avrdude/ChangeLog

2014-10-06  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* stk500v2.c: Use stk500isp_read_byte/stk500isp_write_byte for
	every byte-wide access (rather than JTAGICE3 only).  This finally
	obsoletes the use of the prehistoric SPI_MULTI command where
	AVRDUDE used to assemble all the low-level ISP stuff by itself.

2014-10-06  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	bug #22248: Read efuse error
	* avrdude.conf.in (m168, m328, m48, m88, t1634, t26, t261, t461,
	t861, t88): In efuse (or hfuse for t26) read operation, turn all
	bits in byte 3 from "x" to "o" (output); this is a first step
	towards fixing the symptoms mentioned in the bug, by unifying the
	behaviour between different AVRs.  Not touched are the historic
	devices where the fuses are not documented to form a full byte
	each (2333, 4433, 4434, 8535, m103, m161, m163).

2014-09-22  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	bug #43268: usb_drain() call causes LUFA AVR-ISP MKII Code to Fail
	* usb_libusb.c (usbdev_drain): Make this a dummy function only.

2014-08-19  Rene Liebscher <R.Liebscher@gmx.de>

	patch #7694 Add support for the atmega32m1
	* avrdude.conf.in: added ATmega32M1

2014-08-18  Rene Liebscher <R.Liebscher@gmx.de>

	patch #8440 Print part id after signature
	When printing the part signature also print the part id.
	* avrpart.c (locate_part_by_signature): New function.
	* libavrdude.h (locate_part_by_signature): New function.
	* main.c (main): Use the new function to find the part and print its id.

2014-08-18  Rene Liebscher <R.Liebscher@gmx.de>

	patch #8511 Fix reset on FT245R
	* ft245r.c: applied patch

2014-08-18  Rene Liebscher <R.Liebscher@gmx.de>

	bug #43002 usbasp debug output typo
	* usbasp.c: fixed typos

2014-07-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	bug #42662 clang warnings under FreeBSD 10.x
	* avrftdi.h: Fix header guard macro name.
	* pgm_type.c (programmers_types): Remove duplicate "const".

2014-07-16  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42662 clang warnings under FreeBSD 10.x
	* avrftdi.c: remove warnings
	* buspirate.c: (Dito.)
	* dfu.c: (Dito.)
	* fileio.c: (Dito.)
	* libavrdude.h: (Dito.)
	* pickit2.c: (Dito.)
	* safemode.c: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* stk500v2.c: (Dito.)
	* usb_libusb.c: (Dito.)
	* usbasp.c: (Dito.)

	* config_gram.y: fix problem when using parent part with usbpid lists
                         (existing list was extended not overwritten)

2014-07-11  Axel Wachtler <axel@uracoli.de>

	* avrftdi.c: rollback to vfprintf, fixed error from -r1305, (patch #8463)

2014-06-23  Rene Liebscher <R.Liebscher@gmx.de>

	* linux_ppdev.h: added missing msg level for avrdude_message
                         in ppi_claim/ppi_release macros
	* avrftdi.c: added break at end of default

2014-06-21  Rene Liebscher <R.Liebscher@gmx.de>

	patch #8419 fix ftdi_syncbb hang with libftdi 1
	* ft245r.c: set pthread cancel type to asynchronous, reorder ftdi_usb_close/deinit

2014-06-17  Rene Liebscher <R.Liebscher@gmx.de>

	* avrftdi_private.h: added missing msg level for avrdude_message 
                             in E/E_VOID macros

2014-06-17  Rene Liebscher <R.Liebscher@gmx.de>

	Removing exit calls from config parser
	* config.h: cleanup, left only internally needed definitions
	* config.c: removed exit calls, use yyerror and yywarning
	* config_gram.y: (Dito.)
	* lexer.l: (Dito.)
	* libavrdude.h: removed internal definitions of config parser
	* main.c: removed yyerror, it is now in config.c
	* jtagmkII.c: added missing free in error case
	* pgm.c: replaced exits by returns
	* pickit2.c: add missing return

2014-06-13  Axel Wachtler <axel@uracoli.de>
	
        start removing global "verbose" variable, for avrdude library.
        * arduino.c: added verbose level in avrdude_message()
	* avr910.c: (Dito.)
	* avr.c: (Dito.)
	* avrdude.h: (Dito.)
	* avrftdi.c: (Dito.)
	* avrpart.c: (Dito.)
	* bitbang.c: (Dito.)
	* buspirate.c: (Dito.)
	* butterfly.c: (Dito.)
	* config.c: (Dito.)
	* config_gram.y: (Dito.)
	* dfu.c: (Dito.)
	* fileio.c: (Dito.)
	* flip1.c: (Dito.)
	* flip2.c: (Dito.)
	* ft245r.c: (Dito.)
	* jtag3.c: (Dito.)
	* jtagmkI.c: (Dito.)
	* jtagmkII.c: (Dito.)
	* lexer.l: (Dito.)
	* libavrdude.h: (Dito.)
	* linuxgpio.c: (Dito.)
	* main.c: (Dito.)
	* par.c: (Dito.)
	* pgm.c: (Dito.)
	* pickit2.c: (Dito.)
	* pindefs.c: (Dito.)
	* ppi.c: (Dito.)
	* ppiwin.c: (Dito.)
	* safemode.c: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* serbb_posix.c: (Dito.)
	* serbb_win32.c: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* stk500.c: (Dito.)
	* stk500generic.c: (Dito.)
	* stk500v2.c: (Dito.)
	* term.c: (Dito.)
	* update.c: (Dito.)
	* usbasp.c: (Dito.)
	* usb_libusb.c: (Dito.)
	* usbtiny.c: (Dito.)
	* wiring.c: (Dito.)

2014-06-11  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42516 spelling-error-in-binary
	* stk500v2.c, avrftdi.c, usbasp.c: fixed spelling errors

2014-06-01  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42337 avrdude.conf updates for UM232H/CM232H
	* avrdude.conf.in: fixed entries as proposed

2014-05-19  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	bug #41854: avrdude 6.1 does not compile on systems without libUSB
	Submitted by Didrik Madheden:
	* flip1.c: Provide dummy functions for the #ifndef HAVE_LIBUSB case
	* flip2.c: (Dito.)

2014-05-19  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* libavrdude.h: Join the former "public" header files (avr.h avrpart.h pindefs.h
	serial.h fileio.h safemode.h update.h pgm_type.h config.h confwin.h lists.h) into
	a single header that can be included by anyone wanting to link against the
	library
	* avr.h: Remove file.
	* avrpart.h: (Dito.)
	* pindefs.h: (Dito.)
	* serial.h: (Dito.)
	* fileio.h: (Dito.)
	* safemode.h: (Dito.)
	* update.h: (Dito.)
	* pgm.h: (Dito.)
	* pgm_type.h: (Dito.)
	* config.h: (Dito.)
	* confwin.h: (Dito.)
	* lists.h: (Dito.)
	* Makefile.am: Adapt for new include file constellation; install shared lib
	* configure.ac: Bump version date
	* arduino.c: #include <libavrdude.h> rather than a bunch of different headers
	* avr910.c: (Dito.)
	* avr910.h: (Dito.)
	* avr.c: (Dito.)
	* avrftdi.c: (Dito.)
	* avrftdi_private.h: (Dito.)
	* avrftdi_tpi.c: (Dito.)
	* avrftdi_tpi.h: (Dito.)
	* avr.h: (Dito.)
	* avrpart.c: (Dito.)
	* avrpart.h: (Dito.)
	* bitbang.c: (Dito.)
	* buspirate.c: (Dito.)
	* butterfly.c: (Dito.)
	* config.c: (Dito.)
	* config_gram.y: (Dito.)
	* config.h: (Dito.)
	* confwin.c: (Dito.)
	* confwin.h: (Dito.)
	* dfu.c: (Dito.)
	* fileio.c: (Dito.)
	* fileio.h: (Dito.)
	* flip1.c: (Dito.)
	* flip1.h: (Dito.)
	* flip2.c: (Dito.)
	* flip2.h: (Dito.)
	* ft245r.c: (Dito.)
	* ft245r.h: (Dito.)
	* jtag3.c: (Dito.)
	* jtagmkI.c: (Dito.)
	* jtagmkII.c: (Dito.)
	* lexer.l: (Dito.)
	* libavrdude.h: (Dito.)
	* linuxgpio.c: (Dito.)
	* lists.c: (Dito.)
	* lists.h: (Dito.)
	* main.c: (Dito.)
	* par.c: (Dito.)
	* pgm.c: (Dito.)
	* pgm_type.c: (Dito.)
	* pgm_type.h: (Dito.)
	* pickit2.c: (Dito.)
	* pickit2.h: (Dito.)
	* pindefs.c: (Dito.)
	* pindefs.h: (Dito.)
	* ppi.c: (Dito.)
	* ppiwin.c: (Dito.)
	* safemode.c: (Dito.)
	* safemode.h: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* serbb_posix.c: (Dito.)
	* serbb_win32.c: (Dito.)
	* serial.h: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* stk500.c: (Dito.)
	* stk500generic.c: (Dito.)
	* stk500v2.c: (Dito.)
	* stk500v2_private.h: (Dito.)
	* term.c: (Dito.)
	* term.h: (Dito.)
	* update.c: (Dito.)
	* update.h: (Dito.)
	* usbasp.c: (Dito.)
	* usbasp.h: (Dito.)
	* usb_libusb.c: (Dito.)
	* usbtiny.c: (Dito.)
	* usbtiny.h: (Dito.)
	* wiring.c: (Dito.)

2014-05-19  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* main.c: Cleanup unused include files.

2014-05-19  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* linux_ppdev.h: Caught two more instances of exit()
	* configure.ac: Add AC_CONFIG_MACRO_DIR as suggested by libtoolize
	* Makefile.am: add -I m4 to ACLOCAL_AMFLAGS as suggested by libtoolize

2014-05-16  Axel Wachtler <axel@uracoli.de>

	* arduino.c: Replacing all occurences of fprintf(stderr,...) with avrdude_message(...)
	in potential library functions.
	* avr910.c: (Dito.)
	* avr.c: (Dito.)
	* avrdude.h: (Dito.)
	* avrftdi.c: (Dito.)
	* avrftdi_private.h: (Dito.)
	* avrpart.c: (Dito.)
	* bitbang.c: (Dito.)
	* buspirate.c: (Dito.)
	* butterfly.c: (Dito.)
	* config.c: (Dito.)
	* config_gram.y: (Dito.)
	* dfu.c: (Dito.)
	* fileio.c: (Dito.)
	* flip1.c: (Dito.)
	* flip2.c: (Dito.)
	* ft245r.c: (Dito.)
	* jtag3.c: (Dito.)
	* jtagmkI.c: (Dito.)
	* jtagmkII.c: (Dito.)
	* lexer.l: (Dito.)
	* linuxgpio.c: (Dito.)
	* linux_ppdev.h: (Dito.)
	* main.c: (Dito.)
	* par.c: (Dito.)
	* pgm.c: (Dito.)
	* pickit2.c: (Dito.)
	* pindefs.c: (Dito.)
	* ppi.c: (Dito.)
	* ppiwin.c: (Dito.)
	* safemode.c: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* serbb_posix.c: (Dito.)
	* serbb_win32.c: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* stk500.c: (Dito.)
	* stk500generic.c: (Dito.)
	* stk500v2.c: (Dito.)
	* term.c: (Dito.)
	* update.c: (Dito.)
	* usbasp.c: (Dito.)
	* usb_libusb.c: (Dito.)
	* usbtiny.c: (Dito.)
	* wiring.c: (Dito.)

2014-05-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* configure.ac: Bump version, add libtool hooks
	* Makefile.am: First attempt to define building a shared library
	(not to be installed by now)

2014-05-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* dfu.c (dfu_open, dfu_init): Fix signature of the dummy functions
	(in the !HAVE_LIBUSB case) to match prototypes.

2014-05-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* avr910.c: Replace all occurences of exit() in potential library
	functions by appropriate return values
	* avrftdi.c: (Dito.)
	* bitbang.c: (Dito.)
	* bitbang.h: (Dito.)
	* buspirate.c: (Dito.)
	* butterfly.c: (Dito.)
	* config.c: (Dito.)
	* flip2.c: (Dito.)
	* ft245r.c: (Dito.)
	* jtagmkI.c: (Dito.)
	* jtagmkII.c: (Dito.)
	* linuxgpio.c: (Dito.)
	* main.c: (Dito.)
	* par.c: (Dito.)
	* pgm.c: (Dito.)
	* pickit2.c: (Dito.)
	* pindefs.c: (Dito.)
	* pindefs.h: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* serbb_posix.c: (Dito.)
	* serbb_win32.c: (Dito.)
	* stk500.c: (Dito.)
	* stk500v2.c: (Dito.)

2014-05-07  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42310: New part description for AT90PWM216
	* avrdude.conf.in: added pwm216 entry

2014-05-07  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42158: Linux GPIO - Source Typo
	* pindefs.h: fixed typo

2014-04-14  Rene Liebscher <R.Liebscher@gmx.de>

	bug #42056: double free or corruption triggered at exit
	* pgm.c: copy usbpid list in pgm_dup

2014-04-05  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* avrdude.1: Remove the note that users might edit the system-wide
	config file.  This file will be overwritten by the next
	installation, so it's not a good idea to manually modify it.
	Using the -C +file option is a much better way for user
	modifications.
	* doc/avrdude.texi: (Dito.)
	* avrdude.conf.in: Add a warning to not modify the file manually.

2014-03-13  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* configure.ac (AC_INIT): Bump version for post-6.1.

2014-03-12  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* configure.ac (AC_INIT): Bump version to 6.1.

2014-03-12  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* pgm.c (pgm_free): Cleanup police: destroy the p->usbpid
	list when freeing the programmer struct.

2014-03-12  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	bug #40782: Verify errors for object size > 16 k on x32e5 due
	to typo in avrdude.conf
	* avrdude.conf.in (ATmega8E5, ATmega32E5): fix boot location

2014-02-28  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* avrdude.conf.in (atmelice, atmelice_pdi, atmelice_dw, atmelice_isp):
	New entries.
	* avrdude.1: Document the Atmel-ICE addition.
	* doc/avrdude.texi: (Dito.)
	* usbdevs.c (USB_DEVICE_ATMEL_ICE): New entry.

2014-02-28  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* main.c: Bump copyright year.

2014-02-28  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* jtag3.c (jtag3_recv): avoid memmov'ing more data than available

2014-02-27  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* avrdude.1: Documentation update for EDBG.
	* doc/avrdude.texi: (Dito.)

2014-02-27  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* jtag3.c: For EDBG protocol, always use 512-byte block I/O.  The
	lower layers will split this according to the EP's maxsize.  This
	makes it work over USB 1.1 connections (albeit very slowly, due to
	the interrupt transfers used).

2014-02-27  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* config_gram.y: Turn the usbpid parameter of the programmer into
	a list of PIDs.  Make the JTAGICE3 programmer handle a list of
	PIDs, by trying each of them in sequence.  Use a single, central
	jtag3_open_common() function to handle the common code of all
	jtag3_open_* functions.  Centralize all USB VID/PID definitions in
	usbdevs.h.
	* flip1.c: (Dito.)
	* ft245r.c: (Dito.)
	* stk500v2.c: (Dito.)
	* jtag3.c: (Dito.)
	* jtag3.h: (Dito.)
	* flip2.c: (Dito.)
	* usbdevs.h: (Dito.)
	* pgm.c: (Dito.)
	* serial.h: (Dito.)
	* pgm.h: (Dito.)
	* usbtiny.c: (Dito.)
	* usbasp.c: (Dito.)
	* avrftdi.c: (Dito.)
	* usbtiny.h: (Dito.)
	* avrdude.conf.in: (Dito.)
	* usbasp.h: (Dito.)
	* usb_libusb.c: (Dito.)

2014-02-27  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* usb_libusb.c (usbdev_open): Replace all calls to exit(1) by
	return -1

2014-02-26  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* jtag3_private.h: Add EDBG/CMSIS-DAP specific constants.
	* jtag3.c: Add EDBG/CMSIS-DAP protocol implementation.
	* serial.h: (Dito.)
	* usbdevs.h: (Dito.)
	* usb_libusb.c: (Dito.)
	* configure.ac: (Dito.)
	* avrdude.conf.in: Add JTAGICE3 and XplainedPro entries using
	EDBG.
	* configure.ac: Bump version date.

2014-02-22  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* usb_libusb.c (usbdev_recv_frame): Fix a bug where a new recv
	request was issued even though all desired data had aldready
	been received.

2014-02-21  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* serial.h: Change the second parameter of the ser_open method
	from "baud" into a "union pinfo", so the USB parameters can be
	passed without hacks.
	* arduino.c: (Dito.)
	* avr910.c: (Dito.)
	* buspirate.c: (Dito.)
	* butterfly.c: (Dito.)
	* jtag3.c: (Dito.)
	* jtagmkI.c: (Dito.)
	* jtagmkII.c: (Dito.)
	* ser_avrdoper.c: (Dito.)
	* ser_posix.c: (Dito.)
	* ser_win32.c: (Dito.)
	* stk500.c: (Dito.)
	* stk500v2.c: (Dito.)
	* usb_libusb.c: (Dito.)
	* wiring.c: (Dito.)

2014-01-30  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	[bug #41402] dfu.c missing include <stdint.h>
	* dfu.c: include <stdint.h> where uint16_t is defined

2014-01-28  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* avrdude.conf.in (ATmega256RFR2 et al.): Fix EEPROM size.

2014-01-27  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	[bug #41357] OS X: Avrdude messes with the usb stack?
	* usb_libusb.c (usbdev_close): Only issue the usb_reset() for
	Linux systems, as these are the only ones that seem to require
	it under some circumstances.

2014-01-22  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* configure.ac (libelf): check against elf_getshdrstrndx() rather
	than just elf_begin() only, so it is clear we found a sufficiently
	recent libelf to work with.

2014-01-22  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	Contributed by Alan Horstmann:
	bug #40897: AT Mega2560 not correctly programmed with stk500(v1) ISP (solution patch)
	* stk500.c: Implement extended address byte handling.
	* avrdude.conf.in (ATmega2560): enable stk500_devcode so
	STK500v1 protocol actually starts at all.

2014-01-17  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* flip1.c: Implement the meat of FLIP version 1 protocol.
	* avrdude.1: Document the new protocol.
	* doc/avrdude.texi: (Dito.)

2014-01-17  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* flip2.c (flip2_page_erase): Remove unimplemented function.
	* dfu.h: Correctly conditionalize <usb.h> vs. <lusb0_usb.h>;
	add adjustable timeout (struct dfu_dev); add dfu_abort()
	* dfu.c (dfu_abort): New function; implement adjustable timeout.

2014-01-17  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* configure.ac (libhid): Turn from AC_TRY_RUN into
	AC_TRY_COMPILE, so it also works for cross-compilation
	setups.

2014-01-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* dfu.c (dfu_init): Move the descriptor checks up into the
	FLIP protocol implementation.
	* flip2.c (flip2_initialize): (Dito.)
	* flip1.c (flip1_initialize): (Dito.)

2014-01-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* flip2.c: Rename from flip.c
	* flip2.h: Rename from flip.h
	* Makefile.am: Reflect the renaming.
	* dfu.c: Update information how to get GPL.
	* dfu.h: (Dito.)

2014-01-16  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* flip.c (flip2_initialize): Check user is running on an Xmega
	device.

2014-01-15  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* flip.c: Added some verbose-level messages (-vv)
	* dfu.c: Added some verbose-level messages (-vvvv)

2014-01-15  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	Submitted by Kirill Levchenko:
	patch #7896: DFU FLIPv2 programming support
	* pgm_type.c: Add the flip2 programmer type.
	* config_gram.y: Allow for the usbid keyword in a device definition.
	* avrdude.conf.in: Add usbpid values to those Xmega devices where
	applicable.
	* avrpart.h: Add usbpid device field.
	* dfu.c: (New file.)
	* dfu.h: (New file.)
	* flip.c: (New file.)
	* flip.h: (New file.)
	* Makefile.am: Add new files.
	* doc/avrdude.texi: Document the changes.
	* avrdude.1: (Dito.)

2014-01-15  Joerg Wunsch <j.gnu@uriah.heep.sax.de>

	* ChangeLog-2013: Annual changelog rotation.