avrdude/src/ppiwin.c

327 lines
6.3 KiB
C
Raw Permalink Normal View History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2003, 2004, 2006
* Eric B. Weddington <eweddington@cso.atmel.com>
* Copyright 2008, Joerg Wunsch
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* $Id$ */
/*
This is the parallel port interface for Windows built using Cygwin.
In the ppi_* functions that access the parallel port registers,
fd = parallel port address
reg = register as defined in an enum in ppi.h. This must be converted
to a proper offset of the base address.
*/
#include "ac_cfg.h"
2022-01-07 12:15:55 +00:00
#if defined(HAVE_PARPORT) && defined(WIN32)
2022-01-07 12:15:55 +00:00
#define WIN32_LEAN_AND_MEAN
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <windows.h>
#include <sys/time.h>
#include <windows.h>
#include "avrdude.h"
#include "libavrdude.h"
#include "ppi.h"
#define DEVICE_LPT1 "lpt1"
#define DEVICE_LPT2 "lpt2"
#define DEVICE_LPT3 "lpt3"
#define DEVICE_MAX 3
typedef struct
{
const char *name;
int base_address;
} winpp;
static const winpp winports[DEVICE_MAX] =
{
{DEVICE_LPT1, 0x378},
{DEVICE_LPT2, 0x278},
{DEVICE_LPT3, 0x3BC},
};
/* FUNCTION PROTOTYPES */
static int winnt_pp_open(void);
static unsigned short port_get(union filedescriptor *fdp, int reg);
static unsigned char reg2offset(int reg);
static unsigned char inb(unsigned short port);
static void outb(unsigned char value, unsigned short port);
/* FUNCTION DEFINITIONS */
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
void ppi_open(const char *port, union filedescriptor *fdp) {
unsigned char i;
int fd;
fd = winnt_pp_open();
if(fd < 0)
{
pmsg_ext_error("cannot open device \"giveio\"\n\n"); // giveio?!? FIXME!
fdp->ifd = -1;
return;
}
/* Search the windows port names for a match */
fd = -1;
for(i = 0; i < DEVICE_MAX; i++)
{
if(strcmp(winports[i].name, port) == 0)
{
/* Set the file descriptor with the Windows parallel port base address. */
fd = winports[i].base_address;
break;
}
}
if(fd == -1)
{
/*
* Supplied port name did not match any of the pre-defined
* names. Try interpreting it as a numeric
* (hexadecimal/decimal/octal) address.
*/
char *cp;
fd = strtol(port, &cp, 0);
if(*port == '\0' || *cp != '\0')
{
pmsg_error("port %s is neither lpt1/2/3 nor valid number\n", port);
fd = -1;
}
}
if(fd < 0)
{
pmsg_ext_error("cannot open port %s\n\n", port);
fdp->ifd = -1;
return;
}
fdp->ifd = fd;
}
#define DRIVERNAME "\\\\.\\giveio"
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
static int winnt_pp_open(void) {
// Only try to use giveio under Windows NT/2000/XP.
OSVERSIONINFO ver_info;
memset(&ver_info, 0, sizeof(ver_info));
ver_info.dwOSVersionInfoSize = sizeof(ver_info);
if(!GetVersionEx(&ver_info))
{
return(-1);
}
else if(ver_info.dwPlatformId == VER_PLATFORM_WIN32_NT)
{
HANDLE h = CreateFile(DRIVERNAME,
GENERIC_READ,
0,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL);
if(h == INVALID_HANDLE_VALUE)
{
return(-1);
}
/* Close immediately. The process now has the rights it needs. */
if(h != NULL)
{
CloseHandle(h);
}
}
return(0);
}
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
void ppi_close(const union filedescriptor *fdp) {
return;
}
/*
* set the indicated bit of the specified register.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_set(const union filedescriptor *fdp, int reg, int bit) {
unsigned char v;
unsigned short port;
port = port_get(fdp, reg);
v = inb(port);
v |= bit;
outb(v, port);
return 0;
}
/*
* clear the indicated bit of the specified register.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_clr(const union filedescriptor *fdp, int reg, int bit) {
unsigned char v;
unsigned short port;
port = port_get(fdp, reg);
v = inb(port);
v &= ~bit;
outb(v, port);
return 0;
}
/*
* get the indicated bit of the specified register.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_get(const union filedescriptor *fdp, int reg, int bit) {
unsigned char v;
v = inb(port_get(fdp, reg));
v &= bit;
return(v);
}
/*
* toggle the indicated bit of the specified register.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_toggle(const union filedescriptor *fdp, int reg, int bit) {
unsigned char v;
unsigned short port;
port = port_get(fdp, reg);
v = inb(port);
v ^= bit;
outb(v, port);
return 0;
}
/*
* get all bits of the specified register.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_getall(const union filedescriptor *fdp, int reg) {
unsigned char v;
v = inb(port_get(fdp, reg));
return((int)v);
}
/*
* set all bits of the specified register to val.
*/
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
int ppi_setall(const union filedescriptor *fdp, int reg, int val) {
outb((unsigned char)val, port_get(fdp, reg));
return 0;
}
/* Calculate port address to access. */
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
static unsigned short port_get(const union filedescriptor *fdp, int reg) {
return((unsigned short)(fdp->ifd + reg2offset(reg)));
}
/* Convert register enum to offset of base address. */
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
static unsigned char reg2offset(int reg) {
unsigned char offset = 0;
switch(reg)
{
case PPIDATA:
{
offset = 0;
break;
}
case PPISTATUS:
{
offset = 1;
break;
}
case PPICTRL:
{
offset = 2;
break;
}
}
return(offset);
}
/* Read in value from port. */
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
static unsigned char inb(unsigned short port) {
unsigned char t;
asm volatile ("in %1, %0"
: "=a" (t)
: "d" (port));
return t;
}
/* Write value to port. */
Use const in PROGRAMMER function arguments where appropriate In order to get meaningful const properties for the PROGRAMMER, AVRPART and AVRMEM arguments, some code needed to be moved around, otherwise a network of "tainted" assignments risked rendering nothing const: - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm, const AVRPART *p); this allows changes in the PROGRAMMER structure after the part is known. For example, use TPI, UPDI, PDI functions in that programmer appropriate to the part. This used to be done later in the process, eg, in the initialize() function, which "taints" all other programmer functions wrt const and sometimes requires other finessing with flags etc. Much clearer with the modified enable() interface. - Move TPI initpgm-type code from initialize() to enable() --- note that initpgm() does not have the info at the time when it is called whether or not TPI is required - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate modification of the flag does not change PROGRAMMER structure) - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and FLAGS32_WRITE bits - Move the xbeeResetPin component to private data in stk500.c as this is needed by xbee when it saddles on the stk500 code (previously, the flags component of the part was re-dedicated to this) - Change the way the "chained" private data are used in jtag3.c whilst keeping the PROGRAMMER structure read-only otherwise - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to stk500v2_enable() so the former keeps the PROGRAMMER structure read-only (for const assertion). - In usbasp change the code from changing PROGRAMMER functions late to dispatching to TPI or regular SPI protocol functions at runtime; reason being the decision whether to use TPI protocol is done at run-time depending on the capability of the attached programmer Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 15:05:28 +00:00
static void outb(unsigned char value, unsigned short port) {
asm volatile ("out %1, %0"
:
: "d" (port), "a" (value) );
return;
}
#endif