avrdude/avrdude.conf.in

1828 lines
66 KiB
Plaintext
Raw Normal View History

# $Id$
#
# AVRDUDE Configuration File
#
# This file contains configuration data used by AVRDUDE which describes
# the programming hardware pinouts and also provides part definitions.
# AVRDUDE's "-C" command line option specifies the location of the
# configuration file. The "-c" option names the programmer configuration
# which must match one of the entry's "id" parameter. The "-p" option
# identifies which part AVRDUDE is going to be programming and must match
# one of the parts' "id" parameter.
#
# Possible entry formats are:
#
# programmer
# id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# type = par | stk500 | avr910; # programmer type
# vcc = <num1> [, <num2> ... ] ; # pin number(s)
# reset = <num> ; # pin number
# sck = <num> ; # pin number
# mosi = <num> ; # pin number
# miso = <num> ; # pin number
# errled = <num> ; # pin number
# rdyled = <num> ; # pin number
# pgmled = <num> ; # pin number
# vfyled = <num> ; # pin number
# ;
#
# part
# id = <id> ; # quoted string
# desc = <description> ; # quoted string
# devicecode = <num> ; # deprecated, use stk500_devcode
# stk500_devcode = <num> ; # numeric
# avr910_devcode = <num> ; # numeric
# chip_erase_delay = <num> ; # micro-seconds
# pagel = <num> ; # pin name in hex, i.e., 0xD7
# bs2 = <num> ; # pin name in hex, i.e., 0xA0
# reset = dedicated | io;
# retry_pulse = reset | sck;
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
# memory <memtype>
# paged = <yes/no> ; # yes / no
# size = <num> ; # bytes
# page_size = <num> ; # bytes
# num_pages = <num> ; # numeric
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value
# pwroff_after_write = <yes/no> ; # yes / no
# read = <instruction format> ;
# write = <instruction format> ;
# read_lo = <instruction format> ;
# read_hi = <instruction format> ;
# write_lo = <instruction format> ;
# write_hi = <instruction format> ;
# loadpage_lo = <instruction format> ;
# loadpage_hi = <instruction format> ;
# writepage = <instruction format> ;
# ;
# ;
#
# If any of the above parameters are not specified, the default value
# of 0 is used for numerics or the empty string ("") for string
# values. If a required parameter is left empty, AVRDUDE will
# complain.
#
# NOTES:
# * 'devicecode' is the device code used by the STK500 (see codes
# listed below)
# * Not all memory types will implement all instructions.
# * AVR Fuse bits and Lock bits are implemented as a type of memory.
# * Example memory types are:
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high
# fuse), "signature", "calibration", "lock"
# * The memory type specified on the avrdude command line must match
# one of the memory types defined for the specified chip.
# * The pwroff_after_write flag causes avrdude to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message
# indicating that the device needs a power-cycle is printed out.
# This flag was added to work around a problem with the
# at90s4433/2333's; see the at90s4433 errata at:
#
# http://www.atmel.com/atmel/acrobat/doc1280.pdf
#
# INSTRUCTION FORMATS
#
# Instruction formats are specified as a comma seperated list of
# string values containing information (bit specifiers) about each
# of the 32 bits of the instruction. Bit specifiers may be one of
# the following formats:
#
# '1' = the bit is always set on input as well as output
#
# '0' = the bit is always clear on input as well as output
#
# 'x' = the bit is ignored on input and output
#
# 'a' = the bit is an address bit, the bit-number matches this bit
# specifier's position within the current instruction byte
#
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12
# is address bit 12 on input, a0 is address bit 0.
#
# 'i' = the bit is an input data bit
#
# 'o' = the bit is an output data bit
#
# Each instruction must be composed of 32 bit specifiers. The
# instruction specification closely follows the instruction data
# provided in Atmel's data sheets for their parts.
#
# See below for some examples.
#
#
# The following are STK500 part device codes to use for the
# "devicecode" field of the part. These came from Atmel's software
# section avr061.zip which accompanies the application note
# AVR061 available from:
#
# http://www.atmel.com/atmel/acrobat/doc2525.pdf
#
#define ATTINY10 0x10
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
#
# Overall avrdude defaults
#
default_parallel = "@DEFAULT_PAR_PORT@";
default_serial = "@DEFAULT_SER_PORT@";
#
# PROGRAMMER DEFINITIONS
#
programmer
id = "bsd";
desc = "Brian Dean's Programmer";
type = par;
vcc = 2, 3, 4, 5;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
;
programmer
id = "avrisp";
desc = "Atmel AVR ISP";
type = stk500;
;
programmer
id = "stk500";
desc = "Atmel STK500";
type = stk500;
;
programmer
id = "avr910";
desc = "Atmel Low Cost Serial Programmer";
type = avr910;
;
programmer
id = "pavr";
desc = "Jason Kyle's pAVR Serial Programmer";
type = avr910;
;
programmer
id = "stk200";
desc = "STK200";
type = par;
buff = 4, 5;
sck = 6;
mosi = 7;
reset = 9;
miso = 10;
;
# The programming dongle used by the popular Ponyprog
# utility. It is almost similar to the STK200 one,
# except that there is a LED indicating that the
# programming is currently in progress.
programmer
id = "pony";
desc = "Pony Prog";
type = par;
buff = 4, 5;
sck = 6;
mosi = 7;
reset = 9;
miso = 10;
pgmled = 8;
;
programmer
id = "dt006";
desc = "Dontronics DT006";
type = par;
reset = 4;
sck = 5;
mosi = 2;
miso = 11;
;
programmer
id = "bascom";
desc = "Bascom SAMPLE programming cable";
type = par;
reset = 4;
sck = 5;
mosi = 2;
miso = 11;
;
programmer
id = "alf";
desc = "Tony Friebel's Programmer";
type = par;
vcc = 2, 3, 4, 5;
buff = 6;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
errled = 1;
rdyled = 14;
pgmled = 16;
vfyled = 17;
;
#
# PART DEFINITIONS
#
#------------------------------------------------------------
# ATtiny15
#------------------------------------------------------------
part
id = "t15";
desc = "ATtiny15";
stk500_devcode = 0x13;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 64;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 1024;
min_write_delay = 4500;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "fuse"
size = 1;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x o o o o x x o o";
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x",
"x x x x x x x x i i i i 1 1 i i";
;
;
#------------------------------------------------------------
# AT90s1200
#------------------------------------------------------------
part
id = "1200";
desc = "AT90S1200";
stk500_devcode = 0x33;
avr910_devcode = 0x13;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 64;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 1024;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4414
#------------------------------------------------------------
part
id = "4414";
desc = "AT90S4414";
stk500_devcode = 0x50;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90s2313
#------------------------------------------------------------
part
id = "2313";
desc = "AT90S2313";
stk500_devcode = 0x40;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s2333
#------------------------------------------------------------
part
id = "2333";
desc = "AT90S2333";
stk500_devcode = 0x42;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s2343
#------------------------------------------------------------
part
id = "2343";
desc = "AT90S2343";
chip_erase_delay = 18000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o o x x x x o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o o x x x x o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4433
#------------------------------------------------------------
part
id = "4433";
desc = "AT90S4433";
stk500_devcode = 0x51;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4434
#------------------------------------------------------------
part
id = "4434";
desc = "AT90S4434";
stk500_devcode = 0x52;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s8515
#------------------------------------------------------------
part
id = "8515";
desc = "AT90S8515";
stk500_devcode = 0x60;
avr910_devcode = 0x38;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 8192;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x x o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o x x x x x x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s8535
#------------------------------------------------------------
part
id = "8535";
desc = "AT90S8535";
stk500_devcode = 0x61;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 8192;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega103
#------------------------------------------------------------
part
id = "m103";
desc = "ATMEGA103";
stk500_devcode = 0xB1;
chip_erase_delay = 112000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 4096;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 22000;
max_write_delay = 56000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
;
memory "fuse"
size = 1;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o x o 1 o o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega128
#------------------------------------------------------------
part
id = "m128";
desc = "ATMEGA128";
stk500_devcode = 0xB2;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega16
#------------------------------------------------------------
part
id = "m16";
desc = "ATMEGA16";
stk500_devcode = 0x82;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega163
#------------------------------------------------------------
part
id = "m163";
desc = "ATMEGA163";
stk500_devcode = 0x81;
chip_erase_delay = 32000;
pagel = 0xd7;
bs2 = 0xa0;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 16000;
max_write_delay = 16000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o x x o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i 1 1 i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x 1 o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x 0 x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega169
#------------------------------------------------------------
part
id = "m169";
desc = "ATMEGA169";
stk500_devcode = 0x85;
chip_erase_delay = 32000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 16000;
max_write_delay = 16000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega32
#------------------------------------------------------------
part
id = "m32";
desc = "ATMEGA32";
stk500_devcode = 0x91;
chip_erase_delay = 32000;
pagel = 0xd7;
bs2 = 0xa0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega8
#------------------------------------------------------------
part
id = "m8";
desc = "ATMEGA8";
stk500_devcode = 0x70;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;