avrdude/jtag3_private.h

/*
 * avrdude - A Downloader/Uploader for AVR device programmers
 * Copyright (C) 2012 Joerg Wunsch <j@uriah.heep.sax.de>
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

/* $Id$ */


/*
 * JTAGICE3 definitions
 * Reverse-engineered from various USB traces.
 */

#if !defined(JTAG3_PRIVATE_EXPORTED)
/*
 * Communication with the JTAGICE3 uses three data endpoints:
 *
 * Endpoint 0x01 (OUT) and 0x82 (IN) are the usual conversation
 * endpoints, with a maximal packet size of 512 octets.  The
 * JTAGICE3 does *not* work on older USB 1.1 hubs that would only
 * allow for 64-octet max packet size.
 *
 * Endpoint 0x83 (IN) is also a bulk endpoint, with a max packetsize
 * of 64 octets.  This endpoint is used by the ICE to deliver events
 * from the ICE.
 *
 * The request (host -> ICE, EP 0x01) format is:
 *
 *  +---------------------------------------------
 *  |   0   |  1  |  2 . 3 |  4  |  5  |  6  | ...
 *  |       |     |        |     |     |     |
 *  | token |dummy|serial# |scope| cmd |dummy| optional data
 *  | 0x0e  |  0  |  NNNN  | SS  | CC  |  0  | ...
 *  +---------------------------------------------
 *
 * Both dummy bytes are always 0.  The "scope" identifier appears
 * to distinguish commands (responses, events, parameters) roughly:
 *
 * 0x01 - general scope ("hello", "goodbye", firmware info, target
 *        voltage readout)
 * 0x11 - scope for AVR in ISP mode (basically a wrapper around
 *        the AVRISPmkII commands, as usual)
 * 0x12 - scope for AVR (JTAG, PDI, debugWIRE)
 *
 * The serial number is counted up.
 *
 *
 * The response (ICE -> host, EP 0x82) format is:
 *
 *  +--------------------------------------------------+
 *  |   0   |  1 . 2 |  3  |  4  | ...           |  N  |
 *  |       |        |     |     |               |     |
 *  | token |serial# |scope| rsp | optional data |dummy|
 *  | 0x0e  |  NNNN  | SS  | RR  | ...           |  0  |
 *  +--------------------------------------------------+
 *
 * The response's serial number is mirrored from the request, but the
 * dummy byte before the serial number is left out.  However, another
 * zero dummy byte is always attached to the end of the response data.
 * Response codes are similar to the JTAGICEmkII, 0x80 is a generic
 * "OK" response, other responses above 0x80 indicate various data
 * responses (parameter read, memory read, PC value), and 0xa0 is a
 * generic "failure" response.  It appears the failure response gets
 * another byte appended (probably indicating the reason) after the
 * 0 dummy byte, but there's not enough analysis material so far.
 *
 *
 * The event format (EP 0x83) is:
 *
 *  +----------------------------------------
 *  |   0   |  1  |  2 . 3 |  4  |  5  | ...
 *  |       |     |        |     |     |
 *  | token |dummy|serial# |scope| evt | data
 *  | 0x0e  |  0  |  NNNN  | SS  | EV  | ...
 *  +----------------------------------------
 */
#define TOKEN 0x0e

#endif /* JTAG3_PRIVATE_EXPORTED */

#define SCOPE_INFO                 0x00
#define SCOPE_GENERAL              0x01
#define SCOPE_AVR_ISP              0x11
#define SCOPE_AVR                  0x12

/* Info scope */
#define CMD3_GET_INFO              0x00

/* byte after GET_INFO is always 0, next is: */
#  define CMD3_INFO_NAME           0x80 /* JTAGICE3 */
#  define CMD3_INFO_SERIAL         0x81 /* J3xxxxxxxxxx */

/* Generic scope */
#define CMD3_SET_PARAMETER         0x01
#define CMD3_GET_PARAMETER         0x02
#define CMD3_SIGN_ON               0x10
#define CMD3_SIGN_OFF              0x11 /* takes one parameter? */
#define CMD3_START_DW_DEBUG        0x13
#define CMD3_MONCON_DISABLE        0x17

/* AVR ISP scope: no commands of its own */

/* AVR scope */
//#define CMD3_SET_PARAMETER       0x01
//#define CMD3_GET_PARAMETER       0x02
//#define CMD3_SIGN_ON             0x10 /* an additional signon/-off pair */
//#define CMD3_SIGN_OFF            0x11
#define CMD3_ENTER_PROGMODE        0x15
#define CMD3_LEAVE_PROGMODE        0x16
#define CMD3_ERASE_MEMORY          0x20
#define CMD3_READ_MEMORY           0x21
#define CMD3_WRITE_MEMORY          0x23
#define CMD3_READ_PC               0x35

/* ICE responses */
#define RSP3_OK                    0x80
#define RSP3_INFO                  0x81
#define RSP3_PC                    0x83
#define RSP3_DATA                  0x84
#define RSP3_FAILED                0xA0

#define RSP3_STATUS_MASK           0xE0

/* possible failure codes that could be appended to RSP3_FAILED: */
#  define RSP3_FAIL_DEBUGWIRE           0x10
#  define RSP3_FAIL_PDI                 0x1B
#  define RSP3_FAIL_NO_ANSWER           0x20
#  define RSP3_FAIL_NO_TARGET_POWER     0x22
#  define RSP3_FAIL_WRONG_MODE          0x32 /* progmode vs. non-prog */
#  define RSP3_FAIL_UNSUPP_MEMORY       0x34 /* unsupported memory type */
#  define RSP3_FAIL_WRONG_LENGTH        0x35 /* wrong lenth for mem access */
#  define RSP3_FAIL_NOT_UNDERSTOOD      0x91

/* ICE events */
#define EVT3_BREAK                 0x40 /* AVR scope */
#define EVT3_SLEEP                 0x11 /* General scope, also wakeup */
#define EVT3_POWER                 0x10 /* General scope */

/* memory types */
#define MTYPE_SRAM        0x20	/* target's SRAM or [ext.] IO registers */
#define MTYPE_EEPROM      0x22	/* EEPROM, what way? */
#define MTYPE_SPM         0xA0	/* flash through LPM/SPM */
#define MTYPE_FLASH_PAGE  0xB0	/* flash in programming mode */
#define MTYPE_EEPROM_PAGE 0xB1	/* EEPROM in programming mode */
#define MTYPE_FUSE_BITS   0xB2	/* fuse bits in programming mode */
#define MTYPE_LOCK_BITS   0xB3	/* lock bits in programming mode */
#define MTYPE_SIGN_JTAG   0xB4	/* signature in programming mode */
#define MTYPE_OSCCAL_BYTE 0xB5	/* osccal cells in programming mode */
#define MTYPE_FLASH       0xc0	/* xmega (app.) flash - undocumented in AVR067 */
#define MTYPE_BOOT_FLASH  0xc1	/* xmega boot flash - undocumented in AVR067 */
#define MTYPE_USERSIG     0xc5	/* xmega user signature - undocumented in AVR067 */
#define MTYPE_PRODSIG     0xc6	/* xmega production signature - undocumented in AVR067 */

/*
 * Parameters are divided into sections, where the section number
 * precedes each parameter address.  There are distinct parameter
 * sets for generic and AVR scope.
 */
#define PARM3_HW_VER      0x00  /* section 0, generic scope, 1 byte */
#define PARM3_FW_MAJOR    0x01  /* section 0, generic scope, 1 byte */
#define PARM3_FW_MINOR    0x02  /* section 0, generic scope, 1 byte */
#define PARM3_FW_RELEASE  0x03  /* section 0, generic scope, 1 byte;
                                 * always asked for by Atmel Studio,
                                 * but never displayed there */
#define PARM3_VTARGET     0x00  /* section 1, generic scope, 2 bytes,
                                 * in millivolts */
#define PARM3_DEVICEDESC  0x00  /* section 2, memory etc. configuration,
                                 * 31 bytes for tiny/mega AVR, 47 bytes
                                 * for Xmega; is also used in command
                                 * 0x36 in JTAGICEmkII, starting with
                                 * firmware 7.x */

#define PARM3_ARCH        0x00  /* section 0, AVR scope, 1 byte */
#  define PARM3_ARCH_TINY   1   /* also small megaAVR with ISP/DW only */
#  define PARM3_ARCH_MEGA   2
#  define PARM3_ARCH_XMEGA  3

#define PARM3_SESS_PURPOSE 0x01 /* section 0, AVR scope, 1 byte */
#  define PARM3_SESS_PROGRAMMING 1
#  define PARM3_SESS_DEBUGGING   2

#define PARM3_CONNECTION  0x00  /* section 1, AVR scope, 1 byte */
#  define PARM3_CONN_ISP    1
#  define PARM3_CONN_JTAG   4
#  define PARM3_CONN_DW     5
#  define PARM3_CONN_PDI    6


#define PARM3_JTAGCHAIN   0x01  /* JTAG chain info, AVR scope (units
                                 * before/after, bits before/after), 4
                                 * bytes */

#define PARM3_CLK_MEGA_PROG  0x20 /* section 1, AVR scope, 2 bytes (kHz) */
#define PARM3_CLK_MEGA_DEBUG 0x21 /* section 1, AVR scope, 2 bytes (kHz) */
#define PARM3_CLK_XMEGA_JTAG 0x30 /* section 1, AVR scope, 2 bytes (kHz) */
#define PARM3_CLK_XMEGA_PDI  0x31 /* section 1, AVR scope, 2 bytes (kHz) */



/* Xmega erase memory types, for CMND_XMEGA_ERASE */
#define XMEGA_ERASE_CHIP        0x00
#define XMEGA_ERASE_APP         0x01
#define XMEGA_ERASE_BOOT        0x02
#define XMEGA_ERASE_EEPROM      0x03
#define XMEGA_ERASE_APP_PAGE    0x04
#define XMEGA_ERASE_BOOT_PAGE   0x05
#define XMEGA_ERASE_EEPROM_PAGE 0x06
#define XMEGA_ERASE_USERSIG     0x07

#if !defined(JTAG3_PRIVATE_EXPORTED)

struct mega_device_desc {
    unsigned char flash_page_size[2];   // in bytes
    unsigned char flash_size[4];        // in bytes
    unsigned char dummy1[4];            // always 0
    unsigned char boot_address[4];      // maximal (BOOTSZ = 3) bootloader
                                        // address, in 16-bit words (!)
    unsigned char sram_offset[2];       // pointing behind IO registers
    unsigned char eeprom_size[2];
    unsigned char eeprom_page_size;
    unsigned char ocd_revision;         // see XML; basically:
                                        // t13*, t2313*, t4313:        0
                                        // all other DW devices:       1
                                        // ATmega128(A):               1 (!)
                                        // ATmega16*,162,169*,32*,64*: 2
                                        // ATmega2560/2561:            4
                                        // all other megaAVR devices:  3
    unsigned char always_one;           // always = 1
    unsigned char allow_full_page_bitstream; // old AVRs, see XML
    unsigned char dummy2[2];            // always 0
                                        // all IO addresses below are given
                                        // in IO number space (without
                                        // offset 0x20), even though e.g.
                                        // OSCCAL always resides outside
    unsigned char idr_address;          // IDR, aka. OCDR
    unsigned char eearh_address;        // EEPROM access
    unsigned char eearl_address;
    unsigned char eecr_address;
    unsigned char eedr_address;
    unsigned char spmcr_address;
    unsigned char osccal_address;
};


/* Xmega device descriptor */
struct xmega_device_desc {
    unsigned char nvm_app_offset[4];	// NVM offset for application flash
    unsigned char nvm_boot_offset[4];	// NVM offset for boot flash
    unsigned char nvm_eeprom_offset[4]; // NVM offset for EEPROM
    unsigned char nvm_fuse_offset[4];	// NVM offset for fuses
    unsigned char nvm_lock_offset[4];	// NVM offset for lock bits
    unsigned char nvm_user_sig_offset[4]; // NVM offset for user signature row
    unsigned char nvm_prod_sig_offset[4]; // NVM offset for production sign. row
    unsigned char nvm_data_offset[4];	// NVM offset for data memory (SRAM + IO)
    unsigned char app_size[4];		// size of application flash
    unsigned char boot_size[2];		// size of boot flash
    unsigned char flash_page_size[2];	// flash page size
    unsigned char eeprom_size[2];	// size of EEPROM
    unsigned char eeprom_page_size;	// EEPROM page size
    unsigned char nvm_base_addr[2];	// IO space base address of NVM controller
    unsigned char mcu_base_addr[2];	// IO space base address of MCU control
};
#endif /* JTAG3_PRIVATE_EXPORTED */