better. ;-) Finally, we set bit 0 to say this is
|
|
|
|
|
* a paged memory, after all, that's why we got here at all.
|
|
|
|
|
*/
|
2006-07-19 21:25:08 +00:00
|
|
|
commandbuf[3] = 0x80 | 0x40;
|
|
|
|
|
if (page_size > 2) {
|
|
|
|
|
commandbuf[3] |= stk500v2_mode_for_pagesize(page_size);
|
|
|
|
|
commandbuf[3] |= 0x01;
|
|
|
|
|
}
|
2006-07-16 21:30:14 +00:00
|
|
|
commandbuf[4] = m->delay;
|
|
|
|
|
|
2006-07-19 21:25:08 +00:00
|
|
|
if (page_size == 0) page_size = 256;
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
last_addr = UINT_MAX; /* impossible address */
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
for (addr = 0; addr < n_bytes; addr += page_size) {
|
2006-07-16 21:30:14 +00:00
|
|
|
report_progress(addr,n_bytes,NULL);
|
|
|
|
|
|
|
|
|
|
if ((n_bytes-addr) < page_size)
|
|
|
|
|
block_size = n_bytes - addr;
|
|
|
|
|
else
|
|
|
|
|
block_size = page_size;
|
|
|
|
|
|
|
|
|
|
DEBUG("block_size at addr %d is %d\n",addr,block_size);
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
if (addrshift == 1) {
|
2006-07-16 21:30:14 +00:00
|
|
|
if (stk500v2_is_page_empty(addr, block_size, m->buf)) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
memcpy(buf, commandbuf, sizeof(commandbuf));
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = page_size >> 8;
|
|
|
|
|
buf[2] = page_size & 0xff;
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
if ((last_addr == UINT_MAX) || (last_addr + block_size != addr)) {
|
|
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
|
|
|
|
|
}
|
|
|
|
|
last_addr=addr;
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
memcpy(buf + 5, m->buf + addr, block_size);
|
|
|
|
|
if (block_size != page_size)
|
|
|
|
|
memset(buf + 5 + block_size, 0xff, page_size - block_size);
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
result = stk500v2_command(pgm, buf, page_size + 5, sizeof(buf));
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500hv_paged_write: write command failed\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return n_bytes;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Write pages of flash/EEPROM, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_paged_write(pgm, p, m, page_size, n_bytes, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write pages of flash/EEPROM, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_paged_write(pgm, p, m, page_size, n_bytes, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static int stk500v2_is_page_empty(unsigned int address, int page_size,
|
|
|
|
|
const unsigned char *buf)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
for(i = 0; i < page_size; i++) {
|
|
|
|
|
if(buf[address + i] != 0xFF) {
|
|
|
|
|
/* Page is not empty. */
|
|
|
|
|
return(0);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Page is empty. */
|
|
|
|
|
return(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int stk500v2_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
2006-05-25 14:38:08 +00:00
|
|
|
unsigned int addr, block_size, hiaddr, addrshift, use_ext_addr;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
unsigned char commandbuf[4];
|
|
|
|
|
unsigned char buf[275]; // max buffer size for stk500v2 at this point
|
|
|
|
|
unsigned char cmds[4];
|
2005-08-28 22:23:35 +00:00
|
|
|
int result;
|
2005-09-16 21:23:14 +00:00
|
|
|
OPCODE * rop;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
DEBUG("STK500V2: stk500v2_paged_load(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
|
|
|
|
|
|
|
|
|
|
page_size = m->readsize;
|
|
|
|
|
|
2005-09-16 21:23:14 +00:00
|
|
|
rop = m->op[AVR_OP_READ];
|
|
|
|
|
|
2006-05-25 14:38:08 +00:00
|
|
|
hiaddr = UINT_MAX;
|
|
|
|
|
addrshift = 0;
|
|
|
|
|
use_ext_addr = 0;
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
// determine which command is to be used
|
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
|
|
|
commandbuf[0] = CMD_READ_FLASH_ISP;
|
2005-09-16 21:23:14 +00:00
|
|
|
rop = m->op[AVR_OP_READ_LO];
|
2006-05-25 14:38:08 +00:00
|
|
|
addrshift = 1;
|
|
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
|
|
|
|
}
|
2005-09-16 21:23:14 +00:00
|
|
|
else if (strcmp(m->desc, "eeprom") == 0) {
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
commandbuf[0] = CMD_READ_EEPROM_ISP;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// the read command is common to both methods
|
2005-09-16 21:23:14 +00:00
|
|
|
if (rop == NULL) {
|
2005-08-28 22:23:35 +00:00
|
|
|
fprintf(stderr, "%s: stk500v2_paged_load: read instruction not defined for part \"%s\"\n",
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
progname, p->desc);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
2005-09-16 21:23:14 +00:00
|
|
|
avr_set_bits(rop, cmds);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
commandbuf[3] = cmds[0];
|
|
|
|
|
|
|
|
|
|
for (addr=0; addr < n_bytes; addr += page_size) {
|
|
|
|
|
report_progress(addr, n_bytes,NULL);
|
|
|
|
|
|
|
|
|
|
if ((n_bytes-addr) < page_size)
|
|
|
|
|
block_size = n_bytes - addr;
|
|
|
|
|
else
|
|
|
|
|
block_size = page_size;
|
|
|
|
|
DEBUG("block_size at addr %d is %d\n",addr,block_size);
|
|
|
|
|
|
|
|
|
|
memcpy(buf,commandbuf,sizeof(commandbuf));
|
|
|
|
|
|
|
|
|
|
buf[1] = block_size >> 8;
|
|
|
|
|
buf[2] = block_size & 0xff;
|
|
|
|
|
|
2006-05-25 14:38:08 +00:00
|
|
|
// Ensure a new "load extended address" will be issued
|
|
|
|
|
// when crossing a 64 KB boundary in flash.
|
|
|
|
|
if (hiaddr != (addr & ~0xFFFF)) {
|
|
|
|
|
hiaddr = addr & ~0xFFFF;
|
|
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
result = stk500v2_command(pgm,buf,4,sizeof(buf));
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_paged_load: read command failed\n",
|
|
|
|
|
progname);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
#if 0
|
|
|
|
|
for (i=0;i<page_size;i++) {
|
|
|
|
|
fprintf(stderr,"%02X",buf[2+i]);
|
|
|
|
|
if (i%16 == 15) fprintf(stderr,"\n");
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
memcpy(&m->buf[addr], &buf[2], block_size);
|
|
|
|
|
}
|
|
|
|
|
|
2005-08-28 22:23:35 +00:00
|
|
|
return n_bytes;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Read pages of flash/EEPROM, generic HV mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hv_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes,
|
|
|
|
|
enum hvmode mode)
|
2006-07-16 21:30:14 +00:00
|
|
|
{
|
|
|
|
|
unsigned int addr, block_size, hiaddr, addrshift, use_ext_addr;
|
2006-07-17 21:25:59 +00:00
|
|
|
unsigned char commandbuf[3], buf[266];
|
2006-07-16 21:30:14 +00:00
|
|
|
int result;
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
DEBUG("STK500V2: stk500hv_paged_load(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
page_size = m->readsize;
|
|
|
|
|
|
|
|
|
|
hiaddr = UINT_MAX;
|
|
|
|
|
addrshift = 0;
|
|
|
|
|
use_ext_addr = 0;
|
|
|
|
|
|
|
|
|
|
// determine which command is to be used
|
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
commandbuf[0] = mode == PPMODE? CMD_READ_FLASH_PP: CMD_READ_FLASH_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
addrshift = 1;
|
|
|
|
|
/*
|
|
|
|
|
* If bit 31 is set, this indicates that the following read/write
|
|
|
|
|
* operation will be performed on a memory that is larger than
|
|
|
|
|
* 64KBytes. This is an indication to STK500 that a load extended
|
|
|
|
|
* address must be executed.
|
|
|
|
|
*/
|
|
|
|
|
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
|
|
|
|
|
use_ext_addr = (1U << 31);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else if (strcmp(m->desc, "eeprom") == 0) {
|
2006-07-21 21:53:49 +00:00
|
|
|
commandbuf[0] = mode == PPMODE? CMD_READ_EEPROM_PP: CMD_READ_EEPROM_HVSP;
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (addr = 0; addr < n_bytes; addr += page_size) {
|
|
|
|
|
report_progress(addr, n_bytes, NULL);
|
|
|
|
|
|
|
|
|
|
if ((n_bytes-addr) < page_size)
|
|
|
|
|
block_size = n_bytes - addr;
|
|
|
|
|
else
|
|
|
|
|
block_size = page_size;
|
|
|
|
|
DEBUG("block_size at addr %d is %d\n",addr,block_size);
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
memcpy(buf, commandbuf, sizeof(commandbuf));
|
2006-07-16 21:30:14 +00:00
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
buf[1] = block_size >> 8;
|
|
|
|
|
buf[2] = block_size & 0xff;
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
// Ensure a new "load extended address" will be issued
|
|
|
|
|
// when crossing a 64 KB boundary in flash.
|
|
|
|
|
if (hiaddr != (addr & ~0xFFFF)) {
|
|
|
|
|
hiaddr = addr & ~0xFFFF;
|
|
|
|
|
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
|
2006-10-09 14:34:24 +00:00
|
|
|
if (result < 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500hv_paged_load: read command failed\n",
|
|
|
|
|
progname);
|
2006-07-16 21:30:14 +00:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
#if 0
|
|
|
|
|
for (i = 0; i < page_size; i++) {
|
|
|
|
|
fprintf(stderr, "%02X", buf[2 + i]);
|
|
|
|
|
if (i % 16 == 15) fprintf(stderr, "\n");
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
memcpy(&m->buf[addr], &buf[2], block_size);
|
2006-07-16 21:30:14 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return n_bytes;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-21 21:53:49 +00:00
|
|
|
/*
|
|
|
|
|
* Read pages of flash/EEPROM, PP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500pp_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_paged_load(pgm, p, m, page_size, n_bytes, PPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Read pages of flash/EEPROM, HVSP mode
|
|
|
|
|
*/
|
|
|
|
|
static int stk500hvsp_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
|
|
|
int page_size, int n_bytes)
|
|
|
|
|
{
|
|
|
|
|
return stk500hv_paged_load(pgm, p, m, page_size, n_bytes, HVSPMODE);
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-16 21:30:14 +00:00
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
static int stk500v2_set_vtarget(PROGRAMMER * pgm, double v)
|
|
|
|
|
{
|
|
|
|
|
unsigned char uaref, utarg;
|
|
|
|
|
|
|
|
|
|
utarg = (unsigned)((v + 0.049) * 10);
|
|
|
|
|
|
|
|
|
|
if (stk500v2_getparm(pgm, PARAM_VADJUST, &uaref) != 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_vtarget(): cannot obtain V[aref]\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (uaref > utarg) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_vtarget(): reducing V[aref] from %.1f to %.1f\n",
|
|
|
|
|
progname, uaref / 10.0, v);
|
|
|
|
|
if (stk500v2_setparm(pgm, PARAM_VADJUST, utarg)
|
|
|
|
|
!= 0)
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
return stk500v2_setparm(pgm, PARAM_VTARGET, utarg);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_set_varef(PROGRAMMER * pgm, double v)
|
|
|
|
|
{
|
|
|
|
|
unsigned char uaref, utarg;
|
|
|
|
|
|
|
|
|
|
uaref = (unsigned)((v + 0.049) * 10);
|
|
|
|
|
|
|
|
|
|
if (stk500v2_getparm(pgm, PARAM_VTARGET, &utarg) != 0) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_varef(): cannot obtain V[target]\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (uaref > utarg) {
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_varef(): V[aref] must not be greater than "
|
|
|
|
|
"V[target] = %.1f\n",
|
|
|
|
|
progname, utarg / 10.0);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
return stk500v2_setparm(pgm, PARAM_VADJUST, uaref);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_set_fosc(PROGRAMMER * pgm, double v)
|
|
|
|
|
{
|
|
|
|
|
int fosc;
|
|
|
|
|
unsigned char prescale, cmatch;
|
|
|
|
|
static unsigned ps[] = {
|
|
|
|
|
1, 8, 32, 64, 128, 256, 1024
|
|
|
|
|
};
|
|
|
|
|
int idx, rc;
|
|
|
|
|
|
|
|
|
|
prescale = cmatch = 0;
|
|
|
|
|
if (v > 0.0) {
|
|
|
|
|
if (v > STK500V2_XTAL / 2) {
|
|
|
|
|
const char *unit;
|
|
|
|
|
if (v > 1e6) {
|
|
|
|
|
v /= 1e6;
|
|
|
|
|
unit = "MHz";
|
|
|
|
|
} else if (v > 1e3) {
|
|
|
|
|
v /= 1e3;
|
|
|
|
|
unit = "kHz";
|
|
|
|
|
} else
|
|
|
|
|
unit = "Hz";
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_fosc(): f = %.3f %s too high, using %.3f MHz\n",
|
|
|
|
|
progname, v, unit, STK500V2_XTAL / 2e6);
|
|
|
|
|
fosc = STK500V2_XTAL / 2;
|
|
|
|
|
} else
|
|
|
|
|
fosc = (unsigned)v;
|
|
|
|
|
|
|
|
|
|
for (idx = 0; idx < sizeof(ps) / sizeof(ps[0]); idx++) {
|
|
|
|
|
if (fosc >= STK500V2_XTAL / (256 * ps[idx] * 2)) {
|
|
|
|
|
/* this prescaler value can handle our frequency */
|
|
|
|
|
prescale = idx + 1;
|
|
|
|
|
cmatch = (unsigned)(STK500V2_XTAL / (2 * fosc * ps[idx])) - 1;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (idx == sizeof(ps) / sizeof(ps[0])) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_set_fosc(): f = %u Hz too low, %u Hz min\n",
|
|
|
|
|
progname, fosc, STK500V2_XTAL / (256 * 1024 * 2));
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((rc = stk500v2_setparm(pgm, PARAM_OSC_PSCALE, prescale)) != 0
|
|
|
|
|
|| (rc = stk500v2_setparm(pgm, PARAM_OSC_CMATCH, cmatch)) != 0)
|
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-12 23:13:50 +00:00
|
|
|
/* The list of SCK frequencies supported by the AVRISP mkII, as listed
|
|
|
|
|
* in AVR069 */
|
|
|
|
|
double avrispmkIIfreqs[] = {
|
|
|
|
|
8000000, 4000000, 2000000, 1000000, 500000, 250000, 125000,
|
|
|
|
|
96386, 89888, 84211, 79208, 74767, 70797, 67227, 64000,
|
|
|
|
|
61069, 58395, 55945, 51613, 49690, 47905, 46243, 43244,
|
|
|
|
|
41885, 39409, 38278, 36200, 34335, 32654, 31129, 29740,
|
|
|
|
|
28470, 27304, 25724, 24768, 23461, 22285, 21221, 20254,
|
|
|
|
|
19371, 18562, 17583, 16914, 16097, 15356, 14520, 13914,
|
|
|
|
|
13224, 12599, 12031, 11511, 10944, 10431, 9963, 9468,
|
|
|
|
|
9081, 8612, 8239, 7851, 7498, 7137, 6809, 6478, 6178,
|
|
|
|
|
5879, 5607, 5359, 5093, 4870, 4633, 4418, 4209, 4019,
|
|
|
|
|
3823, 3645, 3474, 3310, 3161, 3011, 2869, 2734, 2611,
|
|
|
|
|
2484, 2369, 2257, 2152, 2052, 1956, 1866, 1779, 1695,
|
|
|
|
|
1615, 1539, 1468, 1398, 1333, 1271, 1212, 1155, 1101,
|
|
|
|
|
1049, 1000, 953, 909, 866, 826, 787, 750, 715, 682,
|
|
|
|
|
650, 619, 590, 563, 536, 511, 487, 465, 443, 422,
|
|
|
|
|
402, 384, 366, 349, 332, 317, 302, 288, 274, 261,
|
|
|
|
|
249, 238, 226, 216, 206, 196, 187, 178, 170, 162,
|
|
|
|
|
154, 147, 140, 134, 128, 122, 116, 111, 105, 100,
|
|
|
|
|
95.4, 90.9, 86.6, 82.6, 78.7, 75.0, 71.5, 68.2,
|
|
|
|
|
65.0, 61.9, 59.0, 56.3, 53.6, 51.1
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int stk500v2_set_sck_period_mk2(PROGRAMMER * pgm, double v)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof(avrispmkIIfreqs); i++) {
|
|
|
|
|
if (1 / avrispmkIIfreqs[i] >= v)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
2006-09-08 21:10:05 +00:00
|
|
|
if (verbose > 2)
|
|
|
|
|
fprintf(stderr, "Using p = %.2f us for SCK (param = %d)\n",
|
|
|
|
|
1000000 / avrispmkIIfreqs[i], i);
|
2006-01-12 23:13:50 +00:00
|
|
|
|
|
|
|
|
return stk500v2_setparm(pgm, PARAM_SCK_DURATION, i);
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-07-17 21:25:59 +00:00
|
|
|
/*
|
|
|
|
|
* Return the "mode" value for the parallel and HVSP modes that
|
|
|
|
|
* corresponds to the pagesize.
|
|
|
|
|
*/
|
|
|
|
|
static unsigned int stk500v2_mode_for_pagesize(unsigned int pagesize)
|
|
|
|
|
{
|
|
|
|
|
switch (pagesize)
|
|
|
|
|
{
|
|
|
|
|
case 256: return 0u << 1;
|
|
|
|
|
case 2: return 1u << 1;
|
|
|
|
|
case 4: return 2u << 1;
|
|
|
|
|
case 8: return 3u << 1;
|
|
|
|
|
case 16: return 4u << 1;
|
|
|
|
|
case 32: return 5u << 1;
|
|
|
|
|
case 64: return 6u << 1;
|
|
|
|
|
case 128: return 7u << 1;
|
|
|
|
|
}
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_mode_for_pagesize(): invalid pagesize: %u\n",
|
|
|
|
|
progname, pagesize);
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
/* This code assumes that each count of the SCK duration parameter
|
|
|
|
|
represents 8/f, where f is the clock frequency of the STK500V2 master
|
|
|
|
|
processors (not the target). This number comes from Atmel
|
|
|
|
|
application note AVR061. It appears that the STK500V2 bit bangs SCK.
|
|
|
|
|
For small duration values, the actual SCK width is larger than
|
|
|
|
|
expected. As the duration value increases, the SCK width error
|
|
|
|
|
diminishes. */
|
|
|
|
|
static int stk500v2_set_sck_period(PROGRAMMER * pgm, double v)
|
|
|
|
|
{
|
|
|
|
|
unsigned char dur;
|
|
|
|
|
double min, max;
|
|
|
|
|
|
|
|
|
|
min = 8.0 / STK500V2_XTAL;
|
|
|
|
|
max = 255 * min;
|
|
|
|
|
dur = v / min + 0.5;
|
|
|
|
|
|
|
|
|
|
if (v < min) {
|
|
|
|
|
dur = 1;
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_sck_period(): p = %.1f us too small, using %.1f us\n",
|
|
|
|
|
progname, v / 1e-6, dur * min / 1e-6);
|
|
|
|
|
} else if (v > max) {
|
|
|
|
|
dur = 255;
|
|
|
|
|
fprintf(stderr,
|
|
|
|
|
"%s: stk500v2_set_sck_period(): p = %.1f us too large, using %.1f us\n",
|
|
|
|
|
progname, v / 1e-6, dur * min / 1e-6);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return stk500v2_setparm(pgm, PARAM_SCK_DURATION, dur);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int stk500v2_getparm(PROGRAMMER * pgm, unsigned char parm, unsigned char * value)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[32];
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_GET_PARAMETER;
|
|
|
|
|
buf[1] = parm;
|
|
|
|
|
|
|
|
|
|
if (stk500v2_command(pgm, buf, 2, sizeof(buf)) < 0) {
|
|
|
|
|
fprintf(stderr,"%s: stk500v2_getparm(): failed to get parameter 0x%02x\n",
|
|
|
|
|
progname, parm);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*value = buf[2];
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-17 21:11:39 +00:00
|
|
|
static int stk500v2_setparm_real(PROGRAMMER * pgm, unsigned char parm, unsigned char value)
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
{
|
|
|
|
|
unsigned char buf[32];
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_SET_PARAMETER;
|
|
|
|
|
buf[1] = parm;
|
|
|
|
|
buf[2] = value;
|
|
|
|
|
|
|
|
|
|
if (stk500v2_command(pgm, buf, 3, sizeof(buf)) < 0) {
|
|
|
|
|
fprintf(stderr, "\n%s: stk500v2_setparm(): failed to set parameter 0x%02x\n",
|
|
|
|
|
progname, parm);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-17 21:11:39 +00:00
|
|
|
static int stk500v2_setparm(PROGRAMMER * pgm, unsigned char parm, unsigned char value)
|
|
|
|
|
{
|
|
|
|
|
unsigned char current_value;
|
|
|
|
|
int res;
|
|
|
|
|
|
|
|
|
|
res = stk500v2_getparm(pgm, parm, ¤t_value);
|
|
|
|
|
if (res < 0)
|
|
|
|
|
fprintf(stderr, "%s: Unable to get parameter 0x%02x\n", progname, parm);
|
|
|
|
|
|
|
|
|
|
// don't issue a write if the correct value is already set.
|
2006-09-08 21:10:05 +00:00
|
|
|
if (value == current_value && verbose > 2) {
|
2006-01-17 21:11:39 +00:00
|
|
|
fprintf(stderr, "%s: Skipping paramter write; parameter value already set.\n", progname);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return stk500v2_setparm_real(pgm, parm, value);
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
static void stk500v2_display(PROGRAMMER * pgm, char * p)
|
|
|
|
|
{
|
|
|
|
|
unsigned char maj, min, hdw, topcard;
|
2006-08-19 21:02:45 +00:00
|
|
|
const char *topcard_name, *pgmname;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-08-19 21:02:45 +00:00
|
|
|
switch (pgmtype) {
|
|
|
|
|
case PGMTYPE_UNKNOWN: pgmname = "Unknown"; break;
|
|
|
|
|
case PGMTYPE_STK500: pgmname = "STK500"; break;
|
|
|
|
|
case PGMTYPE_AVRISP: pgmname = "AVRISP"; break;
|
|
|
|
|
case PGMTYPE_AVRISP_MKII: pgmname = "AVRISP mkII"; break;
|
|
|
|
|
default: pgmname = "None";
|
|
|
|
|
}
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype != PGMTYPE_JTAGICE_MKII) {
|
|
|
|
|
fprintf(stderr, "%sProgrammer Model: %s\n", p, pgmname);
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_HW_VER, &hdw);
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_SW_MAJOR, &maj);
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_SW_MINOR, &min);
|
|
|
|
|
fprintf(stderr, "%sHardware Version: %d\n", p, hdw);
|
|
|
|
|
fprintf(stderr, "%sFirmware Version: %d.%02d\n", p, maj, min);
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-08-18 21:23:34 +00:00
|
|
|
if (pgmtype == PGMTYPE_STK500) {
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_TOPCARD_DETECT, &topcard);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
switch (topcard) {
|
|
|
|
|
case 0xAA: topcard_name = "STK501"; break;
|
|
|
|
|
case 0x55: topcard_name = "STK502"; break;
|
|
|
|
|
case 0xFA: topcard_name = "STK503"; break;
|
|
|
|
|
case 0xEE: topcard_name = "STK504"; break;
|
|
|
|
|
case 0xE4: topcard_name = "STK505"; break;
|
|
|
|
|
case 0xDD: topcard_name = "STK520"; break;
|
|
|
|
|
default: topcard_name = "Unknown"; break;
|
|
|
|
|
}
|
|
|
|
|
fprintf(stderr, "%sTopcard : %s\n", p, topcard_name);
|
|
|
|
|
}
|
|
|
|
|
stk500v2_print_parms1(pgm, p);
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void stk500v2_print_parms1(PROGRAMMER * pgm, char * p)
|
|
|
|
|
{
|
|
|
|
|
unsigned char vtarget, vadjust, osc_pscale, osc_cmatch, sck_duration;
|
2006-09-06 20:06:07 +00:00
|
|
|
unsigned char vtarget_jtag[4];
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype == PGMTYPE_JTAGICE_MKII) {
|
|
|
|
|
jtagmkII_getparm(pgm, PAR_OCD_VTARGET, vtarget_jtag);
|
|
|
|
|
fprintf(stderr, "%sVtarget : %.1f V\n", p,
|
|
|
|
|
b2_to_u16(vtarget_jtag) / 1000.0);
|
|
|
|
|
} else {
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_VTARGET, &vtarget);
|
|
|
|
|
fprintf(stderr, "%sVtarget : %.1f V\n", p, vtarget / 10.0);
|
|
|
|
|
}
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
stk500v2_getparm(pgm, PARAM_SCK_DURATION, &sck_duration);
|
2006-08-19 21:02:45 +00:00
|
|
|
|
|
|
|
|
if (pgmtype == PGMTYPE_STK500) {
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_VADJUST, &vadjust);
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_OSC_PSCALE, &osc_pscale);
|
|
|
|
|
stk500v2_getparm(pgm, PARAM_OSC_CMATCH, &osc_cmatch);
|
|
|
|
|
fprintf(stderr, "%sVaref : %.1f V\n", p, vadjust / 10.0);
|
|
|
|
|
fprintf(stderr, "%sOscillator : ", p);
|
|
|
|
|
if (osc_pscale == 0)
|
|
|
|
|
fprintf(stderr, "Off\n");
|
|
|
|
|
else {
|
|
|
|
|
int prescale = 1;
|
|
|
|
|
double f = STK500V2_XTAL / 2;
|
|
|
|
|
const char *unit;
|
|
|
|
|
|
|
|
|
|
switch (osc_pscale) {
|
|
|
|
|
case 2: prescale = 8; break;
|
|
|
|
|
case 3: prescale = 32; break;
|
|
|
|
|
case 4: prescale = 64; break;
|
|
|
|
|
case 5: prescale = 128; break;
|
|
|
|
|
case 6: prescale = 256; break;
|
|
|
|
|
case 7: prescale = 1024; break;
|
|
|
|
|
}
|
|
|
|
|
f /= prescale;
|
|
|
|
|
f /= (osc_cmatch + 1);
|
|
|
|
|
if (f > 1e6) {
|
|
|
|
|
f /= 1e6;
|
|
|
|
|
unit = "MHz";
|
|
|
|
|
} else if (f > 1e3) {
|
|
|
|
|
f /= 1000;
|
|
|
|
|
unit = "kHz";
|
|
|
|
|
} else
|
|
|
|
|
unit = "Hz";
|
|
|
|
|
fprintf(stderr, "%.3f %s\n", f, unit);
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
}
|
|
|
|
|
}
|
2006-09-06 20:06:07 +00:00
|
|
|
if (pgmtype == PGMTYPE_AVRISP_MKII || pgmtype == PGMTYPE_JTAGICE_MKII)
|
2006-01-12 23:13:50 +00:00
|
|
|
fprintf(stderr, "%sSCK period : %.2f us\n", p,
|
|
|
|
|
(float) 1000000 / avrispmkIIfreqs[sck_duration]);
|
|
|
|
|
else
|
|
|
|
|
fprintf(stderr, "%sSCK period : %.1f us\n", p,
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
sck_duration * 8.0e6 / STK500V2_XTAL + 0.05);
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void stk500v2_print_parms(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
stk500v2_print_parms1(pgm, "");
|
|
|
|
|
}
|
|
|
|
|
|
2006-10-09 14:34:24 +00:00
|
|
|
static int stk500v2_perform_osccal(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
unsigned char buf[32];
|
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
|
|
buf[0] = CMD_OSCCAL;
|
|
|
|
|
|
|
|
|
|
rv = stk500v2_command(pgm, buf, 1, sizeof(buf));
|
|
|
|
|
if (rv < 0) {
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_perform_osccal(): failed\n",
|
|
|
|
|
progname);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
2006-09-06 20:06:07 +00:00
|
|
|
/*
|
|
|
|
|
* Wrapper functions for the JTAG ICE mkII in ISP mode. This mode
|
|
|
|
|
* uses the normal JTAG ICE mkII packet stream to communicate with the
|
|
|
|
|
* ICE, but then encapsulates AVRISP mkII commands using
|
|
|
|
|
* CMND_ISP_PACKET.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Open a JTAG ICE mkII in ISP mode.
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_jtagmkII_open(PROGRAMMER * pgm, char * port)
|
|
|
|
|
{
|
|
|
|
|
long baud;
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_jtagmkII_open()\n", progname);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The JTAG ICE mkII always starts with a baud rate of 19200 Bd upon
|
|
|
|
|
* attaching. If the config file or command-line parameters specify
|
|
|
|
|
* a higher baud rate, we switch to it later on, after establishing
|
|
|
|
|
* the connection with the ICE.
|
|
|
|
|
*/
|
|
|
|
|
baud = 19200;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the port name starts with "usb", divert the serial routines
|
|
|
|
|
* to the USB ones. The serial_open() function for USB overrides
|
|
|
|
|
* the meaning of the "baud" parameter to be the USB device ID to
|
|
|
|
|
* search for.
|
|
|
|
|
*/
|
|
|
|
|
if (strncmp(port, "usb", 3) == 0) {
|
|
|
|
|
#if defined(HAVE_LIBUSB)
|
|
|
|
|
serdev = &usb_serdev;
|
|
|
|
|
baud = USB_DEVICE_JTAGICEMKII;
|
|
|
|
|
#else
|
|
|
|
|
fprintf(stderr, "avrdude was compiled without usb support.\n");
|
|
|
|
|
return -1;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
strcpy(pgm->port, port);
|
2006-12-11 12:47:35 +00:00
|
|
|
serial_open(port, baud, &pgm->fd);
|
2006-09-06 20:06:07 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* drain any extraneous input
|
|
|
|
|
*/
|
|
|
|
|
stk500v2_drain(pgm, 0);
|
|
|
|
|
|
|
|
|
|
if (jtagmkII_getsync(pgm, EMULATOR_MODE_SPI) != 0) {
|
|
|
|
|
fprintf(stderr, "%s: failed to sync with the JTAG ICE mkII in ISP mode\n",
|
|
|
|
|
progname);
|
2006-09-06 22:33:59 +00:00
|
|
|
pgm->close(pgm); /* sign off correctly */
|
2006-09-06 20:06:07 +00:00
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pgmtype = PGMTYPE_JTAGICE_MKII;
|
|
|
|
|
|
|
|
|
|
if (pgm->bitclock != 0.0) {
|
|
|
|
|
if (pgm->set_sck_period(pgm, pgm->bitclock) != 0)
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-10-26 21:14:10 +00:00
|
|
|
/*
|
|
|
|
|
* Wrapper functions for the AVR Dragon in ISP mode. This mode
|
|
|
|
|
* uses the normal JTAG ICE mkII packet stream to communicate with the
|
|
|
|
|
* ICE, but then encapsulates AVRISP mkII commands using
|
|
|
|
|
* CMND_ISP_PACKET.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Open an AVR Dragon in ISP mode.
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_dragon_isp_open(PROGRAMMER * pgm, char * port)
|
|
|
|
|
{
|
|
|
|
|
long baud;
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_dragon_isp_open()\n", progname);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The JTAG ICE mkII always starts with a baud rate of 19200 Bd upon
|
|
|
|
|
* attaching. If the config file or command-line parameters specify
|
|
|
|
|
* a higher baud rate, we switch to it later on, after establishing
|
|
|
|
|
* the connection with the ICE.
|
|
|
|
|
*/
|
|
|
|
|
baud = 19200;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the port name starts with "usb", divert the serial routines
|
|
|
|
|
* to the USB ones. The serial_open() function for USB overrides
|
|
|
|
|
* the meaning of the "baud" parameter to be the USB device ID to
|
|
|
|
|
* search for.
|
|
|
|
|
*/
|
|
|
|
|
if (strncmp(port, "usb", 3) == 0) {
|
|
|
|
|
#if defined(HAVE_LIBUSB)
|
|
|
|
|
serdev = &usb_serdev;
|
|
|
|
|
baud = USB_DEVICE_AVRDRAGON;
|
|
|
|
|
#else
|
|
|
|
|
fprintf(stderr, "avrdude was compiled without usb support.\n");
|
|
|
|
|
return -1;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
strcpy(pgm->port, port);
|
2006-12-11 12:47:35 +00:00
|
|
|
serial_open(port, baud, &pgm->fd);
|
2006-10-26 21:14:10 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* drain any extraneous input
|
|
|
|
|
*/
|
|
|
|
|
stk500v2_drain(pgm, 0);
|
|
|
|
|
|
|
|
|
|
if (jtagmkII_getsync(pgm, EMULATOR_MODE_SPI) != 0) {
|
|
|
|
|
fprintf(stderr, "%s: failed to sync with the JTAG ICE mkII in ISP mode\n",
|
|
|
|
|
progname);
|
|
|
|
|
pgm->close(pgm); /* sign off correctly */
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pgmtype = PGMTYPE_JTAGICE_MKII;
|
|
|
|
|
|
|
|
|
|
if (pgm->bitclock != 0.0) {
|
|
|
|
|
if (pgm->set_sck_period(pgm, pgm->bitclock) != 0)
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-11-01 21:47:25 +00:00
|
|
|
/*
|
|
|
|
|
* Wrapper functions for the AVR Dragon in HV mode. This mode
|
|
|
|
|
* uses the normal JTAG ICE mkII packet stream to communicate with the
|
|
|
|
|
* ICE, but then encapsulates AVRISP mkII commands using
|
|
|
|
|
* CMND_ISP_PACKET.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Open an AVR Dragon in HV mode (HVSP or parallel).
|
|
|
|
|
*/
|
|
|
|
|
static int stk500v2_dragon_hv_open(PROGRAMMER * pgm, char * port)
|
|
|
|
|
{
|
|
|
|
|
long baud;
|
|
|
|
|
|
|
|
|
|
if (verbose >= 2)
|
|
|
|
|
fprintf(stderr, "%s: stk500v2_dragon_hv_open()\n", progname);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The JTAG ICE mkII always starts with a baud rate of 19200 Bd upon
|
|
|
|
|
* attaching. If the config file or command-line parameters specify
|
|
|
|
|
* a higher baud rate, we switch to it later on, after establishing
|
|
|
|
|
* the connection with the ICE.
|
|
|
|
|
*/
|
|
|
|
|
baud = 19200;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the port name starts with "usb", divert the serial routines
|
|
|
|
|
* to the USB ones. The serial_open() function for USB overrides
|
|
|
|
|
* the meaning of the "baud" parameter to be the USB device ID to
|
|
|
|
|
* search for.
|
|
|
|
|
*/
|
|
|
|
|
if (strncmp(port, "usb", 3) == 0) {
|
|
|
|
|
#if defined(HAVE_LIBUSB)
|
|
|
|
|
serdev = &usb_serdev;
|
|
|
|
|
baud = USB_DEVICE_AVRDRAGON;
|
|
|
|
|
#else
|
|
|
|
|
fprintf(stderr, "avrdude was compiled without usb support.\n");
|
|
|
|
|
return -1;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
strcpy(pgm->port, port);
|
2006-12-11 12:47:35 +00:00
|
|
|
serial_open(port, baud, &pgm->fd);
|
2006-11-01 21:47:25 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* drain any extraneous input
|
|
|
|
|
*/
|
|
|
|
|
stk500v2_drain(pgm, 0);
|
|
|
|
|
|
|
|
|
|
if (jtagmkII_getsync(pgm, EMULATOR_MODE_HV) != 0) {
|
|
|
|
|
fprintf(stderr, "%s: failed to sync with the JTAG ICE mkII in HV mode\n",
|
|
|
|
|
progname);
|
|
|
|
|
pgm->close(pgm); /* sign off correctly */
|
|
|
|
|
exit(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pgmtype = PGMTYPE_JTAGICE_MKII;
|
|
|
|
|
|
|
|
|
|
if (pgm->bitclock != 0.0) {
|
|
|
|
|
if (pgm->set_sck_period(pgm, pgm->bitclock) != 0)
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
void stk500v2_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "STK500V2");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500v2_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500v2_disable;
|
|
|
|
|
pgm->program_enable = stk500v2_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500v2_chip_erase;
|
|
|
|
|
pgm->cmd = stk500v2_cmd;
|
|
|
|
|
pgm->open = stk500v2_open;
|
|
|
|
|
pgm->close = stk500v2_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = avr_read_byte_default;
|
|
|
|
|
pgm->write_byte = avr_write_byte_default;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500v2_paged_write;
|
|
|
|
|
pgm->paged_load = stk500v2_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_vtarget = stk500v2_set_vtarget;
|
|
|
|
|
pgm->set_varef = stk500v2_set_varef;
|
|
|
|
|
pgm->set_fosc = stk500v2_set_fosc;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period;
|
2006-10-09 14:34:24 +00:00
|
|
|
pgm->perform_osccal = stk500v2_perform_osccal;
|
Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).
Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).
The JTAG ICE mkII support should be considered alpha to beta quality
at this point. Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required. Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).
Note that for the JTAG ICE, I did change a few things in the internal
API. Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation). Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character. The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery. The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
void stk500pp_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "STK500PP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500pp_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500pp_disable;
|
|
|
|
|
pgm->program_enable = stk500pp_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500pp_chip_erase;
|
|
|
|
|
pgm->open = stk500v2_open;
|
|
|
|
|
pgm->close = stk500v2_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = stk500pp_read_byte;
|
|
|
|
|
pgm->write_byte = stk500pp_write_byte;
|
2006-07-16 21:30:14 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500pp_paged_write;
|
|
|
|
|
pgm->paged_load = stk500pp_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_vtarget = stk500v2_set_vtarget;
|
|
|
|
|
pgm->set_varef = stk500v2_set_varef;
|
|
|
|
|
pgm->set_fosc = stk500v2_set_fosc;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period;
|
|
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
2006-07-21 21:53:49 +00:00
|
|
|
|
|
|
|
|
void stk500hvsp_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "STK500HVSP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500hvsp_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500hvsp_disable;
|
|
|
|
|
pgm->program_enable = stk500hvsp_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500hvsp_chip_erase;
|
|
|
|
|
pgm->open = stk500v2_open;
|
|
|
|
|
pgm->close = stk500v2_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = stk500hvsp_read_byte;
|
|
|
|
|
pgm->write_byte = stk500hvsp_write_byte;
|
2006-07-21 21:53:49 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500hvsp_paged_write;
|
|
|
|
|
pgm->paged_load = stk500hvsp_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_vtarget = stk500v2_set_vtarget;
|
|
|
|
|
pgm->set_varef = stk500v2_set_varef;
|
|
|
|
|
pgm->set_fosc = stk500v2_set_fosc;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period;
|
|
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
2006-09-06 20:06:07 +00:00
|
|
|
|
|
|
|
|
void stk500v2_jtagmkII_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "JTAGMKII_ISP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500v2_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500v2_disable;
|
|
|
|
|
pgm->program_enable = stk500v2_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500v2_chip_erase;
|
|
|
|
|
pgm->cmd = stk500v2_cmd;
|
|
|
|
|
pgm->open = stk500v2_jtagmkII_open;
|
|
|
|
|
pgm->close = jtagmkII_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = avr_read_byte_default;
|
|
|
|
|
pgm->write_byte = avr_write_byte_default;
|
2006-09-06 20:06:07 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500v2_paged_write;
|
|
|
|
|
pgm->paged_load = stk500v2_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
|
2006-10-09 14:34:24 +00:00
|
|
|
pgm->perform_osccal = stk500v2_perform_osccal;
|
2006-09-06 20:06:07 +00:00
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
2006-10-26 21:14:10 +00:00
|
|
|
|
|
|
|
|
void stk500v2_dragon_isp_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "DRAGON_ISP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500v2_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500v2_disable;
|
|
|
|
|
pgm->program_enable = stk500v2_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500v2_chip_erase;
|
|
|
|
|
pgm->cmd = stk500v2_cmd;
|
|
|
|
|
pgm->open = stk500v2_dragon_isp_open;
|
|
|
|
|
pgm->close = jtagmkII_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = avr_read_byte_default;
|
|
|
|
|
pgm->write_byte = avr_write_byte_default;
|
2006-10-26 21:14:10 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500v2_paged_write;
|
|
|
|
|
pgm->paged_load = stk500v2_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
|
|
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
2006-11-01 21:47:25 +00:00
|
|
|
|
|
|
|
|
void stk500v2_dragon_pp_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "DRAGON_PP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500pp_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500pp_disable;
|
|
|
|
|
pgm->program_enable = stk500pp_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500pp_chip_erase;
|
|
|
|
|
pgm->open = stk500v2_dragon_hv_open;
|
|
|
|
|
pgm->close = jtagmkII_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = stk500pp_read_byte;
|
|
|
|
|
pgm->write_byte = stk500pp_write_byte;
|
2006-11-01 21:47:25 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500pp_paged_write;
|
|
|
|
|
pgm->paged_load = stk500pp_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_vtarget = stk500v2_set_vtarget;
|
|
|
|
|
pgm->set_varef = stk500v2_set_varef;
|
|
|
|
|
pgm->set_fosc = stk500v2_set_fosc;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
|
|
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void stk500v2_dragon_hvsp_initpgm(PROGRAMMER * pgm)
|
|
|
|
|
{
|
|
|
|
|
strcpy(pgm->type, "DRAGON_HVSP");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* mandatory functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->initialize = stk500hvsp_initialize;
|
|
|
|
|
pgm->display = stk500v2_display;
|
|
|
|
|
pgm->enable = stk500v2_enable;
|
|
|
|
|
pgm->disable = stk500hvsp_disable;
|
|
|
|
|
pgm->program_enable = stk500hvsp_program_enable;
|
|
|
|
|
pgm->chip_erase = stk500hvsp_chip_erase;
|
|
|
|
|
pgm->open = stk500v2_dragon_hv_open;
|
|
|
|
|
pgm->close = jtagmkII_close;
|
2006-11-20 15:04:09 +00:00
|
|
|
pgm->read_byte = stk500hvsp_read_byte;
|
|
|
|
|
pgm->write_byte = stk500hvsp_write_byte;
|
2006-11-01 21:47:25 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* optional functions
|
|
|
|
|
*/
|
|
|
|
|
pgm->paged_write = stk500hvsp_paged_write;
|
|
|
|
|
pgm->paged_load = stk500hvsp_paged_load;
|
|
|
|
|
pgm->print_parms = stk500v2_print_parms;
|
|
|
|
|
pgm->set_vtarget = stk500v2_set_vtarget;
|
|
|
|
|
pgm->set_varef = stk500v2_set_varef;
|
|
|
|
|
pgm->set_fosc = stk500v2_set_fosc;
|
|
|
|
|
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
|
|
|
|
|
pgm->page_size = 256;
|
|
|
|
|
}
|
