avrdude/usbasp.c

/*
 * avrdude - A Downloader/Uploader for AVR device programmers
 * Copyright (C) 2006  Thomas Fischl
 * Copyright 2007 Joerg Wunsch <j@uriah.heep.sax.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

/* $Id$ */

/*
 * Interface to the USBasp programmer.
 *
 * See http://www.fischl.de/usbasp/
 */
#include "ac_cfg.h"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/time.h>
#include <unistd.h>

#include "avrdude.h"
#include "avr.h"
#include "pgm.h"
#include "usbasp.h"

#if defined(HAVE_LIBUSB) || defined(HAVE_LIBUSB_1_0)

#ifdef HAVE_LIBUSB_1_0
# define USE_LIBUSB_1_0
#endif

#if defined(USE_LIBUSB_1_0)
# if defined(HAVE_LIBUSB_1_0_LIBUSB_H)
#  include <libusb-1.0/libusb.h>
# else
#  include <libusb.h>
# endif
#else
# include <usb.h>
#endif

#ifdef USE_LIBUSB_1_0

static libusb_context *ctx = NULL;

static int libusb_to_errno(int result)
{
	switch (result) {
	case LIBUSB_SUCCESS:
		return 0;
	case LIBUSB_ERROR_IO:
		return EIO;
	case LIBUSB_ERROR_INVALID_PARAM:
		return EINVAL;
	case LIBUSB_ERROR_ACCESS:
		return EACCES;
	case LIBUSB_ERROR_NO_DEVICE:
		return ENXIO;
	case LIBUSB_ERROR_NOT_FOUND:
		return ENOENT;
	case LIBUSB_ERROR_BUSY:
		return EBUSY;
	case LIBUSB_ERROR_TIMEOUT:
		return ETIMEDOUT;
	case LIBUSB_ERROR_OVERFLOW:
		return EOVERFLOW;
	case LIBUSB_ERROR_PIPE:
		return EPIPE;
	case LIBUSB_ERROR_INTERRUPTED:
		return EINTR;
	case LIBUSB_ERROR_NO_MEM:
		return ENOMEM;
	case LIBUSB_ERROR_NOT_SUPPORTED:
		return ENOSYS;
	default:
		return ERANGE;
	}
}

#endif


/*
 * Private data for this programmer.
 */
struct pdata
{
#ifdef USE_LIBUSB_1_0
  libusb_device_handle *usbhandle;
#else
  usb_dev_handle *usbhandle;
#endif
  int sckfreq_hz; 
};

#define PDATA(pgm) ((struct pdata *)(pgm->cookie))

static void usbasp_setup(PROGRAMMER * pgm)
{
  if ((pgm->cookie = malloc(sizeof(struct pdata))) == 0) {
    fprintf(stderr,
	    "%s: usbasp_setup(): Out of memory allocating private data\n",
	    progname);
    exit(1);
  }
  memset(pgm->cookie, 0, sizeof(struct pdata));
}

static void usbasp_teardown(PROGRAMMER * pgm)
{
  free(pgm->cookie);
}


/*
 * wrapper for usb_control_msg call
 */
static int usbasp_transmit(PROGRAMMER * pgm,
			   unsigned char receive, unsigned char functionid,
			   unsigned char send[4], unsigned char * buffer, int buffersize)
{
  int nbytes;
#ifdef USE_LIBUSB_1_0
  nbytes = libusb_control_transfer(PDATA(pgm)->usbhandle,
				   (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | (receive << 7)) & 0xff,
				   functionid & 0xff, 
				   ((send[1] << 8) | send[0]) &  0xffff, 
				   ((send[3] << 8) | send[2]) & 0xffff, 
				   (char *)buffer, 
				   buffersize & 0xffff,
				   5000);
  if(nbytes < 0){
    fprintf(stderr, "%s: error: usbasp_transmit: %s\n", progname, strerror(libusb_to_errno(nbytes)));
    exit(1);
  }
#else
  nbytes = usb_control_msg(PDATA(pgm)->usbhandle,
			   USB_TYPE_VENDOR | USB_RECIP_DEVICE | (receive << 7),
			   functionid,
			   (send[1] << 8) | send[0],
			   (send[3] << 8) | send[2],
			   (char *)buffer, buffersize,
			   5000);
  if(nbytes < 0){
    fprintf(stderr, "%s: error: usbasp_transmit: %s\n", progname, usb_strerror());
    exit(1);
  }
#endif
  return nbytes;
}


/*
 * Try to open USB device with given VID, PID, vendor and product name
 * Parts of this function were taken from an example code by OBJECTIVE
 * DEVELOPMENT Software GmbH (www.obdev.at) to meet conditions for
 * shared VID/PID
 */
#ifdef USE_LIBUSB_1_0
static int usbOpenDevice(libusb_device_handle **device, int vendor,
			 char *vendorName, int product, char *productName)
{
    libusb_device_handle *handle = NULL;
    int                  errorCode = USB_ERROR_NOTFOUND;
    static int           didUsbInit = 0;
    int j;
    int r;

    if(!didUsbInit){
        didUsbInit = 1;
        libusb_init(&ctx);
    }
    
    libusb_device **dev_list;
    int dev_list_len = libusb_get_device_list(ctx, &dev_list);

    for (j=0; j<dev_list_len; ++j) {
        libusb_device *dev = dev_list[j];
        struct libusb_device_descriptor descriptor;
	libusb_get_device_descriptor(dev, &descriptor);
	if (descriptor.idVendor == vendor && descriptor.idProduct == product) {
            char    string[256];
	    /* we need to open the device in order to query strings */
            r = libusb_open(dev, &handle);
            if (!handle) {
                 errorCode = USB_ERROR_ACCESS;
                 fprintf(stderr,
			    "%s: Warning: cannot open USB device: %s\n",
			    progname, strerror(libusb_to_errno(r)));
                    continue;
                }
                if (vendorName == NULL && productName == NULL) {
		    /* name does not matter */
                    break;
                }
                /* now check whether the names match: */
		r = libusb_get_string_descriptor_ascii(handle, descriptor.iManufacturer & 0xff, string, sizeof(string));
                if (r < 0) {
                    errorCode = USB_ERROR_IO;
                    fprintf(stderr,
			    "%s: Warning: cannot query manufacturer for device: %s\n",
			    progname, strerror(libusb_to_errno(r)));
                } else {
                    errorCode = USB_ERROR_NOTFOUND;
		    if (verbose > 1)
		        fprintf(stderr,
				"%s: seen device from vendor ->%s<-\n",
				progname, string);
                    if (strcmp(string, vendorName) == 0){
			r = libusb_get_string_descriptor_ascii(handle, descriptor.iProduct & 0xff, string, sizeof(string));
                        if (r < 0) {
                            errorCode = USB_ERROR_IO;
                            fprintf(stderr,
				    "%s: Warning: cannot query product for device: %s\n",
				    progname, strerror(libusb_to_errno(r)));
                        } else {
                            errorCode = USB_ERROR_NOTFOUND;
			    if (verbose > 1)
			        fprintf(stderr,
					"%s: seen product ->%s<-\n",
					progname, string);
                            if(strcmp(string, productName) == 0)
                                break;
                        }
                    }
                }
                libusb_close(handle);
                handle = NULL;
            }
    }
    if (handle != NULL){
        errorCode = 0;
        *device = handle;
    }
    return errorCode;
}
#else
static int usbOpenDevice(usb_dev_handle **device, int vendor,
			 char *vendorName, int product, char *productName)
{
struct usb_bus       *bus;
struct usb_device    *dev;
usb_dev_handle       *handle = NULL;
int                  errorCode = USB_ERROR_NOTFOUND;
static int           didUsbInit = 0;

    if(!didUsbInit){
        didUsbInit = 1;
        usb_init();
    }
    usb_find_busses();
    usb_find_devices();
    for(bus=usb_get_busses(); bus; bus=bus->next){
        for(dev=bus->devices; dev; dev=dev->next){
            if(dev->descriptor.idVendor == vendor &&
	       dev->descriptor.idProduct == product){
                char    string[256];
                int     len;
		/* we need to open the device in order to query strings */
                handle = usb_open(dev);
                if(!handle){
                    errorCode = USB_ERROR_ACCESS;
                    fprintf(stderr,
			    "%s: Warning: cannot open USB device: %s\n",
			    progname, usb_strerror());
                    continue;
                }
                if(vendorName == NULL && productName == NULL){
		    /* name does not matter */
                    break;
                }
                /* now check whether the names match: */
                len = usb_get_string_simple(handle, dev->descriptor.iManufacturer,
					    string, sizeof(string));
                if(len < 0){
                    errorCode = USB_ERROR_IO;
                    fprintf(stderr,
			    "%s: Warning: cannot query manufacturer for device: %s\n",
			    progname, usb_strerror());
                }else{
                    errorCode = USB_ERROR_NOTFOUND;
		    if (verbose > 1)
		        fprintf(stderr,
				"%s: seen device from vendor ->%s<-\n",
				progname, string);
                    if(strcmp(string, vendorName) == 0){
                        len = usb_get_string_simple(handle, dev->descriptor.iProduct,
						    string, sizeof(string));
                        if(len < 0){
                            errorCode = USB_ERROR_IO;
                            fprintf(stderr,
				    "%s: Warning: cannot query product for device: %s\n",
				    progname, usb_strerror());
                        }else{
                            errorCode = USB_ERROR_NOTFOUND;
			    if (verbose > 1)
			        fprintf(stderr,
					"%s: seen product ->%s<-\n",
					progname, string);
                            if(strcmp(string, productName) == 0)
                                break;
                        }
                    }
                }
                usb_close(handle);
                handle = NULL;
            }
        }
        if(handle)
            break;
    }
    if(handle != NULL){
        errorCode = 0;
        *device = handle;
    }
    return errorCode;
}
#endif

static int usbasp_open(PROGRAMMER * pgm, char * port)
{
#ifdef USE_LIBUSB_1_0
  libusb_init(&ctx);
#else
  usb_init();
#endif
  if(strcasecmp(port, "nibobee") == 0) {
    if (usbOpenDevice(&PDATA(pgm)->usbhandle, USBASP_NIBOBEE_VID, "www.nicai-systems.com",
		    USBASP_NIBOBEE_PID, "NIBObee") != 0) {
      fprintf(stderr,
	      "%s: error: could not find USB device "
	      "\"NIBObee\" with vid=0x%x pid=0x%x\n",
  	      progname, USBASP_NIBOBEE_VID, USBASP_NIBOBEE_PID);
      exit(1);
      
    }
  } else if (usbOpenDevice(&PDATA(pgm)->usbhandle, USBASP_SHARED_VID, "www.fischl.de",
		    USBASP_SHARED_PID, "USBasp") != 0) {

    /* check if device with old VID/PID is available */
    if (usbOpenDevice(&PDATA(pgm)->usbhandle, USBASP_OLD_VID, "www.fischl.de",
		      USBASP_OLD_PID, "USBasp") != 0) {

      /* no USBasp found */
      fprintf(stderr,
	      "%s: error: could not find USB device "
	      "\"USBasp\" with vid=0x%x pid=0x%x\n",
  	      progname, USBASP_SHARED_VID, USBASP_SHARED_PID);
      exit(1);

    } else {

      /* found USBasp with old IDs */
      fprintf(stderr,
	      "%s: Warning: Found USB device \"USBasp\" with "
	      "old VID/PID! Please update firmware of USBasp!\n",
  	      progname);
    }
  }

  return 0;
}


static void usbasp_close(PROGRAMMER * pgm)
{
  unsigned char temp[4];
  memset(temp, 0, sizeof(temp));
  usbasp_transmit(pgm, 1, USBASP_FUNC_DISCONNECT, temp, temp, sizeof(temp));

#ifdef USE_LIBUSB_1_0
  libusb_close(PDATA(pgm)->usbhandle);
#else
  usb_close(PDATA(pgm)->usbhandle);
#endif
}


static int usbasp_initialize(PROGRAMMER * pgm, AVRPART * p)
{

  unsigned char temp[4];
  memset(temp, 0, sizeof(temp));

  /* set sck period */
  pgm->set_sck_period(pgm, pgm->bitclock);

  /* connect to target device */
  usbasp_transmit(pgm, 1, USBASP_FUNC_CONNECT, temp, temp, sizeof(temp));

  /* wait, so device is ready to receive commands */
  usleep(100000);

  return pgm->program_enable(pgm, p);
}

static void usbasp_disable(PROGRAMMER * pgm)
{
  /* Do nothing. */

  return;
}

static void usbasp_enable(PROGRAMMER * pgm)
{
  /* Do nothing. */

  return;
}

static void usbasp_display(PROGRAMMER * pgm, const char * p)
{
  return;
}


static int usbasp_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
                   unsigned char res[4])
{
  int nbytes =
    usbasp_transmit(pgm, 1, USBASP_FUNC_TRANSMIT, cmd, res, sizeof(res));

  if(nbytes != 4){
    fprintf(stderr, "%s: error: wrong responds size\n",
	    progname);
    return -1;
  }

  return 0;
}


static int usbasp_program_enable(PROGRAMMER * pgm, AVRPART * p)
{
  unsigned char res[4];
  unsigned char cmd[4];
  memset(cmd, 0, sizeof(cmd));
  memset(res, 0, sizeof(res));

  cmd[0] = 0;

  int nbytes =
    usbasp_transmit(pgm, 1, USBASP_FUNC_ENABLEPROG, cmd, res, sizeof(res));

  if ((nbytes != 1) | (res[0] != 0)) {
    fprintf(stderr, "%s: error: programm enable: target doesn't answer. %x \n",
	    progname, res[0]);
    return -1;
  }

  return 0;
}


static int usbasp_chip_erase(PROGRAMMER * pgm, AVRPART * p)
{
  unsigned char cmd[4];
  unsigned char res[4];

  if (p->op[AVR_OP_CHIP_ERASE] == NULL) {
    fprintf(stderr, "chip erase instruction not defined for part \"%s\"\n",
            p->desc);
    return -1;
  }

  memset(cmd, 0, sizeof(cmd));

  avr_set_bits(p->op[AVR_OP_CHIP_ERASE], cmd);
  pgm->cmd(pgm, cmd, res);
  usleep(p->chip_erase_delay);
  pgm->initialize(pgm, p);

  return 0;
}


static int usbasp_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
                             int page_size, int n_bytes)
{
  int n;
  unsigned char cmd[4];
  int address = 0;
  int wbytes = n_bytes;
  int blocksize;
  unsigned char * buffer = m->buf;
  int function;

  if (strcmp(m->desc, "flash") == 0) {
    function = USBASP_FUNC_READFLASH;
  } else if (strcmp(m->desc, "eeprom") == 0) {
    function = USBASP_FUNC_READEEPROM;
  } else {
    return -2;
  }

  /* set blocksize depending on sck frequency */  
  if ((PDATA(pgm)->sckfreq_hz > 0) && (PDATA(pgm)->sckfreq_hz < 10000)) {
     blocksize = USBASP_READBLOCKSIZE / 10;
  } else {
     blocksize = USBASP_READBLOCKSIZE;
  }

  while (wbytes) {
    if (wbytes <= blocksize) {
      blocksize = wbytes;
    }
    wbytes -= blocksize;

    /* set address (new mode) - if firmware on usbasp support newmode, then they use address from this command */
    unsigned char temp[4];
    memset(temp, 0, sizeof(temp));
    cmd[0] = address & 0xFF;
    cmd[1] = address >> 8;
    cmd[2] = address >> 16;
    cmd[3] = address >> 24;
    usbasp_transmit(pgm, 1, USBASP_FUNC_SETLONGADDRESS, cmd, temp, sizeof(temp));

    /* send command with address (compatibility mode) - if firmware on
	  usbasp doesn't support newmode, then they use address from this */
    cmd[0] = address & 0xFF;
    cmd[1] = address >> 8;
    // for compatibility - previous version of usbasp.c doesn't initialize this fields (firmware ignore it)
    cmd[2] = 0;
    cmd[3] = 0;

    n = usbasp_transmit(pgm, 1, function, cmd, buffer, blocksize);

    if (n != blocksize) {
      fprintf(stderr, "%s: error: wrong reading bytes %x\n",
	      progname, n);
      exit(1);
    }

    buffer += blocksize;
    address += blocksize;

    report_progress (address, n_bytes, NULL);
  }

  return n_bytes;
}

static int usbasp_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
                              int page_size, int n_bytes)
{
  int n;
  unsigned char cmd[4];
  int address = 0;
  int wbytes = n_bytes;
  int blocksize;
  unsigned char * buffer = m->buf;
  unsigned char blockflags = USBASP_BLOCKFLAG_FIRST;
  int function;

  if (strcmp(m->desc, "flash") == 0) {
    function = USBASP_FUNC_WRITEFLASH;
  } else if (strcmp(m->desc, "eeprom") == 0) {
    function = USBASP_FUNC_WRITEEEPROM;
  } else {
    return -2;
  }

  /* set blocksize depending on sck frequency */  
  if ((PDATA(pgm)->sckfreq_hz > 0) && (PDATA(pgm)->sckfreq_hz < 10000)) {
     blocksize = USBASP_WRITEBLOCKSIZE / 10;
  } else {
     blocksize = USBASP_WRITEBLOCKSIZE;
  }

  while (wbytes) {

    if (wbytes <= blocksize) {
      blocksize = wbytes;
      blockflags |= USBASP_BLOCKFLAG_LAST;
    }
    wbytes -= blocksize;


    /* set address (new mode) - if firmware on usbasp support newmode, then
      they use address from this command */
    unsigned char temp[4];
    memset(temp, 0, sizeof(temp));
    cmd[0] = address & 0xFF;
    cmd[1] = address >> 8;
    cmd[2] = address >> 16;
    cmd[3] = address >> 24;
    usbasp_transmit(pgm, 1, USBASP_FUNC_SETLONGADDRESS, cmd, temp, sizeof(temp));

    /* normal command - firmware what support newmode - use address from previous command,
      firmware what doesn't support newmode - ignore previous command and use address from this command */

    cmd[0] = address & 0xFF;
    cmd[1] = address >> 8;
    cmd[2] = page_size & 0xFF;
    cmd[3] = (blockflags & 0x0F) + ((page_size & 0xF00) >> 4); //TP: Mega128 fix
    blockflags = 0;

    n = usbasp_transmit(pgm, 0, function, cmd, buffer, blocksize);

    if (n != blocksize) {
      fprintf(stderr, "%s: error: wrong count at writing %x\n",
	      progname, n);
      exit(1);
    }


    buffer += blocksize;
    address += blocksize;

    report_progress (address, n_bytes, NULL);
  }

  return n_bytes;
}


/* The list of SCK frequencies in Hz supported by USBasp */
static struct sckoptions_t usbaspSCKoptions[] = {
  { USBASP_ISP_SCK_1500, 1500000 },
  { USBASP_ISP_SCK_750, 750000 },
  { USBASP_ISP_SCK_375, 375000 },
  { USBASP_ISP_SCK_187_5, 187500 },
  { USBASP_ISP_SCK_93_75, 93750 },
  { USBASP_ISP_SCK_32, 32000 },
  { USBASP_ISP_SCK_16, 16000 },
  { USBASP_ISP_SCK_8, 8000 },
  { USBASP_ISP_SCK_4, 4000 },
  { USBASP_ISP_SCK_2, 2000 },
  { USBASP_ISP_SCK_1, 1000 },
  { USBASP_ISP_SCK_0_5, 500 }
};


/*
 * Set sck period (in seconds)
 * Find next possible sck period and write it to the programmer.
 */
static int usbasp_set_sck_period(PROGRAMMER *pgm, double sckperiod)
{
  char clockoption = USBASP_ISP_SCK_AUTO;
  unsigned char res[4];
  unsigned char cmd[4];

  memset(cmd, 0, sizeof(cmd));
  memset(res, 0, sizeof(res));

  /* reset global sck frequency to auto */
  PDATA(pgm)->sckfreq_hz = 0;

  if (sckperiod == 0) {
    /* auto sck set */

    if (verbose >= 1)
      fprintf(stderr, "%s: auto set sck period (because given equals null)\n", progname);

  } else {

    int sckfreq = 1 / sckperiod; /* sck in Hz */
    int usefreq = 0;

    if (verbose >= 2)
      fprintf(stderr, "%s: try to set SCK period to %g s (= %i Hz)\n", progname, sckperiod, sckfreq);

    if (sckfreq >= usbaspSCKoptions[0].frequency) {
      clockoption = usbaspSCKoptions[0].id;
      usefreq = usbaspSCKoptions[0].frequency;
    } else {

      /* find clock option next to given clock */
      int i;
      for (i = 0; i < sizeof(usbaspSCKoptions) / sizeof(usbaspSCKoptions[0]); i++) {
        if (sckfreq >= usbaspSCKoptions[i].frequency - 1) { /* subtract 1 to compensate round errors */
          clockoption = usbaspSCKoptions[i].id;
          usefreq = usbaspSCKoptions[i].frequency;
          break;
        }
      }
    }

    /* save used sck frequency */
    PDATA(pgm)->sckfreq_hz = usefreq;

    fprintf(stderr, "%s: set SCK frequency to %i Hz\n", progname, usefreq);
  }

  cmd[0] = clockoption;

  int nbytes =
    usbasp_transmit(pgm, 1, USBASP_FUNC_SETISPSCK, cmd, res, sizeof(res));

  if ((nbytes != 1) | (res[0] != 0)) {
    fprintf(stderr, "%s: warning: cannot set sck period. please check for usbasp firmware update.\n",
      progname);
    return -1;
  }

  return 0;
}


void usbasp_initpgm(PROGRAMMER * pgm)
{
  strcpy(pgm->type, "usbasp");

  /*
   * mandatory functions
   */

  pgm->initialize     = usbasp_initialize;
  pgm->display        = usbasp_display;
  pgm->enable         = usbasp_enable;
  pgm->disable        = usbasp_disable;
  pgm->program_enable = usbasp_program_enable;
  pgm->chip_erase     = usbasp_chip_erase;
  pgm->cmd            = usbasp_cmd;
  pgm->open           = usbasp_open;
  pgm->close          = usbasp_close;
  pgm->read_byte      = avr_read_byte_default;
  pgm->write_byte     = avr_write_byte_default;

  /*
   * optional functions
   */

  pgm->paged_write = usbasp_paged_write;
  pgm->paged_load = usbasp_paged_load;
  pgm->setup          = usbasp_setup;
  pgm->teardown       = usbasp_teardown;
  pgm->set_sck_period	= usbasp_set_sck_period;

}


#else /* HAVE_LIBUSB */

static int usbasp_nousb_open (struct programmer_t *pgm, char * name)
{
  fprintf(stderr, "%s: error: no usb support. please compile again with libusb installed.\n",
	  progname);

  exit(1);
}

void usbasp_initpgm(PROGRAMMER * pgm)
{
  strcpy(pgm->type, "usbasp");

  pgm->open           = usbasp_nousb_open;
}

#endif  /* HAVE_LIBUSB */