avrdude/usbdevs.h

83 lines
2.5 KiB
C
Raw Normal View History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2006 Joerg Wunsch
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* $Id$ */
/*
* defines for the USB interface
*/
#ifndef usbdevs_h
#define usbdevs_h
#define USB_VENDOR_ATMEL 1003
#define USB_DEVICE_JTAGICEMKII 0x2103
#define USB_DEVICE_AVRISPMKII 0x2104
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
#define USB_DEVICE_STK600 0x2106
#define USB_DEVICE_AVRDRAGON 0x2107
#define USB_DEVICE_JTAGICE3 0x2110
#define USB_DEVICE_XPLAINEDPRO 0x2111
#define USB_DEVICE_JTAG3_EDBG 0x2140
#define USB_VENDOR_FTDI 0x0403
#define USB_DEVICE_FT2232 0x6010
#define USB_DEVICE_FT245 0x6001
#define USBASP_SHARED_VID 0x16C0 /* VOTI */
#define USBASP_SHARED_PID 0x05DC /* Obdev's free shared PID */
#define USBASP_OLD_VID 0x03EB /* ATMEL */
#define USBASP_OLD_PID 0xC7B4 /* (unoffical) USBasp */
#define USBASP_NIBOBEE_VID 0x16C0 /* VOTI */
#define USBASP_NIBOBEE_PID 0x092F /* NIBObee PID */
// these are specifically assigned to USBtiny,
// if you need your own VID and PIDs you can get them for cheap from
// www.mecanique.co.uk so please don't reuse these. Thanks!
#define USBTINY_VENDOR_DEFAULT 0x1781
#define USBTINY_PRODUCT_DEFAULT 0x0C9F
/* JTAGICEmkII, AVRISPmkII */
#define USBDEV_BULK_EP_WRITE_MKII 0x02
#define USBDEV_BULK_EP_READ_MKII 0x82
#define USBDEV_MAX_XFER_MKII 64
/* STK600 */
#define USBDEV_BULK_EP_WRITE_STK600 0x02
#define USBDEV_BULK_EP_READ_STK600 0x83
/* JTAGICE3 */
#define USBDEV_BULK_EP_WRITE_3 0x01
#define USBDEV_BULK_EP_READ_3 0x82
#define USBDEV_EVT_EP_READ_3 0x83
#define USBDEV_MAX_XFER_3 512
/*
* When operating on the JTAGICE3, usbdev_recv_frame() returns an
* indication in the upper bits of the return value whether the
* message has been received from the event endpoint rather than the
* normal conversation endpoint.
*/
#define USB_RECV_LENGTH_MASK 0x0fff /* up to 4 KiB */
#define USB_RECV_FLAG_EVENT 0x1000
#endif /* usbdevs_h */