avrdude/pgm.h

139 lines
5.4 KiB
C
Raw Normal View History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2002-2004 Brian S. Dean <bsd@bsdhome.com>
* Copyright 2007 Joerg Wunsch <j@uriah.heep.sax.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* $Id$ */
#ifndef pgm_h
#define pgm_h
#include <limits.h>
#include "avrpart.h"
#include "lists.h"
#include "pindefs.h"
#include "serial.h"
#define ON 1
#define OFF 0
#define PGM_DESCLEN 80
#define PGM_PORTLEN PATH_MAX
#define PGM_TYPELEN 32
#define PGM_USBSTRINGLEN 256
typedef enum {
EXIT_VCC_UNSPEC,
EXIT_VCC_ENABLED,
EXIT_VCC_DISABLED
} exit_vcc_t;
typedef enum {
EXIT_RESET_UNSPEC,
EXIT_RESET_ENABLED,
EXIT_RESET_DISABLED
} exit_reset_t;
typedef struct programmer_t {
LISTID id;
char desc[PGM_DESCLEN];
char type[PGM_TYPELEN];
char port[PGM_PORTLEN];
unsigned int pinno[N_PINS];
exit_vcc_t exit_vcc;
exit_reset_t exit_reset;
int ppidata;
int ppictrl;
int baudrate;
int usbvid, usbpid;
char usbdev[PGM_USBSTRINGLEN], usbsn[PGM_USBSTRINGLEN];
char usbvendor[PGM_USBSTRINGLEN], usbproduct[PGM_USBSTRINGLEN];
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
double bitclock; /* JTAG ICE clock period in microseconds */
int ispdelay; /* ISP clock delay */
union filedescriptor fd;
int page_size; /* page size if the programmer supports paged write/load */
int (*rdy_led) (struct programmer_t * pgm, int value);
int (*err_led) (struct programmer_t * pgm, int value);
int (*pgm_led) (struct programmer_t * pgm, int value);
int (*vfy_led) (struct programmer_t * pgm, int value);
int (*initialize) (struct programmer_t * pgm, AVRPART * p);
void (*display) (struct programmer_t * pgm, const char * p);
void (*enable) (struct programmer_t * pgm);
void (*disable) (struct programmer_t * pgm);
void (*powerup) (struct programmer_t * pgm);
void (*powerdown) (struct programmer_t * pgm);
int (*program_enable) (struct programmer_t * pgm, AVRPART * p);
int (*chip_erase) (struct programmer_t * pgm, AVRPART * p);
int (*cmd) (struct programmer_t * pgm, unsigned char cmd[4],
unsigned char res[4]);
int (*cmd_tpi) (struct programmer_t * pgm, unsigned char cmd[],
int cmd_len, unsigned char res[], int res_len);
int (*spi) (struct programmer_t * pgm, unsigned char cmd[],
unsigned char res[], int count);
int (*open) (struct programmer_t * pgm, char * port);
void (*close) (struct programmer_t * pgm);
int (*paged_write) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes);
int (*paged_load) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes);
void (*write_setup) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m);
int (*write_byte) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char value);
int (*read_byte) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char * value);
int (*read_sig_bytes) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m);
void (*print_parms) (struct programmer_t * pgm);
int (*set_vtarget) (struct programmer_t * pgm, double v);
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
int (*set_varef) (struct programmer_t * pgm, unsigned int chan, double v);
int (*set_fosc) (struct programmer_t * pgm, double v);
int (*set_sck_period) (struct programmer_t * pgm, double v);
int (*setpin) (struct programmer_t * pgm, int pin, int value);
int (*getpin) (struct programmer_t * pgm, int pin);
int (*highpulsepin) (struct programmer_t * pgm, int pin);
int (*parseexitspecs) (struct programmer_t * pgm, char *s);
int (*perform_osccal) (struct programmer_t * pgm);
int (*parseextparams) (struct programmer_t * pgm, LISTID xparams);
void (*setup) (struct programmer_t * pgm);
void (*teardown) (struct programmer_t * pgm);
char config_file[PATH_MAX]; /* config file where defined */
int lineno; /* config file line number */
void *cookie; /* for private use by the programmer */
char flag; /* for private use of the programmer */
} PROGRAMMER;
#ifdef __cplusplus
extern "C" {
#endif
PROGRAMMER * pgm_new(void);
void programmer_display(PROGRAMMER * pgm, const char * p);
PROGRAMMER * locate_programmer(LISTID programmers, const char * configid);
typedef void (*walk_programmers_cb)(const char *name, const char *desc,
const char *cfgname, int cfglineno,
void *cookie);
void walk_programmers(LISTID programmers, walk_programmers_cb cb, void *cookie);
#ifdef __cplusplus
}
#endif
#endif