avrdude/jtagmkII_private.h

/*
 * avrdude - A Downloader/Uploader for AVR device programmers
 * Copyright (C) 2005, 2006 Joerg Wunsch <j@uriah.heep.sax.de>
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

/* $Id$ */


/*
 * JTAG ICE mkII definitions
 * Taken from Appnote AVR067
 */

#if !defined(JTAGMKII_PRIVATE_EXPORTED)
/*
 * Communication with the JTAG ICE works in frames.  The protocol
 * somewhat resembles the STK500v2 protocol, yet it is sufficiently
 * different to prevent a direct code reuse. :-(
 *
 * Frame format:
 *
 *  +---------------------------------------------------------------+
 *  |   0   |  1  .  2  |  3 . 4 . 5 . 6  |   7   | ... | N-1 .  N  |
 *  |       |           |                 |       |     |           |
 *  | start | LSB   MSB | LSB ....... MSB | token | msg | LSB   MSB |
 *  | 0x1B  | sequence# | message size    | 0x0E  |     |   CRC16   |
 *  +---------------------------------------------------------------+
 *
 * Each request message will be returned by a response with a matching
 * sequence #.  Sequence # 0xffff is reserved for asynchronous event
 * notifications that will be sent by the ICE without a request
 * message (e.g. when the target hit a breakpoint).
 *
 * The message size excludes the framing overhead (10 bytes).
 *
 * The first byte of the message is always the request or response
 * code, which is roughly classified as:
 *
 * . Messages (commands) use 0x00 through 0x3f.  (The documentation
 *   claims that messages start at 0x01, but actually CMND_SIGN_OFF is
 *   0x00.)
 * . Internal commands use 0x40 through 0x7f (not documented).
 * . Success responses use 0x80 through 0x9f.
 * . Failure responses use 0xa0 through 0xbf.
 * . Events use 0xe0 through 0xff.
 */
#define MESSAGE_START 0x1b
#define TOKEN 0x0e

/*
 * Max message size we are willing to accept.  Prevents us from trying
 * to allocate too much VM in case we received a nonsensical packet
 * length.  We have to allocate the buffer as soon as we've got the
 * length information (and thus have to trust that information by that
 * time at first), as the final CRC check can only be done once the
 * entire packet came it.
 */
#define MAX_MESSAGE 100000

#endif /* JTAGMKII_PRIVATE_EXPORTED */

/* ICE command codes */
#define CMND_CHIP_ERASE 0x13
#define CMND_CLEAR_EVENTS 0x22
#define CMND_CLR_BREAK 0x1A
#define CMND_ENTER_PROGMODE 0x14
#define CMND_ERASEPAGE_SPM 0x0D
#define CMND_FORCED_STOP 0x0A
#define CMND_GET_BREAK 0x12
#define CMND_GET_PARAMETER 0x03
#define CMND_GET_SIGN_ON 0x01
#define CMND_GET_SYNC 0x0f
#define CMND_GO 0x08
#define CMND_ISP_PACKET 0x2F
#define CMND_LEAVE_PROGMODE 0x15
#define CMND_READ_MEMORY 0x05
#define CMND_READ_PC 0x07
#define CMND_RESET 0x0B
#define CMND_RESTORE_TARGET 0x23
#define CMND_RUN_TO_ADDR 0x1C
#define CMND_SELFTEST 0x10
#define CMND_SET_BREAK 0x11
#define CMND_SET_DEVICE_DESCRIPTOR 0x0C
#define CMND_SET_N_PARAMETERS 0x16
#define CMND_SET_PARAMETER 0x02
#define CMND_SIGN_OFF 0x00
#define CMND_SINGLE_STEP 0x09
#define CMND_SPI_CMD 0x1D
#define CMND_WRITE_MEMORY 0x04
#define CMND_WRITE_PC 0x06
#define CMND_XMEGA_ERASE 0x34
// AVR32 - DFH
#define CMND_GET_IR 0x24
#define CMND_GET_xxx 0x25
#define CMND_WRITE_SAB 0x28
#define CMND_READ_SAB 0x29
#define CMND_RESET_AVR 0x2B
#define CMND_READ_MEMORY32 0x2C
#define CMND_WRITE_MEMORY32 0x2D


/* ICE responses */
#define RSP_DEBUGWIRE_SYNC_FAILED 0xAC
#define RSP_FAILED 0xA0
#define RSP_GET_BREAK 0x83
#define RSP_ILLEGAL_BREAKPOINT 0xA8
#define RSP_ILLEGAL_COMMAND 0xAA
#define RSP_ILLEGAL_EMULATOR_MODE 0xA4
#define RSP_ILLEGAL_JTAG_ID 0xA9
#define RSP_ILLEGAL_MCU_STATE 0xA5
#define RSP_ILLEGAL_MEMORY_TYPE 0xA2
#define RSP_ILLEGAL_MEMORY_RANGE 0xA3
#define RSP_ILLEGAL_PARAMETER 0xA1
#define RSP_ILLEGAL_POWER_STATE 0xAD
#define RSP_ILLEGAL_VALUE 0xA6
#define RSP_MEMORY 0x82
#define RSP_NO_TARGET_POWER 0xAB
#define RSP_OK 0x80
#define RSP_PARAMETER 0x81
#define RSP_PC 0x84
#define RSP_SELFTEST 0x85
#define RSP_SET_N_PARAMETERS 0xA7
#define RSP_SIGN_ON 0x86
#define RSP_SPI_DATA 0x88

/* ICE events */
#define EVT_BREAK 0xE0
#define EVT_DEBUG 0xE6
#define EVT_ERROR_PHY_FORCE_BREAK_TIMEOUT 0xE2
#define EVT_ERROR_PHY_MAX_BIT_LENGTH_DIFF 0xED
#define EVT_ERROR_PHY_OPT_RECEIVE_TIMEOUT 0xF9
#define EVT_ERROR_PHY_OPT_RECEIVED_BREAK 0xFA
#define EVT_ERROR_PHY_RECEIVED_BREAK 0xF8
#define EVT_ERROR_PHY_RECEIVE_TIMEOUT 0xF7
#define EVT_ERROR_PHY_RELEASE_BREAK_TIMEOUT 0xE3
#define EVT_ERROR_PHY_SYNC_OUT_OF_RANGE 0xF5
#define EVT_ERROR_PHY_SYNC_TIMEOUT 0xF0
#define EVT_ERROR_PHY_SYNC_TIMEOUT_BAUD 0xF4
#define EVT_ERROR_PHY_SYNC_WAIT_TIMEOUT 0xF6
#define EVT_RESULT_PHY_NO_ACTIVITY 0xFB
#define EVT_EXT_RESET 0xE7
#define EVT_ICE_POWER_ERROR_STATE 0xEA
#define EVT_ICE_POWER_OK 0xEB
#define EVT_IDR_DIRTY 0xEC
#define EVT_NONE 0xEF
#define EVT_PDSB_BREAK 0xF2
#define EVT_PDSMB_BREAK 0xF3
#define EVT_PROGRAM_BREAK 0xF1
#define EVT_RUN 0xE1
#define EVT_TARGET_POWER_OFF 0xE5
#define EVT_TARGET_POWER_ON 0xE4
#define EVT_TARGET_SLEEP 0xE8
#define EVT_TARGET_WAKEUP 0xE9

/* memory types for CMND_{READ,WRITE}_MEMORY */
#define MTYPE_IO_SHADOW 0x30	/* cached IO registers? */
#define MTYPE_SRAM 0x20		/* target's SRAM or [ext.] IO registers */
#define MTYPE_EEPROM 0x22	/* EEPROM, what way? */
#define MTYPE_EVENT 0x60	/* ICE event memory */
#define MTYPE_SPM 0xA0		/* flash through LPM/SPM */
#define MTYPE_FLASH_PAGE 0xB0	/* flash in programming mode */
#define MTYPE_EEPROM_PAGE 0xB1	/* EEPROM in programming mode */
#define MTYPE_FUSE_BITS 0xB2	/* fuse bits in programming mode */
#define MTYPE_LOCK_BITS 0xB3	/* lock bits in programming mode */
#define MTYPE_SIGN_JTAG 0xB4	/* signature in programming mode */
#define MTYPE_OSCCAL_BYTE 0xB5	/* osccal cells in programming mode */
#define MTYPE_CAN 0xB6		/* CAN mailbox */
#define MTYPE_FLASH 0xc0	/* xmega flash - undocumented in AVR067 */
#define MTYPE_USERSIG 0xc5	/* xmega user signature - undocumented in AVR067 */
#define MTYPE_PRODSIG 0xc6	/* xmega production signature - undocumented in AVR067 */

/* (some) ICE parameters, for CMND_{GET,SET}_PARAMETER */
#define PAR_HW_VERSION 0x01
#define PAR_FW_VERSION 0x02
#define PAR_EMULATOR_MODE 0x03
# define EMULATOR_MODE_DEBUGWIRE 0x00
# define EMULATOR_MODE_JTAG 0x01
# define EMULATOR_MODE_HV 0x02	/* HVSP or PP mode of AVR Dragon */
# define EMULATOR_MODE_SPI 0x03
# define EMULATOR_MODE_JTAG_AVR32 0x04
# define EMULATOR_MODE_JTAG_XMEGA 0x05
# define EMULATOR_MODE_PDI 0x06
#define PAR_IREG 0x04
#define PAR_BAUD_RATE 0x05
# define PAR_BAUD_2400 0x01
# define PAR_BAUD_4800 0x02
# define PAR_BAUD_9600 0x03
# define PAR_BAUD_19200 0x04	/* default */
# define PAR_BAUD_38400 0x05
# define PAR_BAUD_57600 0x06
# define PAR_BAUD_115200 0x07
# define PAR_BAUD_14400 0x08
#define PAR_OCD_VTARGET 0x06
#define PAR_OCD_JTAG_CLK 0x07
#define PAR_OCD_BREAK_CAUSE 0x08
#define PAR_TIMERS_RUNNING 0x09
#define PAR_BREAK_ON_CHANGE_FLOW 0x0A
#define PAR_BREAK_ADDR1 0x0B
#define PAR_BREAK_ADDR2 0x0C
#define PAR_COMBBREAKCTRL 0x0D
#define PAR_JTAGID 0x0E
#define PAR_UNITS_BEFORE 0x0F
#define PAR_UNITS_AFTER 0x10
#define PAR_BIT_BEFORE 0x11
#define PAR_BIT_ATER 0x12
#define PAR_EXTERNAL_RESET 0x13
#define PAR_FLASH_PAGE_SIZE 0x14
#define PAR_EEPROM_PAGE_SIZE 0x15
#define PAR_UNUSED1 0x16
#define PAR_PSB0 0x17
#define PAR_PSB1 0x18
#define PAR_PROTOCOL_DEBUG_EVENT 0x19
#define PAR_MCU_STATE 0x1A
# define STOPPED 0x00
# define RUNNING 0x01
# define PROGRAMMING 0x02
#define PAR_DAISY_CHAIN_INFO 0x1B
#define PAR_BOOT_ADDRESS 0x1C
#define PAR_TARGET_SIGNATURE 0x1D
#define PAR_DEBUGWIRE_BAUDRATE 0x1E
#define PAR_PROGRAM_ENTRY_POINT 0x1F
#define PAR_PDI_OFFSET_START 0x32
#define PAR_PDI_OFFSET_END 0x33
#define PAR_PACKET_PARSING_ERRORS 0x40
#define PAR_VALID_PACKETS_RECEIVED 0x41
#define PAR_INTERCOMMUNICATION_TX_FAILURES 0x42
#define PAR_INTERCOMMUNICATION_RX_FAILURES 0x43
#define PAR_CRC_ERRORS 0x44
#define PAR_POWER_SOURCE 0x45
# define POWER_EXTERNAL 0x00
# define POWER_USB 0x01
#define PAR_CAN_FLAG 0x22
# define DONT_READ_CAN_MAILBOX 0x00
# define READ_CAN_MAILBOX 0x01
#define PAR_ENABLE_IDR_IN_RUN_MODE 0x23
# define ACCESS_OSCCAL 0x00
# define ACCESS_IDR 0x01
#define PAR_ALLOW_PAGEPROGRAMMING_IN_SCANCHAIN 0x24
# define PAGEPROG_NOT_ALLOWED 0x00
# define PAGEPROG_ALLOWED 0x01

/* Xmega erase memory types, for CMND_XMEGA_ERASE */
#define XMEGA_ERASE_CHIP 0x00
#define XMEGA_ERASE_APP 0x01
#define XMEGA_ERASE_BOOT 0x02
#define XMEGA_ERASE_EEPROM 0x03
#define XMEGA_ERASE_APP_PAGE 0x04
#define XMEGA_ERASE_BOOT_PAGE 0x05
#define XMEGA_ERASE_EEPROM_PAGE 0x06
#define XMEGA_ERASE_USERSIG 0x07

/* AVR32 related definitions */
#define AVR32_FLASHC_FCR                  0xFFFE1400
#define AVR32_FLASHC_FCMD                 0xFFFE1404
#define   AVR32_FLASHC_FCMD_KEY           0xA5000000
#define   AVR32_FLASHC_FCMD_WRITE_PAGE             1
#define   AVR32_FLASHC_FCMD_ERASE_PAGE             2
#define   AVR32_FLASHC_FCMD_CLEAR_PAGE_BUFFER      3
#define   AVR32_FLASHC_FCMD_LOCK                   4
#define   AVR32_FLASHC_FCMD_UNLOCK                 5
#define AVR32_FLASHC_FSR                  0xFFFE1408
#define   AVR32_FLASHC_FSR_RDY            0x00000001
#define   AVR32_FLASHC_FSR_ERR            0x00000008
#define AVR32_FLASHC_FGPFRHI              0xFFFE140C
#define AVR32_FLASHC_FGPFRLO              0xFFFE1410

#define AVR32_DC                          0x00000008
#define AVR32_DS                          0x00000010
#define AVR32_DINST                       0x00000104
#define AVR32_DCCPU                       0x00000110
#define AVR32_DCEMU                       0x00000114
#define AVR32_DCSR                        0x00000118

#define AVR32_DC_ABORT                    0x80000000
#define AVR32_DC_RESET                    0x40000000
#define AVR32_DC_DBE                      0x00002000
#define AVR32_DC_DBR                      0x00001000

#define AVR32_RESET_READ             0x0001
#define AVR32_RESET_WRITE            0x0002
#define AVR32_RESET_CHIP_ERASE       0x0004
#define AVR32_SET4RUNNING            0x0008
//#define AVR32_RESET_COMMON           (AVR32_RESET_READ | AVR32_RESET_WRITE | AVR32_RESET_CHIP_ERASE )


#if !defined(JTAGMKII_PRIVATE_EXPORTED)
/*
 * In appnote AVR067, struct device_descriptor is written with
 * int/long field types.  We cannot use them directly, as they were
 * neither properly aligned for portability, nor did they care for
 * endianess issues.  We thus use arrays of unsigned chars, plus
 * conversion macros.
 */
struct device_descriptor
{
  unsigned char ucReadIO[8]; /*LSB = IOloc 0, MSB = IOloc63 */
  unsigned char ucReadIOShadow[8]; /*LSB = IOloc 0, MSB = IOloc63 */
  unsigned char ucWriteIO[8]; /*LSB = IOloc 0, MSB = IOloc63 */
  unsigned char ucWriteIOShadow[8]; /*LSB = IOloc 0, MSB = IOloc63 */
  unsigned char ucReadExtIO[52]; /*LSB = IOloc 96, MSB = IOloc511 */
  unsigned char ucReadIOExtShadow[52]; /*LSB = IOloc 96, MSB = IOloc511 */
  unsigned char ucWriteExtIO[52]; /*LSB = IOloc 96, MSB = IOloc511 */
  unsigned char ucWriteIOExtShadow[52];/*LSB = IOloc 96, MSB = IOloc511 */
  unsigned char ucIDRAddress; /*IDR address */
  unsigned char ucSPMCRAddress; /*SPMCR Register address and dW BasePC */
  unsigned char ucRAMPZAddress; /*RAMPZ Register address in SRAM I/O */
				/*space */
  unsigned char uiFlashPageSize[2]; /*Device Flash Page Size, Size = */
				/*2 exp ucFlashPageSize */
  unsigned char ucEepromPageSize; /*Device Eeprom Page Size in bytes */
  unsigned char ulBootAddress[4]; /*Device Boot Loader Start Address */
  unsigned char uiUpperExtIOLoc[2]; /*Topmost (last) extended I/O */
				/*location, 0 if no external I/O */
  unsigned char ulFlashSize[4]; /*Device Flash Size */
  unsigned char ucEepromInst[20]; /*Instructions for W/R EEPROM */
  unsigned char ucFlashInst[3]; /*Instructions for W/R FLASH */
  unsigned char ucSPHaddr; /* stack pointer high */
  unsigned char ucSPLaddr; /* stack pointer low */
  /* new as of 16-02-2004 */
  unsigned char uiFlashpages[2]; /* number of pages in flash */
  unsigned char ucDWDRAddress; /* DWDR register address */
  unsigned char ucDWBasePC; /* base/mask value of the PC */
  /* new as of 30-04-2004 */
  unsigned char ucAllowFullPageBitstream; /* FALSE on ALL new */
				/*parts */
  unsigned char uiStartSmallestBootLoaderSection[2]; /* */
  /* new as of 18-10-2004 */
  unsigned char EnablePageProgramming; /* For JTAG parts only, */
				/* default TRUE */
  unsigned char ucCacheType;	/* CacheType_Normal 0x00, */
				/* CacheType_CAN 0x01, */
				/* CacheType_HEIMDALL 0x02 */
				/* new as of 27-10-2004 */
  unsigned char uiSramStartAddr[2]; /* Start of SRAM */
  unsigned char ucResetType; /* Selects reset type. ResetNormal = 0x00 */
                             /* ResetAT76CXXX = 0x01 */
  unsigned char ucPCMaskExtended; /* For parts with extended PC */
  unsigned char ucPCMaskHigh; /* PC high mask */
  unsigned char ucEindAddress; /* Selects reset type. [EIND address...] */
  /* new as of early 2005, firmware 4.x */
  unsigned char EECRAddress[2]; /* EECR memory-mapped IO address */
};
#endif /* JTAGMKII_PRIVATE_EXPORTED */