avrdude/usb_libusb.c

484 lines
11 KiB
C
Raw Normal View History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2005,2006 Joerg Wunsch
* Copyright (C) 2006 David Moore
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* $Id$ */
/*
* USB interface via libusb for avrdude.
*/
#include "ac_cfg.h"
#if defined(HAVE_LIBUSB)
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/time.h>
#include <usb.h>
#include "avrdude.h"
#include "serial.h"
#include "usbdevs.h"
#if defined(WIN32NATIVE)
/* someone has defined "interface" to "struct" in Cygwin */
# undef interface
#endif
static char usbbuf[USBDEV_MAX_XFER];
static int buflen = -1, bufptr;
static int usb_interface;
/*
* The "baud" parameter is meaningless for USB devices, so we reuse it
* to pass the desired USB device ID.
*/
static void usbdev_open(char * port, long baud, union filedescriptor *fd)
{
char string[256];
char product[256];
struct usb_bus *bus;
struct usb_device *dev;
usb_dev_handle *udev;
char *serno, *cp2;
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
int i;
size_t x;
/*
* The syntax for usb devices is defined as:
*
* -P usb[:serialnumber]
*
* See if we've got a serial number passed here. The serial number
* might contain colons which we remove below, and we compare it
* right-to-left, so only the least significant nibbles need to be
* specified.
*/
if ((serno = strchr(port, ':')) != NULL)
{
/* first, drop all colons there if any */
cp2 = ++serno;
while ((cp2 = strchr(cp2, ':')) != NULL)
{
x = strlen(cp2) - 1;
memmove(cp2, cp2 + 1, x);
cp2[x] = '\0';
}
if (strlen(serno) > 12)
{
fprintf(stderr,
"%s: usbdev_open(): invalid serial number \"%s\"\n",
progname, serno);
exit(1);
}
}
usb_init();
usb_find_busses();
usb_find_devices();
for (bus = usb_get_busses(); bus; bus = bus->next)
{
for (dev = bus->devices; dev; dev = dev->next)
{
udev = usb_open(dev);
if (udev)
{
if (dev->descriptor.idVendor == USB_VENDOR_ATMEL &&
dev->descriptor.idProduct == (unsigned short)baud)
{
/* yeah, we found something */
if (usb_get_string_simple(udev,
dev->descriptor.iSerialNumber,
string, sizeof(string)) < 0)
{
fprintf(stderr,
"%s: usb_open(): cannot read serial number \"%s\"\n",
progname, usb_strerror());
/*
* On some systems, libusb appears to have
* problems sending control messages. Catch the
* benign case where the user did not request a
* particular serial number, so we could
* continue anyway.
*/
if (serno != NULL)
exit(1); /* no chance */
else
strcpy(string, "[unknown]");
}
if (usb_get_string_simple(udev,
dev->descriptor.iProduct,
product, sizeof(product)) < 0)
{
fprintf(stderr,
"%s: usb_open(): cannot read product name \"%s\"\n",
progname, usb_strerror());
strcpy(product, "[unnamed product]");
}
if (verbose)
fprintf(stderr,
"%s: usbdev_open(): Found %s, serno: %s\n",
progname, product, string);
if (serno != NULL)
{
/*
* See if the serial number requested by the
* user matches what we found, matching
* right-to-left.
*/
x = strlen(string) - strlen(serno);
if (strcasecmp(string + x, serno) != 0)
{
if (verbose > 2)
fprintf(stderr,
"%s: usbdev_open(): serial number doesn't match\n",
progname);
usb_close(udev);
continue;
}
}
if (dev->config == NULL)
{
fprintf(stderr,
"%s: usbdev_open(): USB device has no configuration\n",
progname);
goto trynext;
}
if (usb_set_configuration(udev, dev->config[0].bConfigurationValue))
{
fprintf(stderr,
"%s: usbdev_open(): error setting configuration %d: %s\n",
progname, dev->config[0].bConfigurationValue,
usb_strerror());
goto trynext;
}
usb_interface = dev->config[0].interface[0].altsetting[0].bInterfaceNumber;
if (usb_claim_interface(udev, usb_interface))
{
fprintf(stderr,
"%s: usbdev_open(): error claiming interface %d: %s\n",
progname, usb_interface, usb_strerror());
goto trynext;
}
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
fd->usb.handle = udev;
fd->usb.ep = -1;
/* Try finding out what our read endpoint is. */
for (i = 0; i < dev->config[0].interface[0].altsetting[0].bNumEndpoints; i++)
{
int possible_ep = dev->config[0].interface[0].altsetting[0].
endpoint[i].bEndpointAddress;
if ((possible_ep & USB_ENDPOINT_DIR_MASK) != 0)
{
if (verbose > 1)
{
fprintf(stderr,
"%s: usbdev_open(): using read endpoint 0x%02x\n",
progname, possible_ep);
}
fd->usb.ep = possible_ep;
break;
}
}
if (fd->usb.ep == -1)
{
fprintf(stderr,
"%s: usbdev_open(): cannot find a read endpoint, using 0x%02x\n",
progname, USBDEV_BULK_EP_READ);
fd->usb.ep = USBDEV_BULK_EP_READ;
}
return;
}
trynext:
usb_close(udev);
}
}
}
fprintf(stderr, "%s: usbdev_open(): did not find any%s USB device \"%s\"\n",
progname, serno? " (matching)": "", port);
exit(1);
}
static void usbdev_close(union filedescriptor *fd)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_dev_handle *udev = (usb_dev_handle *)fd->usb.handle;
(void)usb_release_interface(udev, usb_interface);
#if defined(__FreeBSD__)
/*
* Without this reset, the AVRISP mkII seems to stall the second
* time we try to connect to it. This is not necessary on
* FreeBSD.
*/
usb_reset(udev);
#endif
usb_close(udev);
}
static int usbdev_send(union filedescriptor *fd, unsigned char *bp, size_t mlen)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_dev_handle *udev = (usb_dev_handle *)fd->usb.handle;
int rv;
int i = mlen;
unsigned char * p = bp;
int tx_size;
/*
* Split the frame into multiple packets. It's important to make
* sure we finish with a short packet, or else the device won't know
* the frame is finished. For example, if we need to send 64 bytes,
* we must send a packet of length 64 followed by a packet of length
* 0.
*/
do {
tx_size = (mlen < USBDEV_MAX_XFER)? mlen: USBDEV_MAX_XFER;
rv = usb_bulk_write(udev, USBDEV_BULK_EP_WRITE, (char *)bp, tx_size, 5000);
if (rv != tx_size)
{
fprintf(stderr, "%s: usbdev_send(): wrote %d out of %d bytes, err = %s\n",
progname, rv, tx_size, usb_strerror());
return -1;
}
bp += tx_size;
mlen -= tx_size;
} while (tx_size == USBDEV_MAX_XFER);
if (verbose > 3)
{
fprintf(stderr, "%s: Sent: ", progname);
while (i) {
unsigned char c = *p;
if (isprint(c)) {
fprintf(stderr, "%c ", c);
}
else {
fprintf(stderr, ". ");
}
fprintf(stderr, "[%02x] ", c);
p++;
i--;
}
fprintf(stderr, "\n");
}
return 0;
}
/*
* As calls to usb_bulk_read() result in exactly one USB request, we
* have to buffer the read results ourselves, so the single-char read
* requests performed by the upper layers will be handled. In order
* to do this, we maintain a private buffer of what we've got so far,
* and transparently issue another USB read request if the buffer is
* empty and more data are requested.
*/
static int
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_fill_buf(usb_dev_handle *udev, int ep)
{
int rv;
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
rv = usb_bulk_read(udev, ep, usbbuf, USBDEV_MAX_XFER, 5000);
if (rv < 0)
{
if (verbose > 1)
fprintf(stderr, "%s: usb_fill_buf(): usb_bulk_read() error %s\n",
progname, usb_strerror());
return -1;
}
buflen = rv;
bufptr = 0;
return 0;
}
static int usbdev_recv(union filedescriptor *fd, unsigned char *buf, size_t nbytes)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_dev_handle *udev = (usb_dev_handle *)fd->usb.handle;
int i, amnt;
unsigned char * p = buf;
for (i = 0; nbytes > 0;)
{
if (buflen <= bufptr)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
if (usb_fill_buf(udev, fd->usb.ep) < 0)
return -1;
}
amnt = buflen - bufptr > nbytes? nbytes: buflen - bufptr;
memcpy(buf + i, usbbuf + bufptr, amnt);
bufptr += amnt;
nbytes -= amnt;
i += amnt;
}
if (verbose > 3)
{
fprintf(stderr, "%s: Recv: ", progname);
while (i) {
unsigned char c = *p;
if (isprint(c)) {
fprintf(stderr, "%c ", c);
}
else {
fprintf(stderr, ". ");
}
fprintf(stderr, "[%02x] ", c);
p++;
i--;
}
fprintf(stderr, "\n");
}
return 0;
}
/*
* This version of recv keeps reading packets until we receive a short
* packet. Then, the entire frame is assembled and returned to the
* user. The length will be unknown in advance, so we return the
* length as the return value of this function, or -1 in case of an
* error.
*
* This is used for the AVRISP mkII device.
*/
static int usbdev_recv_frame(union filedescriptor *fd, unsigned char *buf, size_t nbytes)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_dev_handle *udev = (usb_dev_handle *)fd->usb.handle;
int rv, n;
int i;
unsigned char * p = buf;
n = 0;
do
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
rv = usb_bulk_read(udev, fd->usb.ep, usbbuf,
USBDEV_MAX_XFER, 10000);
if (rv < 0)
{
if (verbose > 1)
fprintf(stderr, "%s: usbdev_recv_frame(): usb_bulk_read(): %s\n",
progname, usb_strerror());
return -1;
}
if (rv <= nbytes)
{
memcpy (buf, usbbuf, rv);
buf += rv;
}
n += rv;
nbytes -= rv;
}
while (rv == USBDEV_MAX_XFER);
if (nbytes < 0)
return -1;
if (verbose > 3)
{
i = n;
fprintf(stderr, "%s: Recv: ", progname);
while (i) {
unsigned char c = *p;
if (isprint(c)) {
fprintf(stderr, "%c ", c);
}
else {
fprintf(stderr, ". ");
}
fprintf(stderr, "[%02x] ", c);
p++;
i--;
}
fprintf(stderr, "\n");
}
return n;
}
static int usbdev_drain(union filedescriptor *fd, int display)
{
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
usb_dev_handle *udev = (usb_dev_handle *)fd->usb.handle;
int rv;
do {
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
rv = usb_bulk_read(udev, fd->usb.ep, usbbuf, USBDEV_MAX_XFER, 100);
if (rv > 0 && verbose >= 4)
fprintf(stderr, "%s: usbdev_drain(): flushed %d characters\n",
progname, rv);
} while (rv > 0);
return 0;
}
/*
* Device descriptor for the JTAG ICE mkII.
*/
struct serial_device usb_serdev =
{
.open = usbdev_open,
.close = usbdev_close,
.send = usbdev_send,
.recv = usbdev_recv,
.drain = usbdev_drain,
.flags = SERDEV_FL_NONE,
};
/*
* Device descriptor for the AVRISP mkII.
*/
struct serial_device usb_serdev_frame =
{
.open = usbdev_open,
.close = usbdev_close,
.send = usbdev_send,
.recv = usbdev_recv_frame,
.drain = usbdev_drain,
.flags = SERDEV_FL_NONE,
};
#endif /* HAVE_LIBUSB */